• The Journal of the Convergence on Culture Technology
• /
• v.1 no.1
• /
• pp.79-85
• /
• 2015

According to the growing use of the personal GPS in the mobile device recently, the LBS (Local bases service), which processes and refines the GPS information, such as a position-tracking service, a public safety service, a local based information service, has increased steadily. Due to the refraction or reflection of GPS, however, it is impossible to use GPS around or in buildings. Therefore, it is necessary to correct the errors of GPS. We propose the method which corrects the errors of GPS and creates the refined trajectory using intersection region indexing. After analyzing the trajectory, receiving trajectories from many people and identifying the similarity between of trajectories, we will recommend the favorite route and useful information such as restaurant, convenience store, bus station and emergency call service.

• Journal of KIISE:Software and Applications
• /
• v.29 no.11
• /
• pp.767-774
• /
• 2002

Conventional research on image restoration has focused on restoring degraded images resulting from image formation, storage and communication, mainly in the signal processing field. Related research on recovering original image information of caption regions includes a method using BMA(block matching algorithm). The method has problem with frequent incorrect matching and propagating the errors by incorrect matching. Moreover, it is impossible to recover the frames between two scene changes when scene changes occur more than twice. In this paper, we propose a method for recovering original images using EBMA(Extended Block Matching Algorithm) and a region compensation method. To use it in original image recovery, the method extracts a priori knowledge such as information about scene changes, camera motion and caption regions. The method decides the direction of recovery using the extracted caption information(the start and end frames of a caption) and scene change information. According to the direction of recovery, the recovery is performed in units of character components using EBMA and the region compensation method. Experimental results show that EBMA results in good recovery regardless of the speed of moving object and complexity of background in video. The region compensation method recovered original images successfully, when there is no information about the original image to refer to.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.423-430
• /
• 2013

Recently, the personal identification technologies using vein pattern of back of the hand, palm, and finger have been developed actively because it has the advantage that the vein blood vessel in the body is impossible to damage, make a replication and forge. However, it is difficult to extract clearly the vein region from captured vein images through common image prcessing based region segmentation method, because of the light scattering and non-uniform internal tissue by skin layer and inside layer skeleton, etc. Especially, it takes a long time for processing time and makes a discontinuity of blood vessel just in a image because it has non-uniform illumination due to use a locally different adaptive threshold for the binarization of acquired finger-vein image. To solve this problem, we propose illumination normalization based fast method for extracting the finger-vein region. The proposed method has advantages compared to the previous methods as follows. Firstly, for remove a non-uniform illumination of the captured vein image, we obtain a illumination component of the captured vein image by using a low-pass filter. Secondly, by extracting the finger-vein path using one time binarization of a single threshold selection, we were able to reduce the processing time. Through experimental results, we confirmed that the accuracy of extracting the finger-vein region was increased and the processing time was shortened than prior methods.

• Journal of the Korean Geographical Society
• /
• v.31 no.3
• /
• pp.489-507
• /
• 1996

The purpose of this study is to examine the increasing number of unregistered manufacturing plants and related problems, and to recommend alternative solutions to the problems. Data are obtained from a field survey of randomly selected small scale manufacturing plants in Seoul and its suburban cities. A total number or respondents are 533, and 416 of them are unregistered plants. The Capital Regional Planning has had a goal during last three decades to lead a balanced regional economic development by restriction manufacturing plants in the Capital Region and by encouraging them in other regions in the nation. It was 1984 when a comprehensive planning was established to achieve this goal. Sets of various regulations, by-laws and codes have been implemented to regulate manu-facturing activities in the Capital Region to achieve the goal. The region is divided into three sub-regions, and a different degree of regulations is applied to each sub-region. Only a certain types of industries are allowed in a particular sub-region. For instance, a plant manufacturing high-technology products could be allowed in the most urbanized sub-region. All manu-facturing plant in the Capital Region which has ares size of larger than 200"\;"$m^2$ is compulsory to register to the local government office. In practice, however, it is not common or sometimes almost impossible to get approval for many applicant manufacturers because of strict regulations. There have been increasing number of plants in the Capital Region during last several decades, despite the strict regulations. Many of those newly established plants are without formal registration at the local administration office. howerver. These are so called 'unregisterd' plants. Surveyed data and many government official data show that many of unregistered plants have been established in recent years. which indicate that current regulations are no longer effective. The number of unregistered plants are increasing tin the Capital Region because of many locational advantages in the region for plants, particularly those in small scale. Unregistered plants are the source of many problems, such as local water pollution or noise pollution in residential areas. There are also many administration problems, bed\cause they are not registered. The central government has attempted to cure the problems of unregistered plants. For example, the government allowed a unregistered plant to remain at present site for three ydars, if it met certain conditions in three years. However, this program was unsuccessful because many of those plants were not able to meet the concitions. Three times the government renewed the term for those which did not meet conditions since 1989, but it was afraid to be without success. There are many evidences that current policies to control manufacturing plants are not effective. The Capital Region must face mounting problems if ploicies are not reformed soon. This study suggests that the policy of the Capital Regional Planning has to be reoriented to provide more favorable policies for manufacturing plants in the Capital Region than current regulations which is aimed to restrict manufacturing activities. It is time to improve many existing problems in the region through reforms and of current regulations to foster unregistered plants. This study also proposes many smaller-area sub-divisions instead of current three large area sub-regions which is too broad to apply single kind of regulation, or codes. Flexible regulations and codes can be applied to such a small-area sub-divivisions based on location and industrial characteristics of the individual sub-divisions. It is necessary to provide decent industrial environment in the Capital Region, which is best equipped to provide many favorable industrial locational factors in the nation, thus this nation can be further prepared to compete in an inter-national market at an era of globalization in manufacturing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5A
• /
• pp.407-416
• /
• 2005

