• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1713-1719
• /
• 2022

As the noise canceler with a small processing delay increases the sampling frequency, a better-quality output can be obtained. For a single buffer, processing delay occurs because it is impossible to write new data while the processor is processing the data. When synthesizing with anti-noise and output signal, this processing delay creates additional buffering overhead to match the phase. In this paper, we propose an accelerator structure that minimizes processing delay and increases processing speed by alternately performing read and write operations using the Symmetric Even-Odd-buffer. In addition, we compare the structural differences between the two methods of noise cancellation (Fast Fourier Transform noise cancellation and adaptive Least Mean Square algorithm). As a result, using an Symmetric Even-Odd-buffer the processing delay was reduced by 29.2% compared to a single buffer. The proposed Symmetric Even-Odd-buffer structure has the advantage that it can be applied to various canceling algorithms.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.67-72
• /
• 2008

Heavy equipment is a very important factor for successful construction implementation. Also, the cost for heavy equipment is a major part of construction cost. Therefore, the estimation of equipment cost is a critical job in the construction planning phase. A formula for production rates shown in 'Standard Unit Labor' has been used to estimate construction equipment capability per hour and cost. Although the performance of equipment has been improved, the efficiency rates in the formula are not updated lately. Therefore, this research performed several site visits to measure construction equipment working time and then calculates the efficiency rates for hydraulic backhoe, loader, and dump truck. The results show that the measured efficiencies of backhoe and loader are higher than current ones and vice versa for dump truck. This research proposes the needs for a standardized calculation formula and systematic and long-term data collection and measurement for updating efficiency rates for heavy equipment.

• Pediatric Infection and Vaccine
• /
• v.30 no.1
• /
• pp.1-11
• /
• 2023

Respiratory syncytial virus (RSV) is a pathogen with a high burden of disease and social cost among infants worldwide, but the development of a vaccine has been delayed. The recent understanding of the pathogenesis of RSV, progress in reverse genetics, and successful implementation of other maternal immunizations have prompted the recent rapid development of monoclonal antibodies (mAbs) and vaccines for RSV prevention. Phase 3 clinical trials for two next-generation mAbs (nirsevimab and clesrovimab) and two maternal RSV pre-F vaccines are currently underway or have been recently completed. Soon, we might be able to protect young infants through long-acting mAbs and/or maternal immunization. Additionally, the development of live-attenuated vaccine candidates that are capable of avoiding enhanced RSV disease is ongoing. We need to gain familiarity with these newly developed strategies and collect epidemiological data on domestic RSV to adequately prepare for a new era of RSV prevention.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.201-206
• /
• 2020

Diversification of project delivery methods (PDM) under ever-changing construction business environment has significantly changed the role of project participants. Active efforts to effectively sharing the roles and responsibilities have been observed in the project management offices (PMOs) among owner/operator organizations as well as engineering, procurement, construction and maintenance (EPCM) firms. In order for being effective in a holistic way throughout the project life-cycle, a PMO needs to have 'adequate management skills' as well as 'essential technical capabilities' in cooperating with many different participants. One of the well-known examples of the PMO's tool to support these skills and capabilities is the effective 'work packaging (WP)' that serves as a common basis integrating all relevant information in a structured manner. In an attempt to enhance the construction productivity, the concept of 'advanced work packing (AWP)' has been introduced by Construction Industry Institute (CII). The AWP enables productivity to be improved by early planning of construction packages in the design phase "with the end in mind". The purpose of this study is to identify and evaluate the 'variables' of advanced work packing (AWP) for life-cycle information integration. Firstly, an extended concept of advanced WP based on the CII AWP was defined in order to comprehend many different issues of business functions (e.g. cost, schedule, quality, etc.). A structured list of major components and variables of AWP were then identified and examined for practical viability with real-world examples. Strategic fits and managerial effectiveness were stressed throughout the analyses. Findings, implications and lessons learned are briefly discussed as well.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.252-259
• /
• 2013

Building Information Modeling (BIM) is utilizing CAD technology in a way that ultimately ties all the components of a building together as objects imbedded with information, and has been changing the way we design and build over the last 20-30 years. In Polytechnic Institute of NYU, there are four BIM courses offered which provide students with different levels of knowledge regarding BIM Technique, BIM Standards, BIM Guideline and Roadmap for Private and Public Implementation, BIM Application in Real Projects, the Cooperation of BIM and IPD for Public Works in New York City. With advanced BIM technology, BIM's integration into the construction process and its incorporation into project delivery systems, especially Integrated Project Delivery (IPD) are the bridges between technology, industry and research. This paper presents an integrated BIM curriculum with three modules: 1) BIM functions and Bid Preparation; 2) Time-Cost Trade-off Analysis; and 3) Problems Solving in BIM/IPD Environment. In this project-based curriculum developed by the common efforts of academia, public agency and industry, the objectives are: (1) to provide the information and skills needed to successfully implement BIM into the construction phase; (2) to identify BIM's role in construction and the project delivery system; (3) to develop a module in conjunction with leading BIM into project delivery system, particularly coordination between BIM and IPD; (4) to connect technology and research into industry. The course assessment was conducted and the results indicate that it is a successful reform in construction management education.

