• Journal of Electrical Engineering and Technology
• /
• 제4권2호
• /
• pp.219-228
• /
• 2009

The growing application and the numerous qualities of induction motors (1M) in industrial processes that require high security and reliability levels has led to the development of multiple methods for early fault detection. However, various faults can occur, such as stator short-circuits and rotor failures. Traditionally the diagnosis machine is done through a sinusoidal power supply, in the present paper we study experimentally the effects of the rotor failures, such as broken rotor bars in function of the ac supplying, the load and show the impact of the converter from diagnosis of the machine. The technique diagnosis used is based on the spectral analysis of stator currents or stator voltages respectively according to the types of induction motor ac supplying. So, four different ac supplying are considered: ${\odot}$ the IM is directly by the balanced three-phase network voltage source, ${\odot}$ the IM is fed by a sinusoidal current source given the controlled by hysteresis, ${\odot}$ the IM is fed (in open loop) by a scalar control imposing through ratio V/f=constant, ${\odot}$ the IM is controlled through a vector control using space vector pulse width modulation (SVPWM) technique inverter with an outer speed loop.

• The Journal of Korean Physical Therapy
• /
• 제29권1호
• /
• pp.1-6
• /
• 2017

Purpose: This study aimed to demonstrate reduction in stroke symptoms by analyzing the changes in respiratory function and activities of daily living (ADL) after respiratory muscle strengthening exercise in patients who had a stroke and thereby, propose an efficient exercise method. Methods: Twenty patients with hemiplegic stroke were divided into two groups, with 10 patients in each. The control group (CG) received the traditional exercise therapy, and the experimental group (EG) received the traditional exercise therapy combined with expiratory muscle strengthening training. The training continued for 6 weeks, 5 days a week. Forced vital capacity (FVC) and forced expiratory volume at 1 second (FEV1) were measured with a spirometer, $SpO_2$ was measured with a pulse oximeter, and ADL were assessed by using the modified Barthel index (MBI). A paired t test was applied to compare the differences before and after the intervention, and an independent t test was used to compare the differences between the groups. The level of statistical significance was set as ${\alpha}=0.05$. Results: The changes in the FVC and FEV1 values within the group showed significant differences only in the EG (p<0.01). The between-group difference was statistically significant only for FVC and FEV1 in the EG (p<0.01). The changes in $SpO_2$ and MBI within the group showed significant differences only in the EG and CG (p<0.01). Between-group differences were statistically significant only for $SpO_2$ and MBI in the EG (p<0.05). Conclusion: The interventions with active patient involvement and combined breathing exercises had a positive impact on all the functions investigated in this study.

• 한국식생활문화학회지
• /
• 제20권4호
• /
• pp.487-497
• /
• 2005

War against Japanese(1592-1599) and war against Manchurian(1636-1637), which had been occurred in Korean Peninsula throughout the history, and frequent trade with foreign countries since $18^{th}$ century have led to a distribution of foreign food into Korea. Several examples for this include tomato, apple, watermelon, maize, pea, cowpea, peanut, potato from China and red pepper, pumpkin, and sweet potato from Japan. Since these foods had been brought into Korea, they have been cultivated suitable for Korea's climate and land. Foreign foods with a few exceptions tend to have high calories. For instance, along with potato and sweet potato, pumpkin is considered a high-calorie food containing lots of starches as it becomes ripening. This helped a wide spread of the foreign foods across the nation where intake of high-calorie foods was critical for Korean people's nutrition at that time. Among those foods introduced from foreign countries, red pepper had a greatest impact on the dietary life-style of Chosun Dynasty. The use of red pepper has been greatly expanded from main ingredient to seasoning and garnishing in various forms of red pepper such as red pepper paste, red pepper powder, and thick soy paste mixed with red pepper. Red pepper was made eating habits is hot besides dye red colored to traditional food, because steaming and boiling is frequently cook method, fermentation food also food color is achromatic therefore food color is and mixture with red pepper, picked fish and chinese cabbage new kimchi culture came into being.

