• The Journal of Advanced Prosthodontics
• /
• 제2권1호
• /
• pp.4-6
• /
• 2010

PURPOSE. The aim of this article is to analyze the preference for treatment modality of dentists. MATERIAL AND METHODS. Data of 20,038 patients was involved. Data analysis were done by distribution according to the various kinds of prosthesis, including complete denture, removable partial denture, fixed partial denture, implant-supported dental prosthesis as well as distribution according to the professional titles of the dentists finishing the treatment, including resident and professors. RESULTS. The number of cases of dental prosthesis increased year by year. 61.06% of the patients accepted fixed partial denture restoration. The number of patients who accepted implant supported restoration is also increasing year by year. The number of complete denture, implant-supported dental prosthesis finished by professors was larger than that done by residents, while it was contrary for removable partial denture, fixed partial denture, and the difference was statistically significant (P < .05). CONCLUSION. Professors and residents have some difference in the categorization of prosthesis finished. Fixed partial denture and implant-supported dental prosthesis are preferred.

• The Journal of Advanced Prosthodontics
• /
• 제4권1호
• /
• pp.57-59
• /
• 2012

The scars and contracture around the oral-facial region may cause difficulty in prosthodontic treatment to restore esthetics and function for the patients, who suffered severe burns. This article presents a technique that uses a fixed partial denture prepared with a conventional milling technique and an attachment to support anterior cantilever removable partial denture, thereby providing a more esthetically acceptable and functional result.

• 대한치과보철학회지
• /
• 제60권1호
• /
• pp.29-36
• /
• 2022

상악 무치악 환자의 구강 회복을 계획할 때 치료 방법으로 임플란트를 이용한 고정성 보철 수복과 총의치 수복 또는 임플란트를 이용한 오버덴쳐 등을 고려할 수 있다. 총의치 수복의 경우 추가적인 수술이 필요 없고 상대적으로 경제적이며 임플란트 지지 고정성 보철 수복의 경우 일반적으로 총의치 수복에 비해 기능적인 부분이 우수하지만 임상적으로 임플란트 식립이 어려운 경우가 존재한다. 최근에는 환자의 요구 및 잔존 치조골의 상태 등을 고려하여 부분적으로 임플란트를 식립한 후 임플란트 지지 서베이드 크라운을 이용한 가철성 국소의치 수복도 시도되고 있다. 본 증례는 상악 전방부의 임플란트 지지 서베이드 크라운을 이용한 가철성 국소의치 수복을 시행한 증례로 심미 및 기능적으로 만족할 만한 결과를 보여 보고하는 바이다.

• 대한치과보철학회지
• /
• 제52권2호
• /
• pp.128-135
• /
• 2014

부분 무치악 환자는 고정성 보철, 가철성 국소의치, 임플란트 지지 고정성 보철로 수복될 수 있다. 그러나 소수 잔존치아만 남은 경우, 고정성 보철로는 수복이 어려우며, 국소의치 혹은 임플란트 지지 고정성 보철을 고려하게 된다. 이 경우 임플란트 지지 고정성 보철은 고정성 수복이라는 장점이 있으나, 충분한 개수의 임플란트가 식립되어야 하며, 환자의 전신적, 국소적 여건이 합당해야 하고, 경제적 부담도 크다. 가철성 국소의치는 지대치에 의한 대칭적인 지지가 중요하며, 특히 중심선에 대해 편측으로 소수 치아만 남은 경우에는 지점선에 대해 지대치에 유해한 스트레스를 가하면서 지대치의 예후가 불량해진다. 이 경우, 전략적 위치에 임플란트를 식립함으로써 임플란트를 의치의 유지 및 지지 요소로 활용하는 가철성보철물을 설계한다면 비용 대비 기능적이며 심미적인 보철 수복이 가능해진다. 본 두 증례는 상악 Kennedy Class I 부분 무치악 환자 중 편측으로 소수 잔존치가 전치에 국한하여 존재하는 경우로, 잔존치를 지대치로 사용하면서, 전략적 위치에 임플란트를 식립함으로써 의치의 지지가 향상된 국소의치를 제작한 증례이다.

