• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.851-856
• /
• 2002

In this study, the property against low velocity of the compesite material, which will be applied a rail vehicle, is shown using experiment and a finite element code. The property can be denoted the resistance of impact force, which is defined by maximum impact force over damage area. A damage propagation model is necessary to estimate accurately the impact property of a composite material through FEM code.

• 한국주조공학회지
• /
• 제36권6호
• /
• pp.187-194
• /
• 2016

The effects of scrap content on the impact and fatigue properties were investigated in AC4A alloy. The impact absorbed energy of as-cast specimens were 3.61, 3.56, 3.47, and 3.08 Joules, respectively, when scrap contents of the specimens were 0, 20, 35, and 50%. And, the corresponding energy levels of the T6 heat-treated condition were 3.66, 3.48, 3.25, and 2.96 Joule. In the same way, the fatigue strength values of the as-cast specimens were 53.2, 52.0, 48.4, and 43.8MPa, respectively, and the corresponding fatigue strengths of the T6 heat-treatment specimens were 85.4, 75.7, 60.6, and 51.2 MPa. Impact absorbed energy and fatigue strength decreased as scrap content of the specimen increased. It is assumed that impact absorbed energy decreased owing to the presence of oxide films, which act as branches of 2nd cracks; fatigue strength also decreased with decreased deflection of the fatigue crack path as the scrap content of the specimens increased.

• Computers and Concrete
• /
• 제9권4호
• /
• pp.293-310
• /
• 2012

This paper discusses a new constitutive model called the high-rate brittle microplane (HRBM) model and also presents the details of a new software package called the Virtual Materials Laboratory (VML). The VML software package was developed to address the challenges of fitting complex material models such as the HRBM model to material property test data and to study the behavior of those models under a wide variety of stress- and strain-paths. VML employs Continuous Evolutionary Algorithms (CEA) in conjunction with gradient search methods to create automatic fitting algorithms to determine constitutive model parameters. The VML code is used to fit the new HRBM model to a well-characterized conventional strength concrete called WES5000. Finally, the ability of the new HRBM model to provide high-fidelity simulations of material property experiments is demonstrated by comparing HRBM simulations to laboratory material property data.

• The Journal of Asian Finance, Economics and Business
• /
• 제4권3호
• /
• pp.57-73
• /
• 2017

In the current competitive marketplace of real estate business, tenant satisfaction measurement is one of the important indicators to monitor competitiveness in industrial property development. It has become an industry standard to measure tenant satisfaction, commonly called customer satisfaction. Customer satisfaction has become the widely used metric to manage customer loyalty (Keiningham, Gupta, Aksoy, & Buoye, 2014). The aim of this research is to determine the impact of property management services on tenants' satisfaction with the three identified variables i.e. facility management, perceived quality and lease management. Structural equation modeling (SEM) is applied to build constructs and test the hypotheses with the collected survey samples. Of the three variables, facility management is the most influential factor that leads to tenant satisfaction with industrial buildings. Next, perceived quality is another important factor that contributes to tenants' pleasure. Compared with these two, lease management fares worse, having the least extensive effect on tenant satisfaction, and could be disregarded. The ultimate impact of tenant satisfaction is about tenant retention and recommendation. The overall findings of this research will potentially help real estate developers to develop a better property management system, leasing program and tenant retention strategy.

• Journal of Welding and Joining
• /
• 제4권3호
• /
• pp.58-71
• /
• 1986

Mechanical and corrosion property of duplex stainless steel weldments made by the GTAW and SMAW process were studied. Fracture toughness, general and local corrosion resistance of GTAW and SMAW weldments were evaluated in terms of Charpy V notch impact test, anodic polarization diagram, pitting corrosion rate, respectively. SMA weld metal showed much lower impact toughness and higher ductile-brittle transition temperature than GTA weld metal. Fractographic and EDX analysis on fracture surface of SMA weld metal demonstrated the existence of (Si, Ti), oxide in large amounts. Potentiodynamic anodic polarization diagram of GMA weld metal showed much lower passive current density than SMA weld metal in 4% $H_2/SO_4$ solution. And pitting corrosion rate test showed the same tendency. Relating the microstructure, chemistry and property, it can be concluded that GTA weld metal gives better toughness due to lower oxygen content, i.e. lower inclusion content, and better corrosion resistance due to higher Pitting Index(PI) than SMA weld metal.

