• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.440-449
• /
• 2008

In this paper, we propose a 16-QAM carrier recovery loop which is suitable for the implementation of Inmarsat M4 system receiver. Because the frequency offset of ${\pm}924\;Hz$ on signal bandwidth 33.6 kHz is recommended in Inmarsat M4 system specification, carrier recovery loop having stable operation in the channel environment with large relative frequency offset is required. the carrier recovery loop which adopts only PLL can't be stable in relatively large frequency offset environment. Therefore, we propose a carrier recovery loop which has stable operation in large relative frequency offset environment for Inmarsat M4 system. The proposed carrier recovery loop employed differential filter-based noncoherent UW detector which is robust to frequency offset, CP-AFC for initial frequency offset acquisition using UW signal, and 16-QAM DD-PLL for phase tracking using data signal to overcome large relative frequency offset and achieve stable carrier recovery performance. Simulation results show that the proposed carrier recovery loop has stable operation and satisfactory performance in large relative frequency offset environment for Inmarsat M4 system.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.17
• /
• pp.7789-7794
• /
• 2015

Background: This study aimed to evaluate the impact of a community-based health education and communication programme on reducing liver fluke infections caused by the consumption of uncooked fish among people in a high-risk area of Thailand. Materials and Methods: The study was quasi-experimental in nature, with three-stages. Stage 1 involved a situational and capacity analysis of designated communities in Khon Kaen province. This was followed by the development of a model for community-based health education and communication to prevent liver fluke infections among high-risk people, and, lastly, implementation and evaluation of the model were performed. Data were collected using both qualitative and quantitative methods. In total, 390 people were surveyed, and quasi-experimental and comparison groups, each with 90 people, were assessed between May 2011 and April 2012. Analysis was using statistical OR, 95 % CI, the Willcoxon matched pairs signed ranks test, the chi-square test, and the Mann-Whitney U test. Results: The findings showed that most respondents had a high level of knowledge and understanding of liver fluke disease (89.5%, 95% CI:86.0-92.4), and positive attitudes toward the prevention of the disease (94.4%, 95% CI:91.6-96.4). However, with regard to changes in consumption of uncooked fish, most respondents were still in the pre-contemplation phase (55.1%, 95% CI:50.0-60.1), followed by the contemplation phase, 22.6%. Furthermore, four factors were found to be associated with the consumption of uncooked fish - the consumption of alcohol (OR 4.16, 95% CI:1.79-9.65), gender (OR 3.17, 95% CI:1.53-6.54), smoking (OR 3.03, 95% CI:1.31-7.05), and age 40 years and above (OR 2.68, 95% CI:1.02-7.05). After nine months of the health education and communication programme using local media based on local wisdom, culture and persons, the results showed that, compared to the control group, members of the experimental group had a higher level of knowledge, a better attitude and lower levels of ill-advised consumption behaviour. Also, it was found that consumption of uncooked fish, by an assessment of the level of stage of change, was reduced. (p-value 0.002). Conclusions: The health education and communication programme developed as part of the study was effective in changing the consumption of uncooked fish. Therefore, this approach should be promoted in other high-risk areas in Thailand in the future.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.21-30
• /
• 1998

In this paper, a digital current control system using a FPGA(Field Programmable Gate Array) was implemented, and the system was applied to an induction motor widely used as an industrial driving machine. The FPGA designed by VHDL(VHSIC Hardware Description Language) consists of a PWM(Pulse Width Modulation) generation block, a PWM protection block, a speed measuring block, a watch dog timer block, an interrupt control block, a decoder logic block, a wait control block and digital input and output blocks respectively. Dedicated clock inputs on the FPGA were used for high-speed execution, and an up-down counter and a latch block were designed in parallel, in order that the triangle wave could be operated at 40 MHz clock. When triangle wave is compared with many registers respectively, gate delay occurs from excessive fan-outs. To reduce the delay, two triangle wave registers were implemented in parallel. Amplitude and frequency of the triangle wave, and dead time of PWM could be changed by software. This FPGA was synthesized by pASIC 2SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to digital current control system for 3-phase induction motor. The digital current control system of the 3 phase induction motor was configured using the DSP(TMS320C31-40 MHz), FPGA, A/D converter and Hall CT etc., and experimental results showed the effectiveness of the digital current control system.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.4
• /
• pp.78-86
• /
• 1999