• 대한치과보철학회지
• /
• 제33권1호
• /
• pp.130-143
• /
• 1995

The purpose of this study was to analyze the magnitude and distribution of stress using photoelastic model with the rigid connection using T-block attachment and non-rigid connection using key & keyway attachment. The vertical load of 16 Kg was applied on the central fossa of the tooth, the pontic and the implant, and the pattern and distribution under each condition was analyzed. The following results were obtained : 1. In case of vertical load on the central fossa of the implant, the stress was concentrated at the apex of the implant involving the mesial alveolar bone in both fixed partial denture with the rigid connection and that with the nonrigid connection and the stress concentration at the mesial cervical area of the implant was a little more in the nonrigid connection than in the rigid connection. 2. In case of vertical load on the central fossa of the pontic, the stress was concentrated at the apex of 2nd bicuspid in both 3 unit fixed partial denture with nonrigid connection and that with the rigid connection. The stress was more concentrated at the mesial alveolar bone of the implant, but the stress distribution at the natural teeth more favorable at the rigid connection than at the non-rigid connection in case of 4 unit fixed partial denture. 3. In case of vertical load of the central fossa of the 2nd bicuspid, much stress with 3 fringe order was observed at the apex of the 2nd bicuspid in the 3 unit fixed partial denture, but relatively even stress distribution was observed at the apex of the implant, the 1st and 2nd bicuspid, and the adjacent cuspid in the 4 unit fixed partial denture.

• 대한치과보철학회지
• /
• 제60권2호
• /
• pp.211-221
• /
• 2022

완전 무치악 악궁을 수복함에 있어 해부학적인 한계 또는 경제적인 제한이 있거나 환자가 광범위한 수술을 원하지 않을 경우에 임플란트 식립이 제한될 수 있다. 이러한 경우 전악 임플란트 고정성 보철물의 대안으로 임플란트 보조 국소의치를 이용할 수 있다. 본 증례는 치주질환으로 다수 치아를 발거하여 상악 완전 무치악과 하악 부분 무치악이 된 56세 여성 환자에서 상악 전방부에 4개의 임플란트를 식립하여 8본 서베이드 보철물과 임플란트 보조 국소의치로 수복하였고, 하악은 전치부 8본 고정성 가공 의치 및 구치부 임플란트 고정성 보철물로 수복하였다. 9년 간의 경과 관찰 시 심미적, 기능적으로 적절한 결과를 얻었기에 이를 보고하고자 한다.

• 구강회복응용과학지
• /
• 제22권1호
• /
• pp.75-87
• /
• 2006

The purpose of this study was to investigate the effects of prostheses misfit, cantilever on the stress distribution in the implant components and surrounding bone using three dimensional finite element analysis. Two standard 3-dimensional finite element models were constructed: (1) 3 ITI implant supported, 3-unit fixed partial denture and (2) 3 ITI implant supported, 3-unit fixed partial denture with a distal cantilever. variations of the standard finite element models were made by placing a $100{\mu}m$ or $200{\mu}m$ gap between the fixture, the abutment and the crown on the second premolar and first molar. Total 14 models were constructed. In each model, 244 N of vertical load and 244 N of $30^{\circ}$ oblique load were placed on the distal marginal ridge of the distal molar. von Mises stresses were recorded and compared in the crowns, abutments, crestal compact bones, and trabecular bones. The results were obtained as follows: 1. In the ITI implant system, cement-retained prostheses showed comparatively low stress distributions on all the implant components and fixtures regardless of the misfit sizes under vertical loading. The stresses were increased twice under oblique loading especially in the prostheses with cantilever, but neither showed the effects of misfit size. 2. Under the oblique loading and posterior cantilever, the stresses were highly increased in the crestal bones around ITI implants, but effects of misfit were not shown. Although higher stresses were shown on the apical portion of trabecular bones, the effects by misfit were little and the stresses were increased by the posterior cantilever. 3. When the cement loss happened in the ITI implant supported FPD with misfit, the stresses were increased in the implant componets and supporting structures.