• STI Policy Review
• /
• 제4권2호
• /
• pp.1-18
• /
• 2013

As the value and role of intellectual property increases in our knowledge-based economy, countries around the world have exerted various efforts to secure, utilize, and protect their intellectual property. The present study diagnoses the level of IP infrastructure of major OECD countries and analyzes their characteristics and impact. According to the diagnosis, the US, Switzerland, and Germany form a leading group followed by the mid-level countries of Korea, Ireland, Australia, and France, with Spain and Italy in the bottom group. In contrast to Korea's competitiveness in S&T and R&D infrastructures, its competitiveness in IP infrastructure is lower than the OECD average. This is thought to be due to Korea's IP infrastructure being hastily formed under the influence of international pressures rather than having been gradually built up by internal needs. A TFP analysis of the impact of IP infrastructure on economic growth shows IP infrastructure positively influences economic growth. Though this analysis is limited due to inability to secure sufficient data and indicators, it is a useful guide for understanding the nature and key characteristics of IP infrastructure.

• 마이크로전자및패키징학회지
• /
• 제18권2호
• /
• pp.49-55
• /
• 2011

전자기기에서의 고장 중 대부분은 작동 중 발생하는 열과 충격에 기인한다. 이 열과 충격은 PCB(Printed Board) 부품의 접합부 계면에 균열을 야기 시키고, 이 균열은 금속간 화합물(Intermetallic Compound: IMC)의 형성과 밀접한 관계를 가진다. 본 연구에서는 Sn-Ag-Cu계의 Ag함량을 변화한 Sn-1.0Ag-0.5Cu와 Sn-1.2Ag-0.5Cu 및 Sn-3.0Ag-0.5Cu의 3가지 조성의 솔더로 접합한 소재를 대상으로 1000시간 까지 등온시효(Isothermal Aging) 하였다. 등온시효 동 안 솔더(Solder)의 계면에 발생하는 IMC(Intermetallic Compound) 성장이 관찰되었으며, solder 접합부의 기계적 특성은 굽힘충격 시험법을 이용하여 평가되었다. 그 결과 시효처리 전에는 Ag 함량이 낮은 solder의 굽힘충격 특성이 우수하게 나타났으나, 시효처리 후에는 반대의 결과를 나타내었다. 이 결과는 IMC layer 주변에 생성된 미세한 $Ag_3Sn$ 및 조대한 $Cu_6Sn_5$와 관련되어, 미세한 $Ag_3Sn$이 충격을 완화한 것으로 나타나 이에 따라 굽힘충격 특성에 차이가 나타남을 알 수 있었다.

• 국토계획
• /
• 제54권1호
• /
• pp.148-158
• /
• 2019

The purpose of this study is to analyze the impact of earthquake on apartment prices. Many studies have been done analyzing the relationship between natural hazards and residential property prices. Most studies have shown that natural hazards have an negative effect on residential property prices, but some studies have shown that natural hazards have an positive effect on residential property prices. These conflicting analysis result from the lack of considering natural hazard frequency at the analysis site. According to literature reviews risk avoidance tendency are already inherent in prices, thus distorting the relationship between natural hazards and prices. That is, in order to analyze the impact of natural hazards on residential property prices, analysis must be carried out in areas where there has not suffered natural hazard for a long time or where there has been no damage before. Nevertheless, previous studies analyzed areas frequently affected by natural hazards. Gyeongju has been recognized as a safe area from earthquake in the past, an 5.8 magnitude earthquake occurred in September 2016. Analysis results focusing on Gyeongju Earthquake case has shown that the earthquake has affected decrease of apartment prices in hazardous areas, and after earthquake apartment prices have risen over time.

• 동력기계공학회지
• /
• 제15권1호
• /
• pp.45-50
• /
• 2011

The effect of Mn and Ti contents in filler wire on the microstructure and mechanical property of weld metal has been investigated after hybrid welding with ultra fine grained (UFG) steel. The microstructure and distribution of alloy compositions at the top region of weld zone were quite different with those at the bottom region after hybrid welding. The bottom region of weld zone contained higher Mn and Ti contents, and consequently the hardness of bottom region was higher than that of top region. With the increase of Mn and Ti contents in filler wire, the volume percent of acicular ferrite in weld metal decreased, and the weld zone showed higher hardness and better impact property.

• 한국주조공학회지
• /
• 제35권4호
• /
• pp.88-98
• /
• 2015

The effects of quenching and tempering temperatures on the tensile, impact and corrosion properties of A487 alloy cast with different C contents of 0.16, 0.19 to 0.23 wt.% were examined. The impact tests were conducted at $25^{\circ}C$ and $-60^{\circ}C$ and the immersion test was performed using 3.5% NaCl solution for 14 days. The quenching temperature affected the mechanical properties of A487 alloy cast, while the magnitude of change varied depending on the C content. The increase in tempering temperature showed the typical trend of decreasing tensile strength and increasing impact properties. The change in quenching and tempering temperature in this study did not affect the corrosion properties of A487 alloy significantly. The change in mechanical and corrosion properties of A487 with different C contents was discussed based on the microstructural and fractographic observation.