• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.5963-5967
• /
• 2014

본 자동차 충돌사고는 인간이 자동차 문명을 발전시킨 이래 누려온 편의성의 대가이기 때문에 많은 사람들이 충돌사고 시 승객의 사망과 상해를 기술적으로 감소시키기 위해 여러 가지 노력을 기울여 왔다. 도로교통공단 통계자료에 따르면 승용차 충돌사고로 인한 사망자 충 측면충돌사고에 의한 사망자가 정면충돌사고의 사망자보다 많다. 자동차 설계자들은 이에 대응하기 위해 도어 내부에 임팩트 빔(Impact Beam)과 임팩트 프레임(Impact Frame)이라는 보강재를 추가시켜 왔다. 이러한 보강재 개발을 위해 충돌실험은 필수적이다. 충돌실험의 경우 많은 비용과 시간이 소모되게 된다. 본 연구는 임팩터를 떨어뜨려 충격량과 변형량을 얻을 수 있는 실험장치 개발이 목적이다. 경제적 비용을 줄일 수 있는 이상적인 실험장치 구성을 제시하고, 수치해석 값과 실험결과 값을 비교 분석한 결과 충돌 시작 후 3.5E-3sec에서 각각 3.49E-3, 3.99E-3의 변형량을 나타냈다.

• 대한조선학회논문집
• /
• 제45권6호
• /
• pp.726-734
• /
• 2008

While the structural safety assessment of Cargo Containment System(CCS) in membrane type LNG carriers has to be carried out in consideration of sloshing impact pressure, it is very difficult to figure out its dynamic response behaviors due to its very complex structural arrangements/materials and complicated phenomena of sloshing impact loading. For the development of its original technique, it is necessary to understand the characteristics of dynamic response behavior of CCS structure under sloshing impact pressure. In this study, for the exact understanding of dynamic response behavior of CCS structure in membrane Mark III type LNG carriers under sloshing impact pressure, its wet drop impact response analyses were carried out by using Fluid-Structure Interaction(FSI) analysis technique of LS-DYNA code, and were also validated through a series of wet drop experiments for the enhancement of more accurate shock response analysis technique. It might be thought that the structural response behaviors of impact response analysis, such as impact pressure impulses and resulted strain time histories, generally showed very good agreement with experimental ones with very appropriate use of FSI analysis technique of LS-DYNA code, finite element modeling and material properties of CCS structure, finite element modeling and equation of state(EOS) of fluid domain.

• 한국가스학회지
• /
• 제13권4호
• /
• pp.22-26
• /
• 2009

본 논문은 여러 가지 주름댐퍼를 갖는 안전헬멧의 변형거동 및 변형율 에너지 특성을 유한요소법으로 해석하였다. 안전헬멧은 외부의 충격력을 차단하고, 충격에너지를 흡수하는 것으로 감쇠효과 기능을 갖고 있다. 주름댐퍼를 갖는 3가지의 헬멧모델은 헬멧의 정상부에 최대의 충격력을 가하였을 때 변위량과 변형율 에너지 특성치를 상호간에 비교하였다. 계산한 FEM 해석결과에 의하면, 외부로 돌출한 주름댐퍼는 헬멧의 감쇠효과를 증가시키는 기여도가 높다는 것이다. 본 연구에서 둥근형상의 주름댐퍼는 전달되는 충격에너지를 효과적으로 흡수할 것이라는 사실이다. 따라서 안전헬멧의 하단부에 둥글고 기다랗게 주름댐퍼를 설치한 헬멧을 새로운 설계인자로 고려할 것을 추천한다.

• 한국기계가공학회지
• /
• 제5권2호
• /
• pp.3-9
• /
• 2006

HSM(High-speed Machining) is widely used in rapid manufacturing of precision products and molds of various materials. Improvement in cutting efficiency is one of the important subjects in the HSM process. To analyse the dynamic behavior during a very short cutting time, the computational analysis code, LS-DYNA3D, was employed for the simulation of the mechanism of HSM for aluminium 7075. This cutting mechanism includes some difficult points in simulation, for example, material and geometrical non-linearity, high-speed dynamic impact, contact with friction, etc. In this paper, a finite element model considering the strain rate effect is proposed to predict the cutting phenomena such as chip deformation, strain and stress distributions, which will help us to design the HSM process.

• Journal of Microbiology and Biotechnology
• /
• 제24권4호
• /
• pp.563-567
• /
• 2014

Pseudomonas syringae pv. syringae (Psy) is a major bacterial pathogen of many economically important plant species. Despite the severity of its impact, the genome sequence of the type strain has not been reported. Here, we present the draft genome sequence of Psy ATCC 19310. Comparative genomic analysis revealed that Psy ATCC 19310 is closely related to Psy B728a. However, only a few type III effectors, which are key virulence factors, are shared by the two strains, indicating the possibility of host-pathogen specificity and genome dynamics, even under the pathovar level.

