• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.85-88
• /
• 2000

In order to resolve problems according to the phase error in QPSK demodulator of the digital communication systems. The demodulator requires carrier recovery loop which searches for the frequency and phase of the carrier. In this paper the complexity of implementation is reduced by the reduction into half of the number of the multiplier in filter structure of the conventional carrier recovery loop, and as the drawback of NCO of the conventional carrier recovery loop wastes a amount of power for the structure of lookup table , We designed the structure of combinational logic without the lookup table. In the comparison with dynamic power of the proposed NCO, the power of NCO with the lookup table is 175㎼, NCO with the proposed structure is 24.65㎼. As the result, it is recognized that about one eight of loss power is reduced. In the simulation of carrier recovery loop designed QPSK demodulator, it is known that the carrier phase is compensated.

• Journal of Communications and Networks
• /
• v.3 no.4
• /
• pp.374-382
• /
• 2001

Nowadays, the commonly used table lookup scheme for IP routing is based on the sc-called classless interdomain routing (CIDR). With CIDR, routers must find out the best matching prefix (BMP) for IP packets forwarding, this complicates the IP lookup. Currently, this process is mainly performed in software and several schemes hale been proposed for hardware implementation. Since the IP lookup performance is a major design issue for the new generation routers, in this article we investigate the properties of the routing table and present a new approach for IP lookups, our approach is not based Gn BMP and significantly reduces the complexity, thus the computation cast of existing schemes can be significantly reduced. We also propose an efficient IP lookup algorithm, with which we improve the binary search on prefixes to 30 millions of packets per second (MPPS) and 5,000 route updates/s under the same experiment setup with an even larger routing table.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.5
• /
• pp.82-92
• /
• 1997

In this paper, we propose post-rpocessing method that corrects a misrecognized character by generated a characater recognizer using morphological analyzer and spelling corrector. The proposed post-processing consists of sthree phases : First, our method pass through morhological analyzer which only outputted necessary information for spelling correcting, doesn't analyze a bundle of phrases, and detects the location of misrecognized character. Second, tagging the generated candidate character using the information of character substitution table and grapheme substitution/separating table. Then we retry analysis after the misrecognition character has been substituted. Finally we select table, we investigate misrecognized charcters in CORPUS. Reliability analysis used to frequency of randomly selected about 100,000 words in CORPUS. A korean character recognizer demonstrates 93% correction rate without a post-processing. The entire recognition rate of our system with a post-processing exceeds 97% correction rate.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.383-387
• /
• 2012

Development of automated document management system specified for scanned invoice images suffers from rigorous accuracy requirements for extraction of monetary data, which necessiate automatic validation on the extracted values for a generative invoice table model. Use of certain internal constraints such as "amount = unit price times quantity" is typical implementation. In this paper, we propose a noble invoice information extraction model with improved auto-validation method by utilizing table header detection and column classification.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.165-168
• /
• 2001

In this W the complexity of implementation is reduced by the reduction into half of the number of the multiplier in filter structure of the conventional carrier recovery loop, and as the drawback of NCO of the conventional carrier recovery loop wastes a amount of power for the structure of lookup table, We designed the structure of combinational logic without the lookup table. In the comparison with dynamic power of the proposed NCO, the power of NCO with the lookup table is 175${\mu}$W, NCO with the proposed of structure is 24,65${\mu}$W. As if result, it is recognized that about one eight of loss power is reduced In the simulation of carrier recovery loop designed QPSK demodulator, it is known that the carrier phase is compensated.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.6
• /
• pp.247-251
• /
• 2021

We propose a protocol for Ethernet-based industrial real-time communication networks. In the protocol, the master periodically transmits control frames to all slaves, and the ring-type network topology is selected to achieve high-speed transmission speed. The proposed protocol is implemented in the form of both firmware and Linux kernel modules. To improve the transmission speed, the MAC address table is disabled in the firmware implementation, and the NAPI function of the Ethernet driver is removed in the Linux kernel module implementation. A network experiment environment is built with four ARM processor-based embedded systems and network operation experiments are performed for various frame sizes. From the experimental results, it is verified that the proposed protocol normally operates, and the firmware implementation shows better transmission speed than the Linux kernel module implementation.

• Korean Management Science Review
• /
• v.12 no.1
• /
• pp.139-156
• /
• 1995

This study addresses basic requirements for mathematical programming software, discusses considerations in designing these software, implementation issues facing in these types of applications development, and shows some examples of codes being developed in the course. This type of projects requires long and ever-changing evolutionary phases. The experience is therefore, valuaable in suggesting some useful hints which may be salvaged for similar projects as well as providing reusable codes. In particular, scanning and parsing the free-format inputs, symbol table management, mixed-language programming, and data structures dealing with large sparse matrices are indispensable to many management science software development. Extensions to be made are also discussed.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.35-38
• /
• 1998

In this paper, we present a new SVPWM strategy for a 3-level inverter. This SVPWM method is easily implemented without switching table like SVPWM. In addition, with proposed method, we can also keep the voltage balancing of DC-link capacitors and guarantee minimum on/off time of the devices. The principle of the proposed SVPWM method is described in detail, and its implementation method is also proposed. The usefulness of the proposed SVPWM method is verified through the simulation using MATLAB/Simulink.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.8
• /
• pp.669-672
• /
• 2004

This paper considers the implementation and experiments of an open-loop Cylindrical Vibratory Gyroscope(CGV). An open-loop CGV composed of thin cylindrical vibrating element, electromagnetic drive and pick-off element with open-loop control was designed and fabricated. The experimental performance tests of the open-loop CGV were done using a temperature chambered rate table. Also, the limitations of open-loop CGV were analyzed and the solution for the limitations was proposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.125-132
• /
• 2002

This paper shows an experimental magnetic levitation table using one degree-of-freedom active control. The magnetic levitation table using repulsions of permanent magnets was theoretically presented already. Thus the objective of this paper is to prove stable levitation with only one degree-of-freedom active control experimentally. For the design of the system, at first, permanent magnets are selected. Secondly, the spring constants of the virtual spring are obtained by simulation. Thirdly, the moving magnets are arranged using a stable layout relation. Fourthly, a linear voice coil motor is designed. Finally, the magnetic levitation system is manufactured. The phenomenon of stable levitation in the manufactured table is proven by means of dynamic time and frequency responses. The differences between the theoretical natural frequencies and experimental ones are analyzed. Also, stable range in the control direction is shown experimentally.