• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1119-1122
• /
• 2004

In the UV-NIL process using an elementwise patterned stamp (EPS), which includes channels formed to separate each element with patterns, low-viscosity resin droplets with a nano-liter volume are dispensed on all elements of the EPS. Following pressing of the EPS, the EPS is illuminated with UV light to cure the resin; and then the EPS is separated from several thin patterned elements on a wafer. Experiments on UV-NIL were performed on an EVG620-NIL. 50 － 70 nm features of the EPS were successfully transferred to 4 in. wafers. Especially, the wafer deformation during imprint was analyzed using the finite element method (FEM) in order to study the effect of the wafer deformation on the UV-NIL using EPS.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.343-348
• /
• 2007

Molecular dynamics study of thermal NIL (Nano Imprint Lithography) process is performed to examine stamp-resist interactions. A layered structure consists of Ni stamp, poly-(methylmethacrylate) thin film resist and Si substrate was constructed for isothermal ensemble simulations. Imposing confined periodicity to the layered unit-cell, sequential movement of stamp followed by NVT simulation was implemented in accordance with the real NIL process. Both vdW and electrostatic potentials were considered in all non-bond interactions and resultant interaction energy between stamp and PMMA resist was monitored during stamping and releasing procedures. As a result, the stamp-resist interaction energy shows repulsive and adhesive characteristics in indentation and release respectively and irregular atomic concentration near the patterned layer were observed. Also, the spring back and rearrangement of PMMA molecules were analyzed in releasing process.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.532-537
• /
• 2007

Nano imprint lithography(NIL) is a cost-efficient, high-throughput processing technique to transfer nano-scale patterns onto thin polymer films. Polymers used as the resist include UV cured resins as well as thermoplastics such as polymethyl-methacrylate(PMMA). In this study, an analytic investigation was performed for the NIL process of transferring nano scale patterns onto polymeric films. Process optimization calls for a thorough understanding of resist flow during the process. We carried out 2D and 3D numerical analyses of resist flow during NIL process. The simulation incorporated continuum-hypothesis and the effects of surface tension were taken into account. For a more effective prediction of free surface, fixed grid scheme with the volume of fluid (VOF) method were used. The simulation results were verified with experimental results qualitatively. And the parametric study was performed for various process conditions.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.86-90
• /
• 2006

Nanoimprint lithography (NIL) is a novel method to fabricate nanometer scale patterns. It is a simple process with low cost, high throughput and high resolution. NIL process creates patterns by the mechanical deformation of imprint resist and physical contact process. This physical contact process causes the stiction between the resist and the stamp. Stiction becomes a key issue especially in the stamps including narrow pattern size and wide area during NIL process development. The antistiction layer coating using fluorocarbon is very effective to prevent this problem and ensure successful NIL. In this paper, the concept of antistiction coating is explained and different preparation methods for nanoimprinting are briefly discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.527-528
• /
• 2006

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.24.2-24.2
• /
• 2010

고분자 몰드를 이용한 nanoimprint lithography (NIL)는 고분자소재의 유연성과 투명성으로 인하여, 유기전자소자나 유연한 디스플레이소자 등 다양한 응용이 가능하다. 하지만, 고분자소재는 일반적으로 열저항성과 내구성이 낮아서, 고분자 몰드를 이용한 패턴형성 시, 자외선 경화방식이 주로 사용된다. 만약 복제가 쉽고, 가격이 저렴하며, 열저항성과 내구성이 강한 고분자 몰드를 제작한다면, thermoplastic-NIL 기술에 적용할 수가 있기 때문에, 고온을 요구하는 소자의 패턴형성 공정에 사용 가능하다. 본 연구에서는 이러한 고분자 몰드 제작을 위하여, 열저항성과 내구성이 강한 polyimide 필름과 polyurethane acrylate (PUA)를 기반으로 제작된 resin을 이용하였다. 먼저 Polyimide 필름 위에 자외선 노광을 사용하여, PUA resin 을 경화시킴으로써 패턴을 형성하였다. 이렇게 만들어진 몰드를 thermoplastic-NIL기술에 적용함으로써, Si 기판 위에 sub-마이크로 급 패턴을 형성하였다. 또한, 제작된 고분자 몰드를 사용하여 반복적인 NIL 공정을 수행함으로써 몰드의 내구성을 확인하였으며, 곡면 기판 위에 NIL을 함으로써 몰드의 유연성을 확인 할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.83-89
• /
• 2012

Due to the potential importance and usefulness, usage of highly ordered nanoporous anodized aluminum oxide can be broadened in industry, when highly ordered anodized aluminum oxide can be placed on a substrate with controlled thickness. Here we report a facile route to highly ordered nanoporous alumina with the thickness of hundreds-of-nanometer on a silicon wafer substrate. Hexagonally or tetragonally ordered nanoporous alumina could be prepared by way of thermal imprinting, dry etching, and anodization. Adoption of reusable polymer soft molds enabled the control of the thickness of the highly ordered porous alumina. It also increased reproducibility of imprinting process and reduced the expense for mold production and pattern generation. As nanoporous alumina templates are mechanically and thermally stable, we expect that the simple and costeffective fabrication through our method would be highly applicable in electronics industry.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.499-500
• /
• 2010

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.43.2-43.2
• /
• 2007

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1622-1624
• /
• 2006

We introduce a modified UV-imprint lithography, a resin transfer from the template to the substrate. We analyzed this method by considering the surface and interfacial free energies of the template-resinsubstrate system. This technique is purely fast and applicable to large area patterning.