• 대한치과보철학회지
• /
• 제35권1호
• /
• pp.118-129
• /
• 1997

The purpose of this study was to evaluate the shock absorbing effect of 4 restorative materials and intramobile connector. The damping effect of four restorative materials used to veneer test crown rigidly connected to IMZ implant and subjected to an impact force was measured. These materials included a gold alloy(stabilor G) : a noble metal ceramic alloy(Degudent H) : porcelain(Duceram) : composite resin(Dentacolor). In addition, this study compared damping effect of same restoretive materials after using polyoxymethylene intramobile connector(POM IMC). The result of this study suggest that : In case of using metal IMC 1. Veneered composite resin(group IV) reduced the impact force by 75%, when compared to an equivalent thickness of porcelain(group III). Group IV reduced the impact force by 87% and 89%, respectively, when compared to Stabilor G(group I) and Degudent H(group II). 2. The impact force recorded was higher for the alloy with the higher elastic modulus.(Stabilor G, group I, Young's modulus 107 Gpa, versus Degudent H, Group II, Young's modulus 95 Gpa) 3. It took the longest time for composite resin veneered group(IV) to reach to peak force when compared group I, II, III. In case of using POM IMC 4. The mean impact force recorded were reduced by 79%(group I), 78%(group II), 69%(group III), 84%(group IV), respectively, when compared to using metal IMC. 5. The time required to reach the peak force were increased by 78%(group I, II) 87%(group III), 34%(group IV), respectively, when compared to using metal IMC>.

• 복합신소재구조학회 논문집
• /
• 제1권3호
• /
• pp.41-48
• /
• 2010

본 논문에서는 폭발하중으로 발생하는 폭풍파의 충격하중과 폭풍파로 초래된 파편의 충돌하중을 동시에 받는 철근 콘크리트 벽체 구조물의 비선형 충돌 손상거동 해석이 수행된다. 이를 위해 먼저 가상 폭발사고 시나리오로부터 철근 콘크리트 구조물에 충격과 충돌 하중이 복합적으로 작용하는 경우를 선정한다. 폭발하중으로 인한 구조물의 저항성능을 확보하기 방안으로는 복합신소재를 보강하는 경우가 고려되고, 복합신소재를 보강하지 않은 철근 콘크리트 벽체 구조물과 보강성능을 비교하여 제시한다. 또한, 막대한 시설과 비용 투자가 요구되는 폭발실험과 근접한 해석을 도출하기 위하여 실제 충격과 충돌 현상을 정확하게 묘사한 구성방정식과 상태방정식을 포함시킨 정교한 해석을 수행한다. 폭발하중과 같은 순간적인 동적 문제를 해석하기 위하여 외연적 고속충돌 해석 프로그램인 AUTODYN-3D을 활용하여 두 가지 대상구조물에 대한 수치 모의실험을 수행하고 복합신소재로 보강된 철근 콘크리트 벽체 구조물의 보강성능을 입증한다.

• 항공우주시스템공학회지
• /
• 제6권1호
• /
• pp.26-32
• /
• 2012

A shock absorber with magnetic effects is suggested for a lunar space-ship expected to launch in 2025. The device consists of a copper steel combined tube, two magnets, and a piston. The piston is designed to move a magnet through the tube when it is pushed by an external impact. While the magnet is moving in the tube, it generates the eddy current force with the copper part of the tube and it also makes the large friction force with the steel part of the tube. Beside, it gets resistive forces against its movement such as the magnetic force with a steel-ring at the first time of the movement and the repulsive force with a same pole opposed magnet at the end time of the movement. In this thesis, results of analyses and experiments of each force are represented and the expected performance of the electromagnetic shock absorber is drawn from the results.

