• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1418_1419
• /
• 2009

This paper presents the transient impedance when high current impulse up to 5 kA is applied to a scaled grounding grid in test field. For a realistic analysis of transient impedance on the high current impulse in the ground systems, grounding electrode installed outdoors and impulse current generator was used. The results were discussed based on its voltage and current trace, impulse impedance and V-I curve.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.241-244
• /
• 2000

To investigate the compact effect of the different area of an active layer and the different type of heatsink on the junction to ambient transient thermal impedance, we have characterized the thermal behavior of power MOSFETs that have three different areas of an active layer and two types of heatsink. To do so, the "cooling curve method" has been used in order to measure the junction-to-ambient transient thermal impedance Zthja that represents the thermal behavior of the devices. The measured data depiets that the larger area of an active layer gives the better-in other words. smaller-thermal impedance, and that the larger size of a heatsink improves the thermal impedance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.996-1000
• /
• 2002

A porous tube, comprised of a resin-coated woven fabric has recently been used as an effective component for use in intake systems of internal combustion engines to reduce the intake roaring. For the prediction of the acoustic performance of an engine intake system with a porous woven hose, the acoustic wall impedance of the hose must be known. Because of its peculiar acoustical and structural characteristics, the accurate measurement of the wall impedance ofa porous woven hose is not easy. A new measurement technique is proposed herein, that is valid over the low to mid frequency ranges. The acoustics impedance is inversely estimated from an overdetermined set of measured pressure transmission coefficients for specimens of different lengths and the reflection coefficient of end termination. The method involves only one measurement, and, as a result, it is very simple. The measured TL for samples with arbitrary conditions, arbitrary porous frequency, arbitrary length, and arbitrary mean flow condition, are in reasonably good agreement with values predicted from curve-fitted impedance data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.263-264
• /
• 2008

A method for high impedance fault(HIF) detection based on wavelet transform is presented in this paper. HIF is detected and classified by obtaining the energy distribution curve from the wavelet coefficients at each level. The energy distribution of each transient disturbance has unique deviation from sinusoidal wave in particular energy level, which is adopted to provide reliable classification of the type of transient.

• 분석과학
• /
• 제12권4호
• /
• pp.290-298
• /
• 1999

임피던스 위상각 적정법을 산화환원적정, 산염기적정, 착화적정 그리고 침전적정에 적용하여 정확한 종말점 검출법을 연구하였다. 일정한 교류전류가 두 백금전극사이를 통과하도록 하였고 그중 하나는 $0.1cm^2$ 또는 $0.026cm^2$의 표면적을 가진 초소형 분극전극이었고 다른 하나는 $1cm^2$의 표면적을 비분극전극을 사용하였다. 과망간산칼륨에 의한 옥살산의 산화환원적정에서 임피던스 위상각 적정법을 적용하였을때 $50{\mu}A$, 0.0005 M 이상의 농도에서 뚜렷한 종말점을 얻었고, 50 Hz 근방의 주파수 영역에서 가장 확실한 종말점을 얻을 수 있었다. NaOH에 의한 인산의 산염기 적정에서 0.001 M 수산화나트륨에 의한 0.001 M 인산의 적정시 임피던스 위상각 적정법을 적용하여 $50{\mu}A$, 주파수 25-97 Hz의 넓은 주파수 영역에서 뚜렷한 제1당량점을 얻었다. 이는 전도도의 반대 개념으로서의 임피던스의 변화량이 종말점을 기점으로 변곡하고 이에따라 위상각이 변화하는데 원인됨을 알았다. 또한 제2당량점에서는 임피던스 위상각 적정법으로 뚜렷한 종말점을 얻지 못하였다. 이는 $Na_2HPO_4$의 가수분해를 막기 위하여 적정시 과량으로 첨가되는 NaCl에 의한 방해로 생각된다. 0.1 M EDTA에 의한 0.01 M 황산구리의 착화적정시에는 위상각 측정으로 적정종말점을 찾기 보다는 "다른위상" 임피던스 Z"을 측정하여 종말점을 알아내는 것이 유리함을 알았다. $AgNO_3$에 의한 $Cl^-$의 침전적정에 있어 $100{\mu}A$, 0.1 M 농도에서 임피던스 위상각 적정법을 적용하여 명확한 종말점을 얻었고, 15-30Hz 범위에서 가장 안정적인 뚜렷한 변화를 볼 수 있었다. 그러나 0.01 M 농도에서는 임피던스 위상각의 뚜렷한 변화를 볼 수 없었다. 본 연구에서 임피던스 위상각 적정법을 산화환원적정, 산염기적정, 착화적정 그리고 침전적정시의 종말점 검출을 위해 사용하였을 때 대부분 성공적이었으며 이는 적정시 종말점을 정확히 측정하는 목적에 활용 할수 있음을 보여주는 것이다.