• 한국항공우주학회지
• /
• 제38권3호
• /
• pp.294-299
• /
• 2010

비상위치송수신장치(ELT)는 항공기 추락 시 조난 신호를 송출하는 장비이다. 유용한 장비이지만 항공기 추락과 경착륙에 대한 오판으로 인하여 잘못된 조난신호를 송출하기도 한다. 이러한 문제점은 현재 사용되고 있는 기계식 G-스위치의 부정확성에 그 원인이 있다. ELT의 성능 개선을 위하여 기계식 G-스위치를 MEMS 가속도계로 대체한 ELT 시스템을 개발하였다. ELT 시스템은 가속도 정보 수집/분석 시스템과 추락 판단 프로그램, 추락 상황에서 위치 정보를 제공하기 위한 GPS 수신 시스템으로 구성되어 있다. 또한, ELT 시스템을 검증하기 위한 자유 낙하 실험대를 제작하였다. 자유 낙하 실험대는 추락과 경착륙에 해당하는 충격 가속도와 충격 유지 시간을 모사할 수 있도록 설계하였다. 자유 낙하 실험대를 이용하여 개발한 ELT 시스템이 정확히 작동함을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제18권5호
• /
• pp.558-563
• /
• 2008

Vibration/shock affects biggest taking a train subtraction of vehicle and durability decline. Therefore, absorber is used for vibration/shock isolation and various qualities of the material and design are applied to isolation. This paper proposes vibration/shock absorber that applies 'Disc' spring. Through comparison with 'Disc' spring that has nonlinearity and coil spring that is having linearity, see effect that nonlinearity of isolation gets in vibration/shock Isolation. Coil spring and 'Disc' spring are non-linear numerical analysis and simulation through theory for this, get and investigate comparison result through an experiment finally. Expressed and formulated shock through 'Runge-Kutta' method/impact response to nonlinear-vibration-equation of 1 degree of freedom for numerical analysis. Double half sine pulse of excitation used and analyzed result through spectrum response analysis here. Response of disc spring is compared to response of coil spring by changing $h_o/t$ ratio with computer simulation and the usage of disc spring is increased through analysis of effect of design factors. The purpose of this paper is that the shock response of disc spring is calculated through numerical simulation and to design the optimal absorber under the limited condition. And then, the isolation effect was analyzed through the shock test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.990-993
• /
• 2008

Vibration/shock affects biggest taking a train subtraction of vehicle and durability decline. Therefore, absorber is used for vibration/shock isolation and various qualities of the material and design are applied to isolation. This paper proposes vibration/shock absorber that applies 'Disc'spring. Through comparison with 'Disc' spring that has nonlinearity and coil spring that is having linearity, see effect that nonlinearity of isolation gets in vibration/shock isolation. Coil spring and 'Disc' spring are non-linear numerical analysis and simulation through theory for this, get and investigate comparison result through an experiment finally. Expressed and formulated shock through 'Runge-Kutta' method/impact response to nonlinear-vibration-equation of 1 degree of freedom for numerical analysis. Double half sine pulse of excitation used and analyzed result through spectrum response analysis here. Response of disc spring is compared to response of coil spring by changing ho/t ratio with computer simulation and the usage of disc spring is increased through analysis of effect of design factors. The purpose of this paper is that the shock response of disc spring is calculated through numerical simulation and to design the optimal absorber under the limited condition. And then, the isolation effect was analyzed through the shock test.

• 한국임상약학회지
• /
• 제10권3호
• /
• pp.107-110
• /
• 2000

Theophylline and $\beta$-adrenergic agonists are frequently used together in patients with respiratory diseases. However the clinical impact of $\beta_2$-adrenergic agonists on the blood concentration of theophylline is not fully evaluated. Formoterol, a newly available oral ${\beta}_2$-adrenergic agonist is frequently used in pediatric respiratory patients. The objective of this study was to investigate the effect of oral formoterol on theophylline's blood concentration. Randomized prospective study was conducted. Twenty-four children were enrolled on the study. Their age ranged 2 to 73 months (mean 35.8 months). Theophylline group (12 patients) received 10 mg/kg/day of for theophylline orally. Theophylline/formoterol group (12 patients) received 10 mg/kg/day of theophylline and $4\;{\mu}g/kg/day$ of formoterol orally. All medications were administered at least for 5 days starting on admission day. Theophylline's trough concentrations were obtained on days 3 and day 5. Pulse rates were recorded before the study medications were given on admission, and days 3 and day 5. Statistical significance was calculated by two-tailed Student's t-test. Theophylline's levels in children given theophylline and formoterol together were lower an those given theophylline alone ($6.38\pm0.90\;{\mu}g/ml\;vs\;7.43\pm0.77\;{\mu}g/ml$ on day 3(p<0.05), $5.62\pm0.56\;{\mu}g/ml\;vs.\;6.78\pm0.61\;{\mu}g/ml$ on day 5 (p<0.05)). In both groups, theophylline's trough concentration on day 5 were lower than day 3. There was no significant side effects in both groups. In conclusion, the new ${\beta}_2$ selective adrenergic agonist formoterol reduced serum theophylline levels in children with respiratory diseases. Further investigation is needed to clarify the long term effect of this drug interaction.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.702-713
• /
• 2018