• 대한치과보철학회지
• /
• 제44권4호
• /
• pp.394-404
• /
• 2006

Statement of problem: A conventional 3-unit fixed partial denture design with a pontic between two retainers is the most commonly used. However in cases where the mental nerve is in close proximity to the second premolar, a cantilever design can be considered. As such, logical and scientific evidence is lacking for the number and position of implants to be placed for partially edentulous patients, and no clear-cut set of treatment principles currently exist. Purpose : The purpose of this study was to evaluate prognosis of implant-supported fixed partial dentures and to compare changes in bone level which may rise due to the different factors. Material and method : The present study examined radiographical marginal bone loss in patients treated with implant-supported fixed partial dentures (87 prostheses supported by 227 implants) and evaluated the influence of the span of the pontic, type of the opposing dentition. Clinical complications were studied using a retrospective method. Within the limitation of this study. the following result were drawn Result, 1. Seven of a total of 227 implants restored with fixed prostheses failed, resulting in a 96.9% success rate. 2. Complications encountered during recall appointments included dissolution of temporary luting agent (17 cases), porcelain fracture (8 cases), loosened screws (5 cases), gingival recession (4 cases), and gingival enlargement (1 case). 3. Marginal bone loss, 1 year after prosthesis placement, was significant(P<0.05) in the group that underwent bone grafting, however no difference in annual resorption rate was observed afterwards. 4. Marginal bono loss, 1 year post-placement, was greater in cantilever-type prostheses than in centric pontic protheses (P<0.05). 5. Marginal bone loss was more pronounced in posterior regions compared to anterior regions (P<0.05). 6. The degree of marginal bone loss was proportional to the length of the pontic (P<0.05). Conclusion: The success rate of implant-supported fixed partial dentures, including marginal bone loss, was satisfactory in the present study. Factors influencing marginal bone loss included whether bone graft was performed, location of the pontic (s), location of the surgical area in the arch pontic span. Long-term evaluation is necessary for implant-supported fixed partial dentures, as are further studies on the relationship between functional load and the number of implants to be placed.

• 대한치과보철학회지
• /
• 제53권1호
• /
• pp.58-65
• /
• 2015

완전 무치악 환자의 수복 시 총의치나 임플란트 지지 피개의치와 더불어 임플란트를 지대치로 이용하는 국소의치가 치료 방법의 하나로 고려될 수 있다. 적은 수의 임플란트를 전략적으로 중요한 위치에 식립한 후 가철성 국소의치로 수복할 경우, 임플란트를 통해 안정을 얻고 부가적으로 유지 및 지지를 확보할 수 있을 뿐만 아니라 광범위한 임플란트 식립을 통한 고정성 보철물에 비해 환자의 수술 부담을 줄여줄 수 있으며, 치료비용 절감 효과도 기대할 수 있다. 본 증례는 오랫동안 국소의치를 사용해 온 환자에서 치아 상실 후 잔존 치조골의 상태 및 환자의 요구를 고려하여 임플란트 지지 국소의치를 제작한 증례로서 전치부에 식립한 임플란트는 고정성 보철물로 수복하고 구치부의 짧은 임플란트는 지지 기능만 부여하였다. 또한 의치상과 클래스프를 열가소성 아크릴 레진으로 제작함으로써 기능적, 심미적으로 만족스러운 치료 결과를 얻었기에 이를 보고하는 바이다.

• The Journal of Advanced Prosthodontics
• /
• 제13권2호
• /
• pp.79-88
• /
• 2021

Purpose. To assess peri-implant stress distribution using finite element analysis in implant supported fixed partial denture with occlusal schemes of cuspally loaded occlusion and implant protected occlusion. Materials and methods. A 3-D finite element model of mandible with D2 bone with partially edentulism with unilateral distal extension was made. Two Ti alloy identical implants with 4.2 mm diameter and 10 mm length were placed in the mandibular second premolar and the mandibular second molar region and prosthesis was given with the mandibular first molar pontic. Vertical load of 100 N and and oblique load of 70 N was applied on occlusal surface of prosthesis. Group 1 was cuspally loaded occlusion with total 8 contact points and Group 2 was implant protected occlusion with 3 contact points. Results. In Group 1 for vertical load, maximum stress was generated over implant having 14.3552 Mpa. While for oblique load, overall stress generated was 28.0732 Mpa. In Group 2 for vertical load, maximum stress was generated over crown and overall stress was 16.7682 Mpa. But for oblique load, crown stress and overall stress was maximum 22.7561 Mpa. When Group 1 is compared to Group 2, harmful oblique load caused maximum overall stress 28.0732 Mpa in Group 1. Conclusion. In Group 1, vertical load generated high implant stress, and oblique load generated high overall stresses, cortical stresses and crown stresses compared to vertical load. In Group 2, oblique load generated more overall stresses, cortical stresses, and crown stresses compared to vertical load. Implant protected occlusion generated lesser harmful oblique implant, crown, bone and overall stresses compared to cuspally loaded occlusion.