This paper suggests a new geocasting protocol which is used to transfer the geographic packets to the specific region in MANET. Geocasting protocol is basically different from the conventional multicasting protocol that needs group addition and maintenance. A geocasting protocol using the mobile node's position information is the new area of multicasting protocols. The existing geocasting protocols have the following problems; it may be impossible to transfer data to some mobile hosts even if there are alternate routes and they have low adaptability and efficiency when the number of mobile hosts increases. The proposed CBG (Cluster-Based Geocasting) uses the proactive routing strategy and clustering technique with mobile host's location information. The CBG achieves high successful data transmission ratio and low data delivery cost to mobile hosts at specific region.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.244.1-244.1
• /
• 2015

The Ag Nanowire is one of the materials that are widely studied as alternatives to ITO and is available for large area, low cost process and the flexible transparent electrode. However, Ag nanowire can have the problem of a lack of stability at high temperatures, making this impossible to form a film. Using a structure of ITO/AgNW/ITO in photodetector device, we improved the properties of the ITO in the IR region and improved the thermal stability of the AgNW. The structure of ITO/AgNW/ITO has a high transmittance value of 89% at a wavelength of 900 nm and provide a good electrical property. The AgNWs embedded ITO film has a high transmittance, this is because of the light scattering from the AgNW. The thermal stability of the developed ITO/AgNWs/ITO films were investigated and found AgNWs embedded ITO films posses considerable high stability compared to the solo AgNWs on the Si surface. The ITO/AgNWs/ITO device showed a improved photo-response ratio compared to those of the conventional TC device in IR region. This is attributed to the high transmittance and low sheet resistance. We suggest an effective design scheme for IR-sensitive photodetection by using an AgNW embedded ITO.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.137-153
• /
• 2016

The price of agricultural products has changed from year to year, the m ajor c ause o f price fluctuation is the imbalance of supply and demand. Materials which are mainly used in korean cabbage production volume is the forecast model, using the cadastral result, slope calculation is impossible to achieved. For this reason, this implies the drastic decrease of prices and the prediction of supply and demand of field crops that is cultivated in a highland slope area, this situation is being repeated. Therefore, the target area of this research is the slopes of high land, by using 2D and 3D Lidar data for the analysis of the cultivated area. Experiment was carried out in the same area to compare the data differences. The rate of change in the area of slope is quantitatively increasing presented by the regression model. An alternative methodology that can improve the reliability of the calculated slope area using 2D is through cadastral map.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.83-88
• /
• 2010

This study is going to suggest the technology to recognize a starfish by judging various starfish images. In case of recognition of single objects of the asterias amurensis, a starfish can be judged by using concave features and short line features but in case of multiple objects, it is impossible to extract the features of a starfish using concave features or short line so that it can't be recognized as a starfish. Accordingly, it is going to suggest the recognition technology using the features such as numbers of standard deviation, relative degree standard deviation and valid deviation of a long line by using the region central moment and a long line of multiple objects. As a result of experiments of the suggested technology, there were cases that recognition failed because the conditions of the standard deviation of a long line or the numbers of valid deviation of the relative degree couldn't satisfy the conditions but around 95% of a high recognition rate was shown.

• Convergence Security Journal
• /
• v.19 no.5
• /
• pp.19-24
• /
• 2019

It is impossible to apply the routing protocol in the wired environment because MANET consists of only mobile nodes. Therefore, routing protocols considered these characteristics are required. In particular, if malicious nodes are not excluded in the routing phase, network performance will be greatly reduced. In this paper, we propose intrusion detection technique based on region to improve routing performance. In the proposed technique, the whole network is divided into certain areas, and then attack detection within the area using area management node is performed. It is a proposed method that can detect attack nodes in the path through cooperation with each other by using completion message received from member nodes. It also applied a method that all nodes participating in the network can share the attack node information by storing the detected attack node and sharing. The performance evaluation of the proposed technique was compared with the existing security routing techniques through the experiments and the superior performance of the proposed technique was confirmed.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.462-467
• /
• 2007

From the research which it sees verification of the whole interpretation and local interpretation of the durability steel deck bridge a static test and it produces the test body which it sells with character and it executes smallness pul lek detailed interpretation it leads and the appropriate characteristic of smallness pul lek detailed interpretation and to sleep a nominal stress price and it compares it judges it does. The stress quality from each structure region which it follows in load stock location it analyzes and from the hazard which evaluates, the objective region the length rib and the bottom grater weld zone, the length rib and width rib connection department and the width rib with the father it divided. It investigated the stress distribution of the test body from these objective location, FEM interpretation it led and the conduct against each structure state tax it analyzed. General conduct the load stock location the floor plate is located in the center with interpretation price together symmetry characteristic to seem, it cannot be like that it cannot there is one actual test price. Like this reason the length rib and width rib connection actually production even production characteristic security it is a day when it is impossible with the curvature junction department which it blows, it follows in examination body deferment condition and form feed with the fact that it is visible a big difference even with error of some it becomes. Consequently for a data and the research which are more accurate it is judged with the fact that the effort which is prudent will be necessary.