• 조명전기설비학회논문지
• /
• 제13권2호
• /
• pp.80-87
• /
• 1999

본 논문은 신경회로망을 이용하여 배전선로상의 고저항 사고검출기법을 제안하였다. 다양한 토양에서 실시한 고저항 사고 데이터를 통해 $\upsilon-i$ 특성곡선을 얻고, 이 특성곡선으로 EMTP를 이용하여 고저항 사고를 모의하였다. 배전선로 고저항 사고검출을 위해 훈련 모델은 강자갈을 사용하였고, 토양의 조건을 달리하여 신경회로망의 사고검출 성능을 평가하였다. 신경회로망의 입력으로 사고 전류를 주파수 분석한 후, 이를 한 주기 평균하여 얻어진 짝.홀수 고조파, 기본파, 실효치 지수을 이용하였다. 신겨회로망의 검출성능을 테스트한 결과 제안된 방법이 뛰어남을 확인하였다.

• Corrosion Science and Technology
• /
• 제15권6호
• /
• pp.311-313
• /
• 2016

The anodic dissolution behavior of copper and brass in an electrolyte solution of 0.5M NaCl containing 0.5 mM $NaHCO_3$ was investigated by electrochemical impedance spectroscopy. The Nyquist plots of the copper impedance described a small loop in the high-frequency range and a large locus in the low-frequency range. Additionally, the features of the impedance spectrum of the brass were similar to those of the copper. This indicates that the copper-enriched layer formed on the brass surface due to the selective dissolution of the zinc from the surface. In addition, the rest potential and the anodic polarization curve for each sample were measured in order to discuss the selective dissolution of the zinc from the brass surface.

• 대한금속재료학회지
• /
• 제47권10호
• /
• pp.644-651
• /
• 2009

The passivation (or deactivation) of a metal surface during oxide film formation has been quantitatively explored for a ferritic stainless steel by using dynamic electrochemical impedance spectroscopy (DEIS). For this purpose, the electrochemical impedance spectra were carefully examined as a function of applied potential in the active nose region of the potentiodynamic polarization curve, to separate the charge transfer resistance and oxide film resistance. From the discrepancy in the potential dependence between the experimental charge transfer resistance and the semi-empirically expected one, the degree of passivation could be quantitatively estimated. The sensitivity of passivation of the steel surface to anodic potential, which might be the measure of the quality of the oxide film formed under unit driving force or over-potential, decreased by 31% when 3.5 wt% NaCl was added to a 5 wt% $H_2SO_4$ solution.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.182-182
• /
• 2009

The effect of Re-oxidation on the PTCR properties of Sm-doped barium titanate ceramics was investigated by means of impedance spectroscopy. Electrical properties such as resistance vs. temperature, I-V curve were measured and microstructure was observed with SEM photography. Sample was fabricated with thick film process such as tape casting of green sheet, screen printing of electrode pattern, stacking, firing in reduced atmosphere and re-oxidation, etc. As the temperature of re-oxidation increases, resistance jump as a function of temperature enhances but resistance at room temperature increases. These behavior of resistance as a function of temperature, dependent on the re-oxidation condition, is analyzed with Cole-Cole impedance plot and is shown to be related with the degree of oxidation of grain boundary regardless of grain core during re-oxidation process of sample.

• 전력전자학회논문지
• /
• 제25권4호
• /
• pp.251-260
• /
• 2020

A growing interest has emerged in recycling used automobile batteries into energy storage systems (ESSs) to prevent their harmful effects to the environment from improper disposal and to recycle such resources. To transform used batteries into ESSs, composing battery modules with similar performance by grading them is crucial. Imbalance among battery modules degrades the performance of an entire system. Thus, the selection of modules with similar performance and remaining life is the first prerequisite in the reuse of used batteries. In this study, we develop an instrument to measure the impedance spectrum of a battery module to predict the useful remaining life of the used battery. The developed hardware and software are used to apply the AC perturbation to the used battery module and measure its impedance spectrum. The developed instrument can measure the impedance spectrum of the battery module from 0.1 Hz to 1 kHz and calculate the equivalent circuit parameters through curve fitting. The performance of the developed instrument is verified by comparing the measured impedance spectra with those obtained by a commercial equipment.