• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.2
• /
• pp.184-191
• /
• 2014

In the mandibular posterior molar area, ridge deficiency is an unfortunate obstacle in the field of implant dentistry. Many techniques are available to rebuild the deficient ridge. Selection and necessity of these techniques are associated with significant morbidity and often require a second surgical site. With the advent of guided bone regeneration (GBR), one may now graft the deficient ridge with decreased morbidity and without a second surgical site. In this case, guided bone regeneration procedures were performed with a combination of allograft, xenograft, and alloplast, excepting autogerous bone at severe defected mandibular alveolar ridge and then placed to the implant successfully. We report that implant placement were good in two cases.

• Imaging Science in Dentistry
• /
• v.46 no.2
• /
• pp.109-115
• /
• 2016

Purpose: Sinus elevation procedures have become a routine and reliable way to gain bone volume in the edentulous maxilla for dental implant placement. Presence of bony septations and pathology in the maxillary sinus often cause complications leading to graft or implant failure or both. The aim of this study was to retrospectively evaluate the prevalence of pathology, direction of the septa, and sinus width measured at 2 mm, 5 mm, and 10 mm from the sinus floor in maxillary sinuses using cone-beam computed tomography (CBCT). Materials and Methods: Seventy-two sinuses from 36 random preoperative CBCT scans referred for implant therapy were retrospectively evaluated for the number, prevalence, and direction of bony septations and presence of pathology. Width of the sinus was also measured at 2 mm, 5 mm, and 10 mm from the sinus floor to account for the amount of bone available for implant placement. Results: Maxillary sinus septa were found in 59.7%. Presence of a single septum was noted in 20 sinuses (27.7%), followed by two septa in 17 sinuses. The most common direction of the septum was the transverse direction. Retention pseudocyst and mucosal thickening were the most commonly seen abnormality/pathology. Conclusion: Based on the high prevalence of septa and sinus pathology in this sample, a preoperative CBCT scan might be helpful in minimizing complications during sinus augmentation procedures for dental implant therapy.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.9 no.2
• /
• pp.98-103
• /
• 2009

Background: Despite increasing popularity of dental implants, there is limited information on the pain experience associated with the surgical implant placement under general anesthesia. The aim of this study was to assess the characteristics of patient-reported pain and efficacy of patient controlled analgesia after implant surgery under general anesthesia. Methods: Total 39 patients who underwent implant surgery under general aensthesia were enrolled. In PCA group (n=30), patients received patient controlled analgesia (fentanyl 700 mg and ketorolac 150 mg) set to basal rate 1 ml/h, bolus 1 ml, and lockout interval 10 min. In control group (n=9), patients received ketorolac 30 mg intravenously when they feel painful. We evaluated pain intensity using VAS score at the end and after 12 hr of the operation and recorded the number of bolus injection as a surrogate of rescue therapy. We compared the VAS data, the frequency of complication between two groups. Results: The self reported pain was highest at 1 hous after surgery in both groups. However, the intensity was not severe (PCA group = 5.7, control group = 5.6), and decreased gradually thereafter. Total demand bolus number was less than 6 in nearly 65% patients. And there was no significant difference in the frequency of complications such as nausea, vomiting and dizziness between both groups. Conclusions: The Pain following the surgical placement of dental implants was generally mild and gradually decreased with time. There was no difference in complications between control group and PCA group.

• Imaging Science in Dentistry
• /
• v.52 no.2
• /
• pp.197-207
• /
• 2022

Purpose: This study evaluated the associations of the dental arch form, age-sex groups, and sagittal root position (SRP) with alveolar bone thickness of the maxillary central incisors using cone-beam computed tomography (CBCT) images. Materials and Methods: CBCT images of 280 patients were categorized based on the dental arch form and age-sex groups. From these patients, 560 sagittal CBCT images of the maxillary central incisors were examined to measure the labial and palatal bone thickness at the apex level and the palatal bone at the mid-root level, according to the SRP classification. The chi-square test, Kruskal-Wallis test, and multiple linear regression were used for statistical analyses. Results: Significant differences were found in alveolar bone thickness depending on the arch form and SRP at the apex level. The square dental arch form and class I SRP showed the highest bone thickness at both levels of the palatal aspect. The taper dental arch form and class II SRP presented the highest bone thickness at the apex level of the labial aspect. No association was found between the dental arch form and SRP. Elderly women showed a significant association with thinner alveolar bone. Age-sex group, the dental arch form, and SRP had significant associations with alveolar bone thickness at the apex level. Conclusion: The patient's age-sex group, dental arch form, and SRP were associated with alveolar bone thickness around the maxillary central incisors with varying magnitudes. Therefore, clinicians should take these factors into account when planning immediate implant placement.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.3
• /
• pp.256-263
• /
• 2011

