• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.4
• /
• pp.595-601
• /
• 2011

This study proposed the system to automatically control the optimized raising environment for vegetation, raised in an equipment house, in which u-IT agricultural technology concept was applied. The system consists of environment sensors such as temperature, humidity, etc., biosensors such as EC, PH, etc., and requested automatic control devices, in which they were automatically controlled by the software system. The system is established in client systems, installed in each equipment house and the server system, collecting data from each client system as well. In addition, the system collects each farmer's data through the Internet and 3G network. In this phase, collected raising environment data comes to be analyzed in order to find out the optimized vegetation raising environment, finally, which is visualized and used for consulting each farmer.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.292-297
• /
• 2016

Since continuous descent operations (CDO) is one of several tools available to aircraft operators and air navigation service providers (ANSPs) to increase safety, flight predictability, and airspace capacity while reducing noise, controller-pilot communications, fuel burn and emissions, widespread implementation of CDO would result in significant reductions in the environmental impact and aircraft operation costs in south korea as well. After analyzing each procedure from standard terminal arrival routes used for the Incheon international airport, it can be noticed that one of the procedures has a relatively high altitude constraint at initial approach fix than others, which lead the pilots to use unnecessary drag device in certain situations. Therefore we came to a conclusion that some arrival procedures need to be revised, so unnecessary procedure required during approach can be minimized, thereby reducing fuel consumption, noise and emissions compared to current approach procedures. And it is going to increase the safety margin significantly during approach phase due to reduced workload.

• The KIPS Transactions:PartD
• /
• v.10D no.3
• /
• pp.547-558
• /
• 2003

From the viewpoint of that music melody has the similar features to time-series data, music melody is transformed to a time-series data with normalization and corrections and the similarity between melodies is defined as the Euclidean distance between the transformed time-series data. Then, based the similarity between melodies of a music object, melodies are clustered and the representative of each cluster is extracted as one of theme melodies for the music. To construct the theme melody index, a theme melody is represented as a point of the multidimensional metric space of M-tree. For retrieval of user's query melody, the query melody is also transformed into a time-series data by the same way of indexing phase. To retrieve the similar melodies to the query melody given by user from the theme melody index the range query search algorithm is used. By the implementation of the prototype system using the proposed theme melody index we show the effectiveness of the proposed methods.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.4
• /
• pp.71-80
• /
• 2016

Meanwhile, reference evapotranspiration(ET0) is important information for agricultural management including irrigation planning and drought assessment, the database of reference evapotranspiration for future periods was rarely constructed especially at districts unit over the country. The Coupled Model Intercomparison Project Phase 5 (CMIP5) provides several meteorological data such as precipitation, average temperature, humidity, wind speed, and radiation for long-term future period at daily time-scale. This study aimed to build a database for reference evapotranspiration using the climate forecasts at high resolution (the outputs of HadGEM3-RA provided by Korea Meteorological Administration (KMA)). To estimate reference evapotranspiration, we implemented four different models such as FAO Modified Penman, FAO Penman-Monteith, FAO Blaney-Criddle, and Thornthwaite. The suggested database system has an open architecture so that user could add other models into the database. The database contains 5,050 regions' data for each four models and four Representative Concentration Pathways (RCP) climate change scenarios. The developed database system provides selecting features by which the database users could extract specific region and period data.

• Journal of Broadcast Engineering
• /
• v.7 no.3
• /
• pp.248-261
• /
• 2002

In this paper, we proposed a new 3-dimensional(3-D) object-tracking algorithm that can control a stereo camera using a variable window mask supported by which uses ,B-D information and an optical BPEJTC. Hence, three-dimensional information characteristics of a stereo vision system, distance information from the stereo camera to the tracking object. can be easily acquired through the elements of a stereo vision system. and with this information, we can extract an area of the tracking object by varying window masks. This extractive area of the tracking object is used as the next updated reference image. furthermore, by carrying out an optical BPEJTC between a reference image and a stereo input image the coordinates of the tracking objects location can be acquired, and with this value a 3-D object tracking can be accomplished through manipulation of the convergence angie and a pan/tilt of a stereo camera. From the experimental results, the proposed algorithm was found to be able to the execute 3-D object tracking by extracting the area of the target object from an input image that is independent of the background noise in the stereo input image. Moreover a possible implementation of a 3-D tele-working or an adaptive 3-D object tracker, using the proposed algorithm is suggested.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.1
• /
• pp.1-9
• /
• 2004