• 한국해양공학회지
• /
• 제19권1호
• /
• pp.20-25
• /
• 2005

The authors performed the underwater explosion analysis for the liquified oxygen tank - a kind of fuel tank of a mid-size submarine, and tried to verify the structural safety for this structure. First, the authors reviewed the theory and application of underwater explosion analysis, using a Structure-Fluid Interaction technique and its finite element modeling scheme. Next, the authors modeled the explosive and sea water as fluid elements, the LOX tank as structural elements, and the interface between the two regions as the ALE scheme. The effect on shock pressure and impulse of fluid mesh size and shape are also investigated. Upon analysis, it was found that the shock pressure due to explosion propagated into the water region, and hit the structure region. The plastic deformation and the equivalent stress were apparent at the web frame and the shock mount of LOX structure, but these values were acceptable for the design criteria.

• 한국추진공학회지
• /
• 제22권5호
• /
• pp.97-106
• /
• 2018

본 논문은 충격파 터널을 이용한 이중압축램프 흡입구 형상의 모델 스크램제트 시험에서 나타난 기술적 난제 및 그 해결 방안들을 정리하였다. 시험 설비 불시동, 격막 파편에 의한 유동 교란 및 모델 손상, 다중 분사에 따른 연료 제트 미발달, 그리고 짧은 시험 시간이 이에 해당한다. 파악된 기술적 난제들을 해결한 이후, 개선된 결과를 쉐도우그래프 이미지 및 저압관 끝단 전압력 측정 결과를 통해 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1154-1160
• /
• 2000

This paper reports the development of a special impact fatigue test machine for high pressure vessels. The targeted vessels are subjected to shock pressures equivalent of explosions. This severe loading condition brings many difficulties to the design of test machine. Unfortunately, there are very rare such test machine in the world, and more worse, the machine is not opened and sold.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1038-1042
• /
• 2007

The factors influencing the floor impact sound insulation include floor finishing materials, shock absorbing floors (slabs included), and ceiling structures. The ceilings of the apartment houses, currently built in Korea, are set up with lower parts of slabs and paper finishing, or with double floors for protecting against floor impact sounds in order to improve the sound insulating performance. The most common the method of ceiling structure construction consists of 'wood boarded frames + Gypsum boards + ceiling papers', which is called the wood boarded frame method. This study aimed to measures and evaluates floor impact sound insulation by which the ceiling space are widened according to suppression system is added in apartment house ceiling structure.

• 대한기계학회논문집A
• /
• 제29권9호
• /
• pp.1191-1198
• /
• 2005

This paper is concerned with the numerical investigation of the landing impact characteristics of sport shoes to the landing mode. In most court sport activities, jumping and landing are fundamental motions, and the landing motion is largely composed of forefoot and rearfoot landing modes. Since the landing impact may, but frequently, lead to unexpected injuries of players, the investigation of its characteristics and the sport shoes design for reducing it are of a great importance. To investigate the landing impact characteristics to the landing mode, we construct a shoes-leg coupled model and carry out the numerical simulation by an explicit finite element method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.871-874
• /
• 2002

Many malfunctions take place in container crane spreader due to impact. So we designed a 2DOF hydraulic impact absorbing system with multi-step damping coefficient and studied the effect of orifice's interval and damping coefficient. The damping coefficient of upper piston was found to be 180 N.s/m, and the orifice's interval to be 9mm, the max reaction force and the average reaction force might be lowest. Compared with a general 2-DOF impact absorbing system, the max reaction force reduced by 46%., and average reaction force reduced by 5%.

• Geomechanics and Engineering
• /
• 제9권2호
• /
• pp.207-218
• /
• 2015

In this paper, forming of fully clamped circular plate by using low velocity impact system has been investigated. This system consists of liquid shock tube and gravity drop hammer. A series of test on mild steel and aluminum alloy plates has been done. The effect of varying both impact load and the plate material on the deflection are described. This paper also presents a simple model to prediction of mid-point deflection of circular plate by using input-output experimental data. In this way, singular value decomposition (SVD) method is used in conjunction with dimensionless number incorporated in such complex process. The results of obtained model have very good agreement with experimental data and it provides a way of studying and understanding the plastic deformation of impact loads.