In this paper, a distributed arithmetic digital neural network with learning and testing phase implemented in a body has been studied. The proposed technique is based on the two facts; one is that the weighting coefficients adjusted will be stored in registers without shift, because input values or input patterns are not changed while learning and the other is that the input patterns stored in registers are not changed while testing. The proposed digital neural network is simulated by hardware description language such as VHDL and verified the performance that the neural network was applied to the recognition of seven-segment. To verify proposed neural networks, we compared the learning process of modified perceptron learning algorithm simulated by software with VHDL for 7-segment number recognizer. The results are as follows: There was a little difference in learning time and iteration numbers according to the input pattern, but generally the iteration numbers are 1000 to 10000 and the learning time is 4 to 200$\mu\textrm{s}$. So we knew that the operation of the neural network is learned in the same way with the learning of software simulation, and the proposed neural networks are properly operated. And also the implemented neural network can be built with less amounts of components compared with board system neural network.

• Land and Housing Review
• /
• v.5 no.3
• /
• pp.151-167
• /
• 2014

Urban space structure in South Korea when through drastic changes ever since public housing policies began their full-fledge implementation. That is, public housing policies represent the main cause for formation of the current urban space structure, as the public houses are constructed in accordance with changes of demographic/social structure, considering changes of housing demand, in urban spaces demanded by the end users. After rapid industrialization and urbanization in the 1960's, each government in different periods have implemented housing supply policies through massive urban developments, to resolve the issue of housing shortage and residential instability. Phase 1 New Towns were developed in the 1980's resulting in suburbanization of the Seoul Area, followed by urban sprawl due to construction of small-size New Towns after deregulation in the 1990's, and construction of Phase 2 New Towns for resolution of housing shortage in the early 2000's and the resulting urban problems. In the mid-2000's, construction of Bogeumjari houses in GB areas led to insufficient housing supply in downtown areas, and the period after 2010 witnessed continuous deterioration of existing urban areas and acceleration of the rental housing crisis caused by rental housing shortage in downtown areas. Moreover, the residentially vulnerable classes consisting of young, 1~2-member households is expanding, with the real estate market in recess. Therefore, the government is trying to achieve urban regeneration through public housing policies so as to resolve the urban space problem and the housing problem at the same time, and the Happiness Housing Project has been implemented as a policy to achieve that goal. The Happiness Housing Project for young, residentially vulnerable classes in downtown areas, is going through diversification aimed at conjunction with urban regeneration projects in downtown areas, as exemplified by conversion of rental houses in residential environment improvement project districts and redevelopment/reconstruction project districts into happiness housing, and supply of happiness housing in conjunction with small reorganization projects for deteriorated residential areas in such areas as those excluded from New Town designation. Continuous supply of Happiness Housing in conjunction with urban regeneration requires mixed-use residential development which includes convenience facilities and public facilities, along with improvement of rental conditions (rental period/rent) and diversification of project methods, considering that the project is implemented in downtown areas.

• The KIPS Transactions:PartC
• /
• v.11C no.1
• /
• pp.141-148
• /
• 2004

Recently, the demand of broadband communications such as high-speed internet, HDTV, 3D-HDTV and ATM backbone network has been increased drastically. For transmitting the broad-bandwidth data using wireless network, it is needed to use ka-band frequency. However, the use of this ka-band frequency is seriously affected to the received data performance by rain fading and atmospheric propagation loss at the Ka-band satellite communication link. So, we need adaptive MODEM to endure the degraded performance by channel environment. In this paper, we will present the structure and design of the 155Mbps adaptive Modem adaptively compensated against channel environment. In order to compensate the rain attenuation over the ka-band wireless channel link, the adaptive coding schemes with variable coding rates and the multiple modulation schemes such as trellis coded 8-PSK, QPSK, and BPSK are adopted. And the blind demodulation scheme is proposed to demodulate without Information of modulation mode at the multi-mode demodulator, and the fast phase ambiguity resolving scheme is proposed. The design and simulation results of adaptive Modem by SPW model are provided. This 155Mbps adaptive MODEM was designed and implemented by single ASIC chip with the $0.25\mu{m}$ CMOS standard cell technology and 950 thousand gates.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.421-430
• /
• 2011

