• Economic and Environmental Geology
• /
• 제43권2호
• /
• pp.197-205
• /
• 2010

Recently abrupt climate changes have been occurred in global and regional scales and $CO_2$ reduction technologies became an important solution for global warming. As a method of the solution shallow underground thermal energy storage (UTES) has been applied as a reliable technology in most countries developing renewable energy. The geothermal energy system using thermal source of soil, rock, and ground water in aquifer or cavern located in shallow ground is designed based on the concept of thermal energy recovery and storage. UTES technology of Korea is in early stage and consistent researches are demanded to develop environmental friendly, economical and efficient UTES systems. Aquifers in Korea are suitable for various type of ground water source heat pump system. However due to poor understanding and regulations on various UTES high efficient geothermal systems have not been developed. Therefore simple closed U-tube type geothermal heat pump systems account for more than 90% of the total geothermal system installation in Korea. To prevent becoming wide-spread of inefficient systems, UTES systems considering to the hydrogeothemal properties of the ground should be developed and installed. Also international collaboration is necessary, and continuous UTES researches can improve the efficiency of shallow geothermal systems.

• Journal of dental hygiene science
• /
• 제13권4호
• /
• pp.359-368
• /
• 2013

This study aimed to evaluate conditions and performance of quality improvement (QI) activity in Korean dental hospitals. Twenty one representative dental hospitals in Korea were selected by the selection criteria. A questionnaire was implemented to measure awareness, perceived needs, educations, conferences, works, activating/obstructive factors and satisfaction related to QI activities. Satisfaction score range from 0 (lowest) to 5 (highest) among 329 dental hygienists who worked in the selected 21 dental hospitals. Implementation rate of programs on external customer satisfaction was the highest 59.9% in QI activities, and reduction of expenses (59.4%), Improvement in health care quality (58.7), risk management (52.8) were followed, while improvement in work efficiency (46.5) showed the lowest implementation rate. The most influencing factor accelerating QI activities was 'active participation of hospital workers' (54.7%), and 'effort to improve customer satisfaction' (44.7%) followed. The most influencing QI related obstructive factor was 'lack of QI-related manpower and support' (47.1%). A balanced development including QI programs with lower implementation rates is necessary. Encouraging participation of workers may be the most important in developing dental QI activities further.

• Journal of Digital Convergence
• /
• 제14권6호
• /
• pp.9-19
• /
• 2016

Since continuous expand in governmental R&D investments and growth number of research institutions, model of multi-agency program has been planned and pushed ahead to settle the inefficiency of investment by the scattered and competitive R&D Programs. However, it was often pointed out that new model's effect has been fall because the institutional inertia of cooperative system between agencies. In this study, we analyze the current state of multi-agency program and suggest the optimal R&D governance model to improve a better direction. Afterward, several problems were turned up and that allocation and execution of the R&D budget separately, less coordination and cooperation among agencies, and absence of typical evaluation system of multi-agency program. Therefore, we suggest some of improvements by analyzing each steps.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.521-524
• /
• 2008

The main goal of construction projects from the past has been enhancing efficiency by reducing cost and time. Compared to this, it is true that for a long time not much attention was paid to safety management. For this reason, safety management is much behind cost and time management but nevertheless, not much improvement has been made. The current safety management is only focused on managing after an occurrence based on knowledge like safety standards and rules. Even though safety accident is reducing in domestic construction projects, the extent of a accident is getting greater because construction projects are getting more complex and sophisticated. Moreover, the actual loss due to accident is increasing and the severeness of a hazard is getting worse. Therefore, to improve the current conditions of safety management, we propose a more effective safety management program. This program is a safety managing method using virtual reality. Property, entity, safety library is applied and finally, aims to continuously manage and prevent rather than deal with an accident/disaster after it happens.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• 제49권2호
• /
• pp.83-93
• /
• 2012

This paper proposes a method to efficiently encode multi-view color videos and depth maps. The proposed coding method for multi-view color videos and depth maps can improve the coding efficiency by additional inter-view prediction, as well as inter-frame prediction. By means of the proposed method, we achieved the coding gain of approximately 55% for 2-view color videos and approximately 12% for 2-view depth maps. For 3-view case, we found that the proposed system yields 54% of coding gain from outer view color videos and 56% of coding gain from center view color videos, respectively. Moreover, for 3-view depth map case, approximately 11% of coding gain from outer view and 13% of coding gain from center view are obtained with the proposed coder, respectively.