• 한국분말재료학회지
• /
• 제15권3호
• /
• pp.227-233
• /
• 2008

Dynamic plastic deformation behavior of copper particles occurred during the cold spray processing was numerically analyzed using the finite element method. The study was to investigate the impact as well as the heat transfer phenomena, happened due to collision of the copper particle of $20{\mu}m$ in diameter with various initial velocities of $300{\sim}600m/s$ into the copper matrix. Effective strain, temperature and their distribution were investigated for adiabatic strain and the accompanying adiabatic shear localization at the particle/substrate interface.

• Structural Engineering and Mechanics
• /
• 제82권5호
• /
• pp.629-641
• /
• 2022

This study deals with the spinning impact on flap-wise vibration characteristics of nonlocal functionally graded (FG) cylindrical beam based on the Hyperbolic shear deformation beam theory. The nonlocal strain gradient theory is used to investigate the small-scale impact on the nonlocal motion equation as well as corresponding nonlocal boundary conditions. Based on the mathematical simulation and according to the Hamilton principle, the computerized modeling of a rotating functionally graded nanotube is generated, and then, via a numerical approach, the obtained mathematical equations are solved. The calculated outcomes are helpful to the production of Nano-electro-mechanical-systems (NEMS) by investigating some designed parameters such as rotating speed, hub radius, length-scale parameters, volume fraction parameters, etc.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권4호
• /
• pp.215-225
• /
• 2001

Stress waves monitored on the surface of structures under various loading conditions can provide useful information on the structural health status. In this paper, stress waves are measured by several sensors when a steel beam is impacted by a ball drop. The sensors used include the piezo-electric film Sensor, the electrical strain gage, and the ultrasonic transducer, and special attention is given to the pieza film sensor. The wavelet transform is used for the time-frequency analysis of dispersive waves propagating in the beam. The velocities of the wave produced in the team due to the lateral impact is found to be frequency-dependent and identified as the flexural wave velocity based on the comparisons with the Timoshenko beam theory. A linear impact site identification method is developed using the flexural wave, and the impact sites of the beam can be accurately estimated by the piezo film sensors. It is found that the piezo film sensor is appropriate for sensing stress waves due to impact and for locating impact sites in the beam.

• 디지털융복합연구
• /
• 제15권7호
• /
• pp.223-229
• /
• 2017

유럽, 미국을 비롯한 일본 등 선진 업계에서는 오랜 기간의 시험을 거쳐 충격계수의 시험결과를 보유하고 있으며, 장비를 설계할 때 이를 적용하여 구조물의 안정성을 확보하고 있다. 그러나 국내 산업체의 실정으로는 실제 구조물이 받는 여러 가지 동적인 외력에 의한 영향을 시험을 통해 충격계수를 확보하기에는 많은 비용과 시간이 소요되기 때문에 선진업체에서 제공하는 충격계수를 활용하여 장비를 설계하고 있다. 본 논문에서는 유한요소해석 프로그램인 NX/NASTRAN을 이용하여 반도체 검사 장비인 PCB Handler의 정하중해석과 충격하중에 대한 과도응답 해석을 진행하고, 변위 결과를 비교하는 방법으로 충격계수를 산출하였다. 충격계수 산출 방법은 일본 구조 구격에서 사용하고 있는 방법을 적용하였으며, PCB Handler가 검사를 위해 급출발 또는 급정지 시 충격계수는 1.27로 산출되었다. 해석으로 얻어낸 충격계수는 향후 장비의 구조개선과 기존장비를 기반으로 제품 개발 시 사용할 수 있어 업계에 도움이 될 것으로 판단된다.

• 한국재료학회지
• /
• 제34권7호
• /
• pp.330-340
• /
• 2024

Al-Mg-Si alloys are light weight and have excellent corrosion resistance, and are attracting attention as a liner material for high-pressure hydrogen containers in hydrogen fuel cell vehicles. Because it has excellent plastic hardening properties, it is also applied to car body panel materials, but it is moderate in strength, so research to improve the strength by adding Si-rich or Cu is in progress. So far, the authors have conducted research on the intergranular fracture of alloys with excessive Si addition from the macroscopic mechanical point of view, such as specimen shape. To evaluate their impact tensile properties, the split-Hopkinson bar impact test was performed using thin plate specimens of coarse and fine grain alloys of Al-Mg-X (X = Cr,Si) alloy. The effect of the shape of the specimen on the characteristics was studied through finite element method (FEM) analysis. As a result, it was found that the intergranular fracture of the alloy with excessive Si depended on the specimen width (W)/grain size (d), which can be expressed by the specimen size and grain size. As W/d decreases, the intergranular fracture transforms into a transgranular fracture. As the strain rate increases, the fracture elongation decreases, and the fracture surface of the intergranular fracture becomes more brittle. It was confirmed that intergranular fracture occurred in the high strain rate region even in materials with small grain sizes.