• Journal of the Korea Society of Computer and Information
• /
• v.26 no.12
• /
• pp.11-18
• /
• 2021

This paper shows the applicability of deep learning algorithm in predicting target position and getting correction value of impact point in order to improve the accuracy of naval gun firing. Predicting target position, the proposed model using LSTM model and RN structure is expected to be more accurate than existing method using kalman filter. Getting correction value of impact point, the another proposed model suggests a reinforcement model that manages factors which is related in ballistic calculation as data set, and learns using the data set. The model is expected to reduce error of naval gun firing. Combining two models, a ballistic calculation model for improving accuracy of naval gun firing based on deep learning algorithm was designed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.9
• /
• pp.839-847
• /
• 2011

This paper proposes a new guidance law for increasing the lethality of munitions. The well known PNG (Proportional Navigation Guidance) is inadequate for the munitions because of some weaknesses. Even if the munition does not have the impact point error, the acceleration command is non zero because the line-of-sight changes at all times in flight. Therefore, we use a difference between a target and an impact point. This proposed guidance law is similar to PNG in the form, but this guidance law concentrates a correction rate of flight path angle instead of the LOS (Line of Sight) rate. The correction of flight path angle is defined as the amount of impact point error. This impact point error can be calculated by neural networks rapidly. Finally, we show that the simulation results prove the suitability of this law.

• International Journal of Knowledge Content Development & Technology
• /
• v.5 no.2
• /
• pp.75-101
• /
• 2015

In this paper, we investigate the notion of error correction memory applied to technical texts. The main purpose is to introduce flexibility and context sensitivity in the detection and the correction of errors related to Constrained Natural Language (CNL) principles. This is realized by enhancing error detection paired with relatively generic correction patterns and contextual correction recommendations. Patterns are induced from previous corrections made by technical writers for a given type of text. The impact of such an error correction memory is also investigated from the point of view of the technical writer's cognitive activity. The notion of error correction memory is developed within the framework of the LELIE project an experiment is carried out on the case of fuzzy lexical items and negation, which are both major problems in technical writing. Language processing and knowledge representation aspects are developed together with evaluation directions.

• Korean Journal of Remote Sensing
• /
• v.33 no.4
• /
• pp.445-454
• /
• 2017

The performance of spatial downscaling models depends on the quality of input coarse scale products. Thus, the impact of intrinsic errors contained in coarse scale satellite products on predictive performance should be properly assessed in parallel with the development of advanced downscaling models. Such an assessment is the main objective of this paper. Based on a synthetic satellite precipitation product at a coarse scale generated from rain gauge data, two synthetic precipitation products with different amounts of error were generated and used as inputs for spatial downscaling. Geographically weighted regression, which typically has very high explanatory power, was selected as the trend component estimation model, and area-to-point kriging was applied for residual correction in the spatial downscaling experiment. When errors in the coarse scale product were greater, the trend component estimates were much more susceptible to errors. But residual correction could reduce the impact of the erroneous trend component estimates, which improved the predictive performance. However, residual correction could not improve predictive performance significantly when substantial errors were contained in the input coarse scale data. Therefore, the development of advanced spatial downscaling models should be focused on correction of intrinsic errors in the coarse scale satellite product if a priori error information could be available, rather than on the application of advanced regression models with high explanatory power.

• Journal of Environmental Impact Assessment
• /
• v.14 no.5
• /
• pp.247-254
• /
• 2005

Road traffic noise has increasing broader effects on urban areas as well as rural areas because of rapidly increasing traffic volume and newly-constructed roads. 10 sites in building development areas were selected and the noise level were measured by the apartment floors and by the various block plans of apartment complex. Analysis result, about correction factor, in the case of right angle arrangement, apply - 2.5dB(A). In the case of apartment house correlation of each floor apply 1st floors 0dB(A), 2st floors 1.2dB(A), 3st floors 2.1dB(A), 4st floors 2.6dB(A), 5st floors 2.7dB(A), 6st floors 2.7dB(A), 7st floors 2.4dB(A), 8st floors 2.0dB(A), 9st floors 1.6dB(A), 10st floors 1.1dB(A), 13st floors 0.2dB(A), 15st floors 0.5dB(A). The level of road traffic noise in the arrangement construction of right angle was about 3.0dB(A) at N-4 point and 2.1dB(A) at N-6 point lower than that of a plan figure, respectively. The results suggested that application of correction coefficient obtained by the apartment floor and by the arrangement construction can be improved in road traffic noise. The results suggested that application of correction coefficient obtained by the apartment floor and by the arrangement construction can be improved in road traffic noise.