Thermal conditions in practice at the traditional bronze workshop of the Korean Folk Village in Yongin were examined along with the microstructures of some high tin bronze objects made there. Laboratory experiments approximating the conditions of the workshop were also carried out and the results were compared. The operating temperature of the workshop furnace was measured to range from $750^{\circ}C$ to $850^{\circ}C$ while the surface temperature of an object, upon its removal from the furnace for additional thermo-mechanical treatments, was generally in the range of $600^{\circ}C$ to $685^{\circ}C$. This variation in working temperatures was reflected in varying microstructures developed upon quenching. The products of the Folk Village were found to consist of microstructures where the ${\alpha}$ grains of the Cu-Sn system were distributed in the background of different phases including the ${\beta}$-martensite phase, retained ${\gamma}$ phase, ${\alpha}+{\delta}$ eutectoid or their mixtures. This variability, which is also identified in objects made in ancient times as well as in our laboratory experiments, suggests that the actual thermal conditions given during the quenching treatments are much more complicated than is inferred from the temperature measurements. This paper will present detailed accounts of the thermo-mechanical treatments as observed in the high tin bronze workshop of the Korean Folk Village and discuss the evolution of varying microstructures in terms of the substantial variability involved in the implementation of the traditional forged high tin bronze technology of Korea.

• Journal of Technology Innovation
• /
• v.20 no.2
• /
• pp.161-187
• /
• 2012

Recently, environmentally friendly technology are becoming important due to reconsideration about climate change and environmental pollution. In addition, as well as technical skills and social interaction through an analysis of the nonlinear transition management and policy implementation are emerging. This study of the development of photovoltaic industry in Korea 10 years analyze with strategic niche management (SNM) based on the theoretical and multi-layered perspective (MLP) is used as the analytical framework. Choose the gerverment-support project for niche technology, through a process of quantifying and alnalyze the phase transition to Regime with the numerical method and policy vision, learning effects, and network that key elements of SNM, MLP. Through the analysis of the photovoltaic industry technology-commercialization phase was investigated. This conventional overall and step-by-step model for technical management is proposed to replace exiting linear and narrow method and through the case study its validity was confirmed.

• Journal of Sensor Science and Technology
• /
• v.11 no.2
• /
• pp.67-76
• /
• 2002

We have presented a 2-dimensional fluxgate sensor with ferrite core, excitation, and pick-up coil. This fluxgate sensor system consists of a sensing element, driving circuits for excitation coil and signal processing for detecting second harmonic frequency component which is proportional to the DC magnetic to be measured. The sensor core is excited by a square waveform of voltage through the excitation coil of 80 turns. The second harmonic output of pick-up coil(x and y axis: 100 turns) is measured by FFT spectrum analyzer. This result is compared with output of PSD(phase sensitive detector) unit for detecting the second harmonic component. The measured maximum sensitivity is about 1580 V/T at driving frequency of 1.5 kHz and excitation current of 2 App. The nonlinearity of this system is measured about 2.3%(PSD) and about 1%(second harmonics of the pick-up). The angle error of the system is ${\pm}2$ %/FS.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.69-76
• /
• 2009

We report an implementation of the Ground Penetrating Radar (GPR) survey at a site that corresponds to a ruined castle. The objective of the survey was to characterise buried archaeological structures such as walls and tiles in Van Khan Tooril's Ruin, Mongolia, by 2D and 3D GPR techniques. GPR datasets were acquired in an area 10mby 9 m, with 10 cm line spacing. Two datasets were collected, using GPR with 500MHz and 800MHz frequency antennas. In this paper, we report the use of instantaneous parameters to detect archaeological targets such as tile, brick, and masonry by polarimetric GPR. Radar polarimetry is an advanced technology for extraction of target scattering characteristics. It gives us much more information about the size, shape, orientation, and surface condition of radar targets. We focused our interpretation on the strongest reflections. The image is enhanced by the use of instantaneous parameters. Judging by the shape and the width of the reflections, it is clear that moderate to high intensity response in instantaneous amplitude corresponds to brick and tiles. The instantaneous phase map gave information about the location of the targets, which appeared as discontinuities in the signal. In order to increase our ability to interpret these archaeological targets, we compared the GPR datasets acquired in two orthogonal survey directions. A good correlation is observed for the alignments of reflections when we compare the two datasets. However, more reflections appear in the north-south survey direction than in the west-east direction. This is due to the electric field orientation, which is in the horizontal plane for north-south survey directions and the horizontally polarised component of the backscattered high energy is recorded.