In this study, we presented a research about the development of the phoropter simulation program for education using the 3-D virtual reality in order to study the ophthalmic optics rather efficiently. Especially, by putting the facility such as the refractive error analysis of the eyeball in the cyber tutor inside, we have made the learner to learn and confirm the present situation of refractive correction through refractive power of principal meridians. By organizing the system which induces the active involvement of the learner and showing the result of the execution to the learner intuitively, the implementation of the more efficient education-environment can be possible. Consequently, it is expected that this program will be greatly helpful for the optician training as well as the ophthalmic optics education. As a next phase of study, we will develope the development technique of this simulator more and extend the cyber tutor contents more and make the web service version of this program to be provided through the internet network in order to inspire the learning desire of the learner more and more.

• Computers and Concrete
• /
• v.26 no.3
• /
• pp.203-211
• /
• 2020

Turkey is located in one of the most seismically active regions of in Europe. The majority of the population living in big cities are at high seismic risk due to insufficient structural resistance of the existing buildings. Such a seismic risk brings the need for a comprehensive seismic evaluation based on the risk analysis in Turkey. Determining the seismic resistance level of existing building stock against the earthquakes is the first step to reduce the damages in a possible earthquake. Recently in January 2020, the Elazig earthquake brought the importance of the issue again in the public. However, the excessive amount of building stock, labor, and resource problems made the implementation phase almost impossible and revealed the necessity to carry out alternative studies on this issue. This study aims for a detailed investigation of residential buildings in Antalya, Turkey. The approach proposed here can be considered an improved state of building survey methods previously identified in Turkey's Design Code. Antalya, Turkey's fifth most populous city, with a population over 2.5 Million, was investigated as divided into sub-regions to understand the vulnerability, and a threshold value found for the study area. In this study, 26,610 reinforced concrete buildings between 1 to 7 stories in Antalya were examined by using the rapid visual assessment method. A specific threshold value for the city of Antalya was determined with the second level examination and statistical methods carried out in the determined sub-region. With the micro zonation process, regions below the threshold value are defined as the priority areas that need to be examined in detail. The developed methodology can be easily calibrated for application in other cities and can be used to determine new threshold values for those cities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.420-426
• /
• 2011

In this paper, we introduce a system which helps to draw a conceptual class diagram from the problem description by combining various class diagram deriving methods. Generally, problem description is a kind of statements including user requirements in the early development phase. The system developer can derive a conceptual class diagram from this document, which playes an important role during the object-oriented software development. Until now, it is not easy for the novice to elicit classes because it requires good experience and intuition. In addition, there are also some difficulties of finding valid conceptual classes by hand when the size of system becomes larger. Therefore, we develop a system to solve these problems so that the developer is able to construct the conceptual class diagram easily.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2750-2759
• /
• 2009

In this paper, we analyze vulnerabilities in a remote authentication protocol using smartcards which was proposed by Bindu et al. and propose an improved scheme. The proposed scheme can prevent from restricted replay attack and denial of service attack by replacing time stamp with random number. In addition, this protocol can guarantee user anonymity by transmitting encrypted user's ID using AES cipher algorithm. The computational load in our protocol is decreased by removing heavy exponentiation operations and user efficiency is enhanced due to addition of password change phase in which a user can freely change his password. Furthermore, we really implement the proposed authentication protocol using a STM smartcard and authentication server. Then we prove the correctness and effectiveness of the proposed remote authentication system.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.2
• /
• pp.117-124
• /
• 2004

In this paper, we have been implemented the QPSK-based underwater transmission systems using DSP in order to transmit the underwater image data. We have adopted a BDPA (Block Data Parallel Architecture) to control multiple DSPs used in the transmitter and receiver in order to transmit the image data in real-time. We also have developed GUI software in order to drive and to debug the implemanted system in real-time. We have executed open sea tests in order to analyze the performance of the implemented system at East Sea near Kosung in Kangwon-Do. As a result of these experiments, it has been demonstrated that 10 kbps image data can be received without errors at 30m and 80m depth points, while the distance between the transmitter and the receiver is up to 20m.