Purpose: The purpose of this study was to evaluate the effectiveness of autogenous tooth graft materials after maxillary sinus bone grafts. Methods: The study involved 23 implants in 22 patients who visited the Department of Oral and Maxillofacial Surgery and the Department of Periodontics, Chosun University Dental Hospital, in 2008 and received autogenous tooth graft materials for maxillary sinus bone grafts. Results: For eight patients with maxillary bone graft materials prior to implant placement, the healing period averaged five months. For eleven patients with simultaneous maxillary bone graft and implant placement, eight patients received a second surgery, with an average healing time of six months. Three patients had a longer observation period with only a fixture implanted. Three patients who received only a bone graft required more time to implant placement because of the lack of residual bone and also for personal reasons. Only 5 patients had biopsies performed and complications such as infection and dehiscence healed well. The application of autogenous graft materials to the maxillary bone graft sites did not exert any significant effects on the success rates. When a mixture of graft materials was used, the post-surgical bone resorption rate was reduced. Histological analysis showed that new bone formation and remodeling were initiated during the three-to-six month healing period. Bone formation capacity increased continuously up to six months after the maxillary bone graft. Conclusion: According to this analysis, excellent stability and bone-forming capacity were seen in cases where autogenous materials were used alone or mixed with other materials. Autogenous tooth graft materials may be substituted instead of autogenous bones.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.3.1-3.8
• /
• 2018

Background: In this research article, we evaluate the use of sub-periosteal tunneling (tunnel technique) combined with alloplastic in situ hardening biphasic calcium phosphate (BCP, a compound of β-tricalcium phosphate and hydroxyapatite) bone graft for lateral augmentation of a deficient alveolar ridge. Methods: A total of 9 patients with deficient mandibular alveolar ridges were included in the present pilot study. Ten lateral ridge augmentation were carried out using the sub-periosteal tunneling technique, including a bilateral procedure in one patient. The increase in ridge width was assessed using CBCT evaluation of the ridge preoperatively and at 4 months postoperatively. Histological assessment of the quality of bone formation was also carried out with bone cores obtained at the implant placement re-entry in one patient. Results: The mean bucco-lingual ridge width increased in average from 4.17 ± 0.99 mm to 8.56 ± 1.93 mm after lateral bone augmentation with easy-graft CRYSTAL using the tunneling technique. The gain in ridge width was statistically highly significant (p = 0.0019). Histomorphometric assessment of two bone cores obtained at the time of implant placement from one patient revealed 27.6% new bone and an overall mineralized fraction of 72.3% in the grafted area 4 months after the bone grafting was carried out. Conclusions: Within the limits of this pilot study, it can be concluded that sub-periosteal tunneling technique using in situ hardening biphasic calcium phosphate is a valuable option for lateral ridge augmentation to allow implant placement in deficient alveolar ridges. Further prospective randomized clinical trials will be necessary to assess its performance in comparison to conventional ridge augmentation procedures.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.28 no.2
• /
• pp.64-73
• /
• 2019

Various techniques have been developed, and the development of piezo electric devices have made it possible to widen the alveolar ridge even if the residual bone is dense or if there is a lack of cancellous bone between the cortical bones. In the operation of the mandibular posterior area, the flap is easily accessible to the ramus bone, from which high quality autogenous bone can be obtained, compared to other parts. A small autologous bone block can be used with particulated bone graft material using one screw for bone regeneration instead of a large autologous bone with two screws. The tapered implant design can minimize buccal bone fracture, even in severely atrophic mandibular areas. We report a case of 4 years following implant placement with ridge splitting and small autogenous bone graft in severly atrophic mandible. This report demonstrates a case of functional and aesthetic restoration in a patient through a collaboration.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.3
• /
• pp.202-208
• /
• 2010