• Journal of Information Management
• /
• v.21 no.1
• /
• pp.76-92
• /
• 1990

This paper discusses automatic spelling correction in a point of view bibliographic Data Base production and information retrieval. Types of commonly detected spelling errors and impact of spelling errors in bibliographic data bases are described here. Document normalization, spelling verification, spelling correction and user interface for general construction of automatic spelling correction systems are described.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.231-235
• /
• 2013

Lens distortions have a significant impact on captured or projected image geometry. This paper proposes a lens distortion correction with gradient components for wide-angle lenses. In most cases, distortion coefficients are estimated using a distortion model by point correspondences. Corrected images using only point correspondences can be compensated excessively, therefore, producing bended lines into the opposite direction near the corners. To curtail these phenomena, we propose to adopt the gradient components in addition to positions to obtain the distortion coefficients. We verified the improved accuracy and the straightness of the proposed method through experimentation.

• Journal of Welding and Joining
• /
• v.11 no.1
• /
• pp.42-51
• /
• 1993

In this study, investigations were conducted in calculating parameters of elastic-plastic fracture mechanics using single specimen. The validity of these testing methods was judged by the confirmation of multiple specimen method of stop block test. The results were as follows: In order to measure a fracture toughness using the instrumented impact test, two general requirement must be considered; One, setting up proper impact velocity considered the effect of loading and the other, the necessity of low blow test for obtaining true energy by the compliance correction. It was possible to detect a crack initiation point by calculating the compliance changing rate from a load-defection curve. Criterion of a stable crack growth, $T_{mat}$ could be estimated by using key-curve method for a base metal. and combining Kaiser's rebound compliance with Paris-Hutchison's $T_{appl}$ equation for the brittled zone of welding heat affected.at affected.d.

• Journal of Environmental Impact Assessment
• /
• v.15 no.2
• /
• pp.93-100
• /
• 2006

In general, the verification to prediction formula in a national road and the main street of a town has been used recklessly in Korea. Therefore we investigated the validity of an existing prediction formula (NIER(87, 99), TR-Noise, KLC(2002)) with correction relationship which was based on both the prediction formular from apartment complex in the field and height 1.5m from the surface level. On the results of measuring the noise level form an isolated distance, the noise level showed that it was 4.5~5.5dB(A) by reason of becoming 2 folder far from a source. From the distribution of noise level measured by the apartment floors, the measurement point (1st floor) was 58.7~71.4dB(A) at its lowest level and the middle floors (3, 5, 7 and 10) were the highest distribution of noise level. From the analysis results on the application validity to an existing prediction formular (NIER(87, 99), TR-Noise, KLC(2002)) in the height 1.5m, the correction coefficients were 0.95~0.96 and the measured values were reasonably close to the predicted values, indicating the validity and adequacy of the predicted models. KLC(2002) model was found accurate within 3dB(A) with 36 data out of the total 42 data, showing the most accuracy among the predict models. However, the developed models have to improve the accuracy with a various of factors.

• Progress in Medical Physics
• /
• v.15 no.3
• /
• pp.149-155
• /
• 2004

Purpose: To investigate the effects of tissue inhomogeneity corrections on the dose delivered to prostate cancer patients treated with Intensity-Modulated Radiation Therapy (IMRT). Methods and Materials: For five prostate cancer patients, IMRT treatment plans were generated using 6 MV or 10 MV X-rays. In each plan, seven equally spaced ports of photon beams were directed to the isocenter, neglecting the tissue heterogeneity in the body. The dose at the isocenter, mean dose, maximum dose, minimum dose and volume that received more than 95% of the isocenter dose in the planning target volume ( $V_{p>95%}$) were measured. The maximum doses to the rectum and the bladder, and the volumes that received more than 50, 75 and 90% of the prescribed dose were measured. Treatment plans were then recomputed using tissue inhomogeneity correction maintaining the intensity profiles and monitor units of each port. The prescription point dose and other dosimetric parameters were remeasured. Results: The inhomogeneity correction reduced the prescription point dose by an average 4.9 and 4.0% with 6 and 10 MV X-rays, respectively. The average reductions of the $V_{p>95%}$ were 0.8 and 0.9% with the 6 and 10 MV X-rays, respectively. The mean doses in the PTV were reduced by an average of 4.2 and 3.4% with the 6 and 10 MV X-rays, respectively. The irradiated volume parameters in the rectum and bladder were less decreased; less than 2.1 % (1.2%) of the reduction in the rectum (bladder). The average reductions in the mean dose were 1.0 and 0.5% in the rectum and bladder, respectively. Conclusions: Neglect of tissue inhomogeneity in the IMRT treatment of prostate cancer gives rise to a notable overestimation of the dose delivered to the target, whereas the impact of tissue inhomogeneity correction to the surrounding critical organs is less significant.