• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.265-267
• /
• 2001

In this paper, some optical parameters which have effects on the measuring precision and sensitivity of optical current sensor are analyzed. Each parameter occurs changes of specific characteristics of optical sensor system. The influences of performance and characteristics variation of optical current sensor are described in accordance with the changes of optical output power, optical bias point which is called phase difference, and a specific constant related to sensor material and wavelength of light source.

• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.644-651
• /
• 2015

This paper introduces a novel digital one cycle control (DOCC) boost power factor correction (PFC) converter. The proposed PFC converter realizes the FPGA-based DOCC control approach for single-phase PFC rectifiers without input voltage sensing or a complicated two-loop compensation design. It can also achieve a high power factor and the operation of low harmonic input current ingredients over universal loads in continuous conduction mode. The trailing triangle modulation adopted in this approach makes the acquisition of the average input current an easy process. The controller implementation is based on a boost topology power circuit with low speed, low-resolution A/D converters, and economical FPGA development board. Experimental results demonstrate that the proposed PFC rectifier can obtain a PF value of up to 0.999 and a minimum THD of at least 1.9% using a 120W prototype.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.136-144
• /
• 2012

In this paper, the different techniques for the field weakening, also known as constant power speed range (CPSR) operation, for permanent magnet synchronous motor (PMSM) will be introduced and analysed. Field weakening of PMSM, can be done using either vector control (VC) or conventional phase in advance (CPA). Implementation of these techniques depending on some features and constrains. Most of these features and constrains came from the motor parameters. One of these constrains is the motor inductance which determining whether the motor can be driven in the CPSR or not. A new approach for the field weakening will be discussed and to be verified to overcome this constrain. The new approach will be verified through both techniques VC and CPA.

• Proceedings of the ESK Conference
• /
• 1998.04a
• /
• pp.13.1-18
• /
• 1998

IVNS(In-Vehicle Navigation System) which developed by the advance of technological system including computer, display and communication will procide the important interface functions between the driver and the ITS (Intelligent Transport System). However, hat the human factors engineer can actually offer to the designer is by no means a complete set of design specifications. Therefore, a set of boundary conditions and operational ranges within which the designer can be assured that physical, perceptual and cognitive abilities and limitations of drivers will be accommodated system atically[6]. Also, this will be the considerations to compose the IVNS HMI (Human-Machine Interface) design guidelines and IVNS HMI evaluation system. As the first phase of developing the IVNS HMI evaluation system, this paper describe the architecture and the content of this system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1871-1875
• /
• 1997

Crane operation is manually accomplished by skilled operators. Recently, the concept of automation is widely introduced in shipping and unloading operation using the overhead crane for the enhanced productivity. In this regards, we designed an angle detector and 3D position detectro which are key evices for this operation. As well as an intellignet control algorithm is developed for the implementation of swing free crane. The performance of the presented algorithm is tested for the swing angle and the position of the overheas crand. The control scheme adopts a feedback control of an angular velocity of swing in initial phase and then the fuzzy controller whose rule base is optimized by a genetic algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.574-578
• /
• 2004

In this paper, a nonlinear feedback system is analyzed for a surface micromachined resonant accelerometer. For this, a brief illustration of the plant dynamics is given. In the analysis, the periodic signal in the nonlinear feedback loop is obtained by the limit cycle point, which is best approximated via the describing function method. Considering the characteristic feature of plant dynamics, a simple phase shifted relay with finite slope is designed for the nonlinearity implementation. With a describing function for random plus sinusoidal input, we analyzed the effect of a white Gaussian noise on oscillation frequency. Finally, simulation and experimental result is given.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.2
• /
• pp.117-126
• /
• 2012

This paper provides a method for compression transmission of on-chip bus data. As the data traffic on on-chip buses is rapidly increasing with enlarged video resolutions, many video processor chips suffer from a lack of bus bandwidth and their IP cores have to wait for a longer time to get a bus grant. In multimedia data such as images and video, the adjacent data signals very often have little or no difference between them. Taking advantage of this point, this paper develops a simple bus data compression method to improve the chip performance and presents its hardware implementation. The method is applied to a Video Codec - 1 (VC-1) decoder chip and reduces the processing time of one macro-block by 13.6% and 10.3% for SD and HD videos, respectively

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.2
• /
• pp.53-60
• /
• 1990

MSK waveforms are advantageous from the point of view of reduced interchannel interference. MSK waveform, however, is more difficult to generate than PSK due to its complex pulse shape. A SAW filter is ideally suited for generation of MSK waveform because it provides accurate control of the required impulse responese and linear phase at high frequncies. In this paper, an implementation of SAW based PSK-MSK convert filter, which can easily convert the high frequency PSK waveform to MSK, is studied.

• Knowledge Management Research
• /
• v.7 no.2
• /
• pp.53-68
• /
• 2006

Knowledge has become an important resource for organization. The manufacturing industry is usually operated on the basis of business processes, and most workers are familiar with their own processes. The process-based approach, therefore, can provide an efficient way to capture and navigate knowledge. In this study, we focus on knowledge which may be missed during knowledge transfer among workers. For this, we propose a method for analyzing knowledge flow, which is passed among business processes. We propose a process-based knowledge management framework for analyzing knowledge flow, which employs a two-phase analysis: process analysis and knowledge flow analysis. A knowledge flow model, represented by Knowledge Flow Diagram, is proposed as a tool for representing knowledge. We formulate several semantics for knowledge flow modeling. We build the three-level schema: conceptual, logical, and physical in order to automate the knowledge model adaptive to knowledge management systems. The proposed approach is verified and illustrated through a case study on the manufacturing process of A Company.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.1
• /
• pp.67-74
• /
• 2017

This study proposes a novel random pulse-width modulation (PWM) technique with a constant switching frequency utilizing a random offset voltage. The proposed PWM technique spreads switching harmonics by varying the position of an active voltage vector without a switching frequency variation. The implementation of the proposed PWM technique is simple because it does not require additional hardware and complex algorithm. The proposed random PWM technique is compared with the conventional PWM technique on the factors of harmonic spectrum, total harmonic distortion, and harmonic spread factor to confirm the harmonic spread effect. The validity of the proposed method is verified by simulations and experiments on a three-phase inverter drive system.