• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.772-773
• /
• 2015

This paper presents a dynamic model of 2-D magnetostriction in electrical steel sheet (ESS) under rotating flux magnetization conditions and its implementation in finite element method (FEM). For an arbitrary waveform of magnetic flux density (B), the corresponding magnetostriction waveform can be predicted by the model. In order to apply the model to FEM easily, the model is based on trilinear interpolation method. As an example, the model is applied to a three-phase transformer constructed by highly grain-oriented electrical steel sheets and the numerical results by the magnetostriction model are discussed.

• Journal of the Korean Society of Safety
• /
• v.31 no.6
• /
• pp.19-24
• /
• 2016

One of key parameters on lightning protection system design of electric, information and communication system is grounding impedance. Earth impedance includes numerous information about earthing performance of grounding system. This paper suggests grounding impedance measuring device which is comprised of wideband current source, voltage and current measuring components. We used IQ Demodulation to measure more accurate phase difference of voltage and current. The range of frequency is up to 1 MHz that is IEEE defined as the range of lightning surge. We compared developed grounding impedance measuring device with existing one to test its performance, and we used grounding system while we implemented measurement and analysing by using fall of potential method IEEE Std.81 proposed.

• Journal of the military operations research society of Korea
• /
• v.22 no.2
• /
• pp.90-112
• /
• 1996

Research issues in software engineering in recent may be object oriented methodology and software quality. Since Halstead has proposed metric-software science in 1977, software quality area has been studied in steady but inactively until 1980s. As international standards such as ISO 9000-3, 9126 were enacted in 1990s early, interest in software quality is increased but many problems such as how to validate metric, measure quality or apply metric are remained. This paper proposes software quality metric methodology which software developer or project manager can use in measuring quality and validating metric during software development. The methodology is classified by several phases: establishment of quality requirement, identification of quality metric, data collection, metric implementation, metric validation. In order to show its applicability, test program, metrics and data are applied to each phase of the methodology. Consideration of this methodology as a methodology for software quality measurement similar to development methodology for software development is needed.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.326-329
• /
• 2002

In this paper, a single-phase inverter using a diode bridge-type resonant circuit to implement ZVT(Zero Voltage Transition) switching is presented. The current control algorithm is analyzed about how to design the circuit with auxiliary switch which can ZVT operation for the main power switch. The simulation and experimental results would be shown to verify the proposed current algorithm, because the main power switch is turn on with ZVT and the hi-directional inverter is operated.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.785-788
• /
• 2003

In this paper , the simple MPPT(Maximum Power Point Tracking) control algorithm is proposed for the grid-connected photovoltaic power system. This method uses the difference in the slope of the solar array voltage range below the MPP and above the MPP. This simple the algorithm enables the hardware implementation achieved by only analog devices. The proposed MPPT algorithm is verified by the hardware experiment using 500[W] solar away simulator, simplified inverter model hardware set, and rectified grid-line.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.6-10
• /
• 2003

The reliability of power electronics system is very important In industrial, commercial and military applications. This paper presents the principles for NPC inverter as an available technology for the design and implementation of adaptive fault tolerant systems. The fault tolerance is obtained by the use of the particular construction. The control method is proposed to get the sinusoidal load current with constant amplitude. The strategy described in this paper is expected to provide an economic alternative to more expensive redundancy techniques which find justification only in a few specialized application.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.3
• /
• pp.493-496
• /
• 2010

At present, Metal Oxide gas Sensors (MOXs) are widely used in gas detection because of its advantages, including high sensitivity and low cost. However, MOX presents well-known problems, including lack of selectivity and environment effect, which has motivated studies on different measurement strategies and signal-processing algorithms. In this paper, we present an artificial neural network (ANN) that models an MOX sensor (TGS822) used in a dynamic environment. This model takes into account dependence in relative humidity and in gas nature. Using MATLAB interface in the design phase and optimization, the proposed model is implemented as a component in an electronic simulator library and accurately expressed the nonlinear character of the response and that its dependence on temperature and relative humidity were higher than gas nature.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.551-560
• /
• 2011

This paper proposes a grid-tied power conditioning system for the fuel cell power generation, which consists of a 2-stage DC-DC converter and a 3-phase PWM inverter. The 2-stage DC-DC converter boosts the fuel cell stack voltage of 26-48V up to 400V, using a hard-switching boost converter and a high-frequency unregulated LLC resonant converter. The operation of the proposed power conditioning system was verified through simulations with PSCAD/EMTDC software. Based on the simulation results, a laboratory experimental set-up was built with a 1.2kW PEM fuel-cell stack to verify the feasibility of hardware implementation. The developed power conditioning system shows a high efficiency of 91%, which is a very positive result for the commercialization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.6
• /
• pp.499-503
• /
• 2004

In the actual system development site, the various specifications are drawn up into each phase, namely analysis, design, development and implementation, beginning with the analysis of user requirements and data involved. The part of the specifications are continuously drawn up by using automated tool, but all specification are not automatically drawn up. Therefore, many inconsistent items occur between the specifications. In this paper, we propose the method which detects the error which is included in the specifications, and we are going to design and implement a specification error detection system based on this.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.3
• /
• pp.199-204
• /
• 2007

This paper presents design of interleave configured dc-dc converter for high power distributed power system applications. The multi channel interleaving buck converter with small inductance has proved to be suitable for micro-grid, requiring medium output voltages, high output currents and fast transient response. Integrated magnetic components are used to reduce the size of the converter and improve efficiency. Unlike conventional methods, the distributed approach requires no centralized control, automatically accommodates varying numbers of converter cells, and is highly tolerant of subsystem failures. A general methodology for achieving distributed interleaving is proposed, along with a specific implementation approach. The design and simulation verification of switching frequency 10 kHz system is presented with interleaved clocking of the converter cells. The simulation (simulated by PSIM 6.1) results corroborate the analytical predictions and demonstrate the tremendous benefits of the distributed interleaving approach.