• Korean Medical Education Review
• /
• v.26 no.1
• /
• pp.27-35
• /
• 2024

Medical students' career choices hold significant importance at both individual and national levels. Therefore, Chungnam National University College of Medicine aimed to systematize its revised career fair in 2022, basing its efforts on a career planning process model. Chungnam National University College of Medicine sought to formalize the design process by utilizing the ADDIE model (analysis design, development, implementation, evaluation model) in developing programs for the career fair program. Throughout the entire process, the student support center and student council actively collaborated, striving to incorporate students' requests and opinions. They designed and developed a program for all stages of the career planning process. However, a new stage ("review & ref lection") was added to the existing 4-phase model, creating a transformed framework where this stage interacts with the original 4 phases. Each stage involved portfolios, career aptitude tests, career-related lectures, posters with introductory information about majors, and booths for each major. The revised career fair attracted double the expected participants (N=589). The program evaluation survey showed overall positive responses (N=135). Additionally, some factors in the Specialty Indecision Scale showed significant differences between before and after the career fair. The success of the newly developed career fair at Chungnam National University College of Medicine can be attributed to its systematic framework and the active involvement of students throughout the process. However, for aspects with long-term implications, such as "understand yourself " and "choose your specialty," there may be a need for supplementary programs.

• Tuberculosis and Respiratory Diseases
• /
• v.56 no.5
• /
• pp.485-494
• /
• 2004

Background : To assess the effects of mDOT implementation on sputum smear conversion for AFB (Acid fast bacilli) positive pulmonary tuberculosis patients, modified Directly Observed Treatment (mDOT) was started on October $8^{th}$ 2001 at a health center in Seoul. mDOT was defined through weekly interviewing and supervising of a patient by a supervisor (doctor, nurse, or lay health worker). The sputum smear conversion of a mDOT group was compared with that of a self-medication (self) group. Methods : This study included 52 AFB positive pulmonary tuberculosis patients registered at a health center in Seoul between October $8^{th}$ 2001 and April $23^{rd}$ 2002. 24 and 28 patients were enrolled in the mDOT and self medication groups, respectively. Paired (1:1) individual matching, by gender, extent of disease, relapse and age-matching variables, was performed between the two groups, resulting in 20 paired matches. This prospective study was planned as an unblinded, non-randomized quasiexperimental pilot project. Outcomes were identified from results of sputum smear examinations for AFB in both groups at 2 weeks, and 1 and 2 months. The paired matching data were analyzed using the SAS program version 8.1 by McNemar test. Results : At the end of 2 weeks of treatment, the sputum smear conversion of the mDOT group was somewhat higher than that of the self medication group (78.57 vs. 50%, p-value=0.289), and after 1 month of treatment no statistically significant difference was shown between the two groups (83.33 vs. 50, p-value=0.125). At the end of 2 months of treatment (initial intensive phase), the sputum smear conversions of the mDOT and self groups were 95 and 75%, respectively (p-value=0.219). Conclusions : The implementation of mDOT did not result in clinically significant increases in the sputum smear conversion at 2 weeks, and 1 and 2 months compared with that of the self medication group. However, the increases experienced might contribute to diminishing the infectious period of AFB positive patients, and this approach may act as a guide for a specific group of patients. In this study, mDOT was performed for one hundred percent of the intensive treatment phase. It can also be an effective treatment for pulmonary tuberculosis patients, and may be useful for some high risk tuberculosis patients.