Power loss reduction and total harmonic distortion(THD) minimization are two important goals of improving three-level inverters. In this paper, an optimized pulse width modulation (PWM) strategy that can reduce switching losses and balance the neutral point with an optional THD of three-level neutral-point-clamped inverters is proposed. An analysis of the two-level discontinuous PWM (DPWM) strategy indicates that the optimal goal of the proposed PWM strategy is to reduce switching losses to a minimum without increasing the THD compared to that of traditional SVPWMs. Thus, the analysis of the two-level DPWM strategy is introduced. Through the rational allocation of the zero vector, only two-phase switching devices are active in each sector, and their switching losses can be reduced by one-third compared with those of traditional PWM strategies. A detailed analysis of the impact of small vectors, which correspond to different zero vectors, on the neutral-point potential is conducted, and a hysteresis control method is proposed to balance the neutral point. This method is simple, does not judge the direction of midpoint currents, and can adjust the switching times of devices and the fluctuation of the neutral-point potential by changing the hysteresis loop width. Simulation and experimental results prove the effectiveness and feasibility of the proposed strategy.

• 대기
• /
• 제19권4호
• /
• pp.319-329
• /
• 2009

The intensive dust observation experiment has been performed at Korea Global Atmosphere Watch Center (KGAW) in Anmyeon, Korea during each spring season from 2007 to 2009. Downward and upward hyper-spectral spectrums over the dust condition were measured to understand the hyper-spectral properties of Asian dust using both ground-based Fourier Transform Infrared Spectroscopy (FT-IR) and space-borne AIRS/Aqua. To understand the impact of the Asian dust, a Line-by-Line radiative transfer model runs to calculate the high resolution infrared spectrum over the wave number range of $500-500cm^{-1}$. Furthermore, the radiosonde, a $PM_{10}$ Sampler, a Micro Pulse Lidar (MPL), and an Aerodynamic Particle Sizer (APS) are used to understand the vertical profile of temperature and humidity and the properties of Asian dust like concentration, altitude of dust layer, and size distribution. In this study, we found the Asian dust distributed from surface up to 3-4 km and volume concentration is increased at the size range between 2 and $8{\mu}m$ The observed dust spectrums are larger than the calculated clear sky spectrums by 15~60K for downward and lower by around 2~6K for upward in the wave number range of $800-1200cm^{-1}$. For the characteristics of the spectrum during the Asian dust, the downward spectrum is revealed a positive slope for $800-1000cm^{-1}$ region and negative slope over $1100-1200cm^{-1}$ region. In the upward spectrum, slopes are opposed to the downward one. It is inferred that the difference between measured and calculated spectrum is mostly due to the contribution of emission and/or absorption of the dust particles by the aerosol amount, size distribution, altitude, and composition.

• 한국정밀공학회지
• /
• 제27권10호
• /
• pp.29-33
• /
• 2010

UV laser micromachining of metallic materials has been used in microelectronic and other industries. This paper shows on experimental investigation of micromachining of copper using a 355nm UV laser with 50ns pulse duration. A finite element model with high strain rate effect is especially suggested to investigate the phenomena which are only dominated by mechanically pressure impact in disregard of thermally heat transfer. In order to consider the strain rate effect, Cowper-Symonds model was used. To analyze the dynamic deformation during a very short processing time, which is nearly about several tens nanoseconds, a commercial Finite Element Analysis (FEA) code, LS-DYNA 3D, was employed for the computational simulation of the UV laser micro machining behavior for thin copper material. From these computational results, depth of the dent (from one to six pulsed) were observed and compared with previous experimental results. This will help us to understand interaction between UV laser beam and material.