• Journal of Korea Water Resources Association
• /
• 제46권11호
• /
• pp.1041-1052
• /
• 2013

In this study, we estimate parameters of a distributed hydrologic model, GRM (grid based rainfall-runoff model), using a model-independent parameter estimation tool, PEST. We implement auto calibration of model parameters such as initial soil moisture, multipliers of overland roughness and soil hydraulic conductivity in the Geumho River Catchment and the Gamcheon Catchment using radar rainfall estimates and ground-observed rainfall represented by Thiessen interpolation. Automatic calibration is performed by GRM-MP (multiple projects), a modified version of GRM without GUI (graphic user interface) implementation, and "Parallel PEST" to improve estimation efficiency. Although ground rainfall shows similar or higher cumulative amount compared to radar rainfall in the areal average, high spatial variation is found only in radar rainfall. In terms of accuracy of hydrologic simulations, radar rainfall is equivalent or superior to ground rainfall. In the case of radar rainfall, the estimated multiplier of soil hydraulic conductivity is lower than 1, which may be affected by high rainfall intensity of radar rainfall. Other parameters such as initial soil moisture and the multiplier of overland roughness do not show consistent trends in the calibration results. Overall, calibrated parameters show different patterns in radar and ground rainfall, which should be carefully considered in the rainfall-runoff modelling applications using radar rainfall.

• Journal of the Korean Chemical Society
• /
• 제53권6호
• /
• pp.653-662
• /
• 2009

Developing effective tools for predicting absorption, distribution, metabolism, excretion properties and toxicity (ADME/T) of new chemical entities in the early stage of drug design is one of the most important tasks in drug discovery and development today. As one of these attempts, support vector machines (SVM) has recently been exploited for the prediction of ADME/T related properties. However, two problems in SVM modeling, i.e. feature selection and parameters setting, are still far from solved. The two problems have been shown to be crucial to the efficiency and accuracy of SVM classification. In particular, the feature selection and optimal SVM parameters setting influence each other, which indicates that they should be dealt with simultaneously. In this account, we present an integrated practical solution, in which genetic-based algorithm (GA) is used for feature selection and grid search (GS) method for parameters optimization. hERG ion-channel inhibitor classification models of ADME/T related properties has been built for assessing and testing the proposed GA-GS-SVM. We generated 6 different models that are 3 different single models and 3 different ensemble models using training set - 1891 compounds and validated with external test set - 175 compounds. We compared single model with ensemble model to solve data imbalance problems. It was able to improve accuracy of prediction to use ensemble model.

• Journal of Korea Water Resources Association
• /
• 제41권5호
• /
• pp.517-525
• /
• 2008

Regional rainfall quantile depends on the identification of hydrologically homogeneous regions. Various variables relevant to precipitation can be used to form regions. Since the type and number of variables may lead to improve the efficiency of partitioning, it is important to select those precipitation related variables, which represent most of the information from all candidate variables. Multivariate analysis techniques can be used for this purpose. Procrustes analysis which can decrease the dimension of variables based on their correlations, are applied in this study. 42 rainfall related variables are decreased into 21 ones by Procrustes analysis. Factor analysis is applied to those selected variables and then 5 factors are extracted. Fuzzy-c means technique classifies 68 stations into 6 regions. As a result, the GEV distributions are fitted to 6 regions while the lognormal and generalized logistic distributions are fitted to 5 regions. For the comparison purpose with previous results, rainfall quantiles based on generalized logistic distribution are estimated by at-site frequency analysis, index flood method, and regional shape estimation method.

• Journal of Korean Society of Transportation
• /
• 제20권7호
• /
• pp.43-50
• /
• 2002

Competition to attract the increasing container cargoes of North China and the West Japan in North-East Asia region is fairly intensed in recent days between the main ports of Korea, China, and Japan. Inducing a new container cargo make those countries possible to invest enormous fund to mordernize its port facilities, as well as to improve efficiency in Port operation and management. In this situation, Strategy to attract transshipment cargoes is of the immediate necessity, This study, therefore, aims to establish the feasible strategies to attract transshipment container cargoes in the North-East Asian region by empirical analysis, he major output of the research is as follows : First, Busan Port to attract transshipment cargoes is required to adjust port tariff and free storage period with flexibility for liner shipping companies and freight forwarder. Second, Price-Demand function of Busan port between main competitive ports in North-East Asian region that is derived from strategies to attract transshipment cargoes, helps marketing manager to fix scientifically port price as understanding the change of demand quantity.

• Journal of the Korea Computer Industry Society
• /
• 제3권1호
• /
• pp.9-18
• /
• 2002

Under the quickly changing health care environment in our society competitions among hospitals are getting harder and accordingly the hospital authorities do their best efforts to renovate their hospital management and let directors of food and nutrition services in hospital be seeking the drastic changes in their clinic-support operations. To attain this end it is essential to build an information system in food and nutrition services in hospital for practicing those operational changes efficiently. By building an information system we can totally manage a number of information about hospital food and nutrition services. This kind of information system can not only relieve dieticians and food-service workers from their repetitively routine jobs, but also connect with hospital management information systems organically. Resultantly productivity in this service area can be improved and the efficiency of hospital management will be increased. And accordingly the competitive advantage of the hospital can be greater than ever and that brings patients' and hospital employees' satisfaction. I would like to name this kind of information system for hospital food and nutrition services "TASTY", abbreviated from "Time-based Advanced Service Technology for Yong-Dong Severance Hospital, Nutrition Department" There are one basic information management area and five business management areas in TASTY. Five specific business areas are divided by menu, procurement, clinical nutrition service, production(including distribution and meal service), and financial management.inancial management.