• Archives of design research
• /
• v.16 no.4
• /
• pp.185-196
• /
• 2003

The demand for an environment-friendly transportation system, equipped with low energy consumption, and low-or zero-pollution has been on the increase since the beginning of the World Trade Organization era. Simultaneously, the consistent growth of high-speed tram technology, combined with market share, has sparked a fierce competition among technologically-advanced countries like France, Germany, and Japan in an effort to keep the lead in high-speed train technology via extensive Research and development(R＆D) expenses. These countries are leaders in the race to implement the next-generation transportation system, build intercontinental rail way networks and export the high-speed train as a major industry commodity. The need to develop our own(Korean) 'high-speed train' technology and its core system technology layouts including original technology serves a few objectives: They boost the national competitive edge; they develop an environmental friendly rail road system that can cope with globalization and minimize the social and economic losses created by the growing traffic-congested delivery costs, environment pollution, and public discomforts. In turn, the 'G7 Project-Development of High Speed Railway Technology' held between 1996 and 2002 for a six-year period was focused on designing a domestic train capable of traveling at a speed of 350km/h combined and led to the actual implementation of engineering and producing the '2000 high-speed train:' This paper summarizes and introduces one of the G7 Projects-specifically, the design segment achievement within the development of train system engineering technology. It is true that the design aspect of the Korean domestic railway system program as a whole was lacking when compared with the advanced railroad countries whose early phase of train design emphasized the design aspect. However, having allowed the active participation of expert designers in the early phase of train design in the current project has led to a new era of domestic train development and the implementation of a way to meet demand flexibly with newly designed trains. The idea of a high-speed train in Korea and its design concept is well-conceived: a faster, more pleasant, and silent based Korean high-speed train that facilitates a new travel culture. A Korean-type of high-speed train is acknowledged by passengers who travel in such trains. The Korean high-speed prototype train has been born, combining aerodynamic air-cushioned design, which is the embodiment of Korean original design of forehead of power car minimized aerodynamic resistance using a curved car body profile, and the improvement of the interior design with ergonomics and the accommodation of the vestibule area through the study of passenger behavior and social culture that is based on the general passenger car.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.2
• /
• pp.109-117
• /
• 2013

The Global Framework on Climate Services (GFCS) will guide the development of climate services that link science-based climate information and predictions with climate-risk management and adaptation to climate change. GFCS structure is made up of 5 pillars; Observations/Monitoring (OBS), Research/ Modeling/ Prediction (RES), Climate Services Information System (CSIS) and User Interface Platform (UIP) which are all supplemented with Capacity Development (CD). Corresponding to each GFCS pillar, the Commission for Agricultural Meteorology (CAgM) has been proposing "Global Initiatives in AgroMeteorology" (GIAM) in order to facilitate GFCS implementation scheme from the perspective of AgroMeteorology - Global AgroMeteorological Outlook System (GAMOS) for OBS, Global AgroMeteorological Pilot Projects (GAMPP) for RES, Global Federation of AgroMeteorological Society (GFAMS) for UIP/RES, WAMIS next phase for CSIS/UIP, and Global Centers of Research and Excellence in AgroMeteorology (GCREAM) for CD, through which next generation experts will be brought up as virtuous cycle for human resource procurements. The World AgroMeteorological Information Service (WAMIS) is a dedicated web server in which agrometeorological bulletins and advisories from members are placed. CAgM is about to extend its service into a Grid portal to share computer resources, information and human resources with user communities as a part of GFCS. To facilitate ICT resources sharing, a specialized or dedicated Data Center or Production Center (DCPC) of WMO Information System for WAMIS is under implementation by Korea Meteorological Administration. CAgM will provide land surface information to support LDAS (Land Data Assimilation System) of next generation Earth System as an information provider. The International Society for Agricultural Meteorology (INSAM) is an Internet market place for agrometeorologists. In an effort to strengthen INSAM as UIP for research community in AgroMeteorology, it was proposed by CAgM to establish Global Federation of AgroMeteorological Society (GFAMS). CAgM will try to encourage the next generation agrometeorological experts through Global Center of Excellence in Research and Education in AgroMeteorology (GCREAM) including graduate programmes under the framework of GENRI as a governing hub of Global Initiatives in AgroMeteorology (GIAM of CAgM). It would be coordinated under the framework of GENRI as a governing hub for all global initiatives such as GFAMS, GAMPP, GAPON including WAMIS II, primarily targeting on GFCS implementations.

• Journal of Arbitration Studies
• /
• v.24 no.2
• /
• pp.33-52
• /
• 2014

Although climate change is a global scale question, some concerns have been raised that principles of investment arbitration may not adequately address the domestic implementation of climate change measures. A recent ICSID investment arbitration of Vattenfall v. Germany with regard to the investor's alleged damages from the phase-out of nuclear plants is a salient climate change case. The 2005 Kyoto Protocol was made to reduce greenhouse gas emissions and it provides a number of flexible mechanisms such as Joint Implementation (JI) and Clean Development Mechanism (CDM). Implementation of the Kyoto Protocol allows dispute settlement through investor-state arbitration. Any initiation of stricter emission standards can violate the prohibition on expropriations in investment agreements, regardless of the measures created to reduce greenhouse gas emissions. The effect-based expropriation doctrine can charge changes to existing emission standards as interference with the use of property that goes against the legitimate expectation of a foreign investor. In regulatory chill, threat of investor claims against the host state may preclude the strengthening of climate change measures. Stabilization clauses also have a freezing effect on the hosting state's regulation and a new law applicable to the investment. In the fair and equitable standard, basic expectations of investors when entering into earlier carbon-intensive operations can be affected by a regulation seeking to change into a low-carbon approach. As seen in the Methanex tribunal, a non-discriminatory and public purpose of environmental protection measures should be considered as non-expropriation in the arbitral tribunal unless its decision would intentionally impede a foreign investor's investment.