Purpose: This study was aimed to evaluate the effect of rhPMP-2 coated implants on alveolar ridge augmentation in dogs. Materials and methods: Six Beagle dogs were used in this study. Six 8.0 mm long anodized surface titanium implants were placed 5 mm into the mandibular alveolar ridge following 6 month of healing period after extraction. Each animal received three implants coated with rhBMP-2 and three uncoated control implants using the randomized split-mouth design. Radiographic examinations were undertaken immediately at implant placement (baseline), at weeks 4 and 8 after implant placement. The amount of bone augmentation was evaluated by measuring the distance from the uppermost point of the coverscrew to the marginal bone. Implant Stability Quotient (ISQ) values were measured immediately at implant placement and 8 weeks after implant placement. For the statistical analysis, Man-Whitney ranksum test and Wilcoxon signed rank test of SPSS 12.0 software were used (P=.05). Results: The BMP group exhibited radiographic vertical bone augmentation about $0.6{\pm}0.7$ mm at 8 weeks later while controls showed bone loss about $0.4{\pm}0.6$ mm. There was significant difference among the rhBMP-2 group and controls in bone level change (P<.05). The ISQ values were significantly higher in the BMP-2 group than the control group at 8 weeks later (P<.05), while there was no significant difference at surgery. Conclusion: Within the limitation of this study, the rhBMP-2 coated on anodized implant could stimulate vertical alveolar bone augmentation, which may increase implant stability significantly on completely healed alveolar ridge.

• Journal of Periodontal and Implant Science
• /
• v.49 no.1
• /
• pp.39-46
• /
• 2019

Purpose: This study aimed to evaluate the effects of i) the extent of peri-implant bone defects and ii) the application of bone cement on implant stability with respect to the measurement direction. Methods: In 10 bovine rib bones, 4 implant osteotomies with peri-implant bone defects of various widths were prepared: i) no defect (D0), ii) a 2-mm-wide defect (D2), iii) a 4-mm-wide defect (D4), and iv) a 8-mm-wide defect (D8). The height of all defects was 10 mm. Implant stability quotient (ISQ) values and Periotest values (PTVs) were measured after implant placement and bone cement application. Results: With increasing defect width, decreased ISQs and increased PTVs were observed. Statistically significant differences were found between groups D0 and D8, D0 and D4, and D2 and D8. Prior to bone cement application, inconsistent PTVs were found in group D8 depending on the measurement direction. Bone cement increased the implant stability. Conclusion: Peri-implant bone deficits measuring around 50% of the implant surface compromised implant stability. Clinically, PTVs should be cautiously interpreted in implants with large peri-implant defects due to inconsistent recordings with respect to the measurement direction.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.1
• /
• pp.49-53
• /
• 2011

Introduction: This study compared the strength of osseointegration as determined by the resistance to reverse torque rotation of three different hydroxyapatite coated implants in the rabbit femur model. Materials and Methods: Three hydroxyapatite coated implants (HAPTITE), Tapered Screw-Vent (TSV) and BioTite-H - were used. A total of 40 implants were placed in the femur of 20 adult male rabbits. The animals were divided into two groups. In group A (n=10); one HAPTITE was placed into each right femur and one TSV was placed into each left femur. In group B (n=10); one HAPTITE was placed into each right femur and one BioTite-H was placed into each left femur. Five rabbits of each group were sacrificed at 4 and 8 weeks. The implants were removed by reverse torque rotation using a digital torque-measuring device. A total of 40 implants in 20 rabbits were used for the removal torque measurements. Results: In the Group A, 4 weeks after implant placement, the mean removal torque for the HAPTITE and TSV was $70.7{\pm}31.6$ N cm and $28.9{\pm}15.1$ N cm, respectively. Eight weeks after implant placement, the mean removal torque for the HAPTITE and TSV was $87.9{\pm}26.2$ N cm and $54.9{\pm}22.4$ N cm, respectively. In the Group B, 4 weeks after implant placement, the mean removal torque for the HAPTITE and BioTite-H was $58.0{\pm}29.6$ N cm and $37.7{\pm}14.1$ N cm, respectively. Eight weeks after implant placement, the mean removal torque for the HAPTITE and BioTite-H was $91.4{\pm}47.1$ N cm and $30.8{\pm}9.8$ N cm. HAPTITE showed a higher removal torque than the other implants. Conclusion: These results suggest that HAPTITE increases the strength of osseointegration significantly as determined by the resistance to reverse torque rotation.