• The Journal of the Korean dental association
• /
• v.56 no.6
• /
• pp.324-332
• /
• 2018

A mouthguard is a protective device normally worn on the upper jaw, to reduce injures to the teeth, jaws and surrounding soft tissues. It has a definite role in preventing injuries to the teeth and face and for this reason it is strongly recommended for all sporting activities where there is a risk of trauma to the teeth and associated structures. Mouthguards can be effective in reducing impact force to the teeth, and attributed to enhancement of postural control and muscle performance during teeth clenching. Although there is evidence that mouthguards reducing impact force to the teeth, and prevent orofacial trauma occurrence during sport practice, the influence of this device on athletic performance has not been systematically quantified. Nevertheless, wearing a dentally fitted laminated mouthguard of at least 3 mm thickness can be strongly recommended during sport practice.

• Structural Engineering and Mechanics
• /
• v.13 no.2
• /
• pp.171-186
• /
• 2002

Static and dynamic penetration tests of reinforced concrete (RC) slab specimens are described and discussed. The experimental study was aimed at a better understanding of mechanisms that are involved in dynamic penetration, through their identification in static tests, and by establishing their relative influence in similar dynamic cases. The RC specimens were $80{\times}80-cm$ square plates, and they were made of 30 MPa concrete. The non-deforming steel penetrator was a 50-mm diameter steel rod with a conical nose of 1.5 aspect ratio. Impact penetration tests were carried out with an air gun, which launched the projectiles at velocities of up to 300 m/sec. The static tests were conducted using a closed loop displacement control actuator, where the penetrator was pushed at a constant rate of displacement into the specimen. The static tests reveal important mechanisms that govern the penetration process and therefore contribute to a better understanding of RC barriers resistance to non-deforming projectiles impact.

• KDI Journal of Economic Policy
• /
• v.43 no.1
• /
• pp.29-52
• /
• 2021

The purpose of this paper is to measure the impact of the recent Korea-Japan trade dispute on the Korean economy using supply-driven input-output analysis. In July 2019, Japan announced the decision to tighten the export control of three materials which are indispensable in the manufacturing of semiconductors and electronic display panels. Japan's decision directly affects production in Korea's semiconductor and display sectors and is hence not a demand shock. For this reason, a standard demand-driven input-output analysis is not valid despite the fact that it can still be applied. The impact of Japan's decision on Korea's aggregate and individual sectors' gross output, GDP and employment were computed using both methods.

• Asian Journal for Public Opinion Research
• /
• v.10 no.3
• /
• pp.230-253
• /
• 2022

Based on Goffman's dramaturgical theory and self-objectification framework, this study examined: 1) Chinese female's WeChat self-presentation, 2) the impact of WeChat usage on female self-objectification, and 3) the impact of self-objectification on WeChat self-presentation tactics. An online survey was conducted. The main findings include: 1) most of the participants chose to beautify their pictures and videos before they posted them, 2) the respondents attached higher importance to appearance-based body attributes than competence-based ones, 3) the most frequently applied self-presentation tactic was ingratiation, 4) WeChat usage was not a predictor of Chinese women's self-objectification, and, 5) along with extroversion, self-objectification had an impact on ingratiation, supplication, self-promotion, and exemplification. Meanwhile, use of the electronic curtain and audience sifting to control who can see a post and for how long demonstrated the empowerment of the users when they conduct self-presentation.

• Advances in concrete construction
• /
• v.15 no.4
• /
• pp.287-301
• /
• 2023

Hockey games attracts many fans around the world. This game requires a specific type of ball and a stick for controlling the motion and trace of the ball. This control of motion involves hitting the ball which is a direct intensive dynamic loading. The impact load transferred directly to the hand of the player and in the professional player may cause long term medical problems. Therefore, dynamic motion of the stick should be understood. In the current study, we analyze the dynamic motion of a hockey stick under impact loading from a hockey ball. In doing so, the stick geometry is simplified as a beam structure and quasi-2D relations of displacement is applied along with classical linear elasticity theory for isotropic materials. The governing equations and natural boundary condition are extracted using Hamilton's principle. The final equations in terms of displacement components are solved using Galerkin's numerical method. The results are presented using indentation and contact force values for variations of different parameters.

• Structural Engineering and Mechanics
• /
• v.18 no.3
• /
• pp.287-301
• /
• 2004

Structural acceleration regulation is a means of managing structural response energy and enhancing the performance of civil structures undergoing large seismic events. A quadratic output regulator that minimizes a measure including the total structural acceleration energy is developed and tested on a realistic non-linear, semi-active structural control case study. Suites of large scaled earthquakes are used to statistically quantify the impact of this type of control in terms of changes in the statistical distribution of controlled structural response. This approach includes the impulses due to control inputs and is shown to be more effective than a typical displacement focused control approach, by providing equivalent or better performance in terms of displacement and hysteretic energy reductions, while also significantly reducing peak story accelerations and the associated damage and occupant injury. For earthquake engineers faced with the dilemma of balancing displacement and acceleration demands this control approach can significantly reduce that concern, reducing structural damage and improving occupant safety.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.207-224
• /
• 2020

With the gradual improvement of China's residents' economic level, the continuous improvement of the holiday system, and the main purpose of relaxing mood and experiencing life, rural tourism has developed rapidly. In order to further achieve the goals of farmers' entrepreneurship, agricultural income increase, rural prosperity, and tourism management departments and tourism enterprises' management and operation objectives, this paper puts forward research hypotheses on the basis of relevant literature review and references. Based on the previous research results, this paper designs a questionnaire on Residents' rural tourism behavior intention, and uses SPSS23.0 to conduct correlation analysis and hypothesis test on the sample data, and draws the following conclusions: (1) rural tourism attitude, subjective norms, and perceived behavior control have a significant positive impact on rural tourism behavior intention; (2) policy system and resource conditions have a significant positive impact on rural tourism behavior intention; (3) policy system has a significant positive impact on subjective norms and perceived behavior control, and resource conditions have a significant positive impact on rural tourism attitude, subjective norms, and perceived behavior control.

• Food Science of Animal Resources
• /
• v.44 no.2
• /
• pp.430-442
• /
• 2024

This research aimed to assess the effect of collagenolytic proteases from Bacillus subtilis B13 and Bacillus siamensis S6 for tenderizing goat meat during wet aging. Collagenolytic proteases B13 and S6 were prepared at 5 U/mL of collagenolytic activity before injecting into goat meat with 10% (v/w) of initial weight. The control sample was injected with distilled water and used as a negative control. The injected meats were placed in vacuum-sealed bags and wet aged at 4℃ for 0, 3, 5, 7, 14, and 21 days. Thereafter, total aerobic count and physicochemical quality were elucidated. Both enzyme-treated samples from B13 and S6 aged for 5 days showed an acceptable microbial quality with lower than 5.7 Log CFU/g. These conditions produced the tender meats by the reduction in shear force accounting for 30% for B13 and 26% for S6 as compared to the control. Moreover, the enzyme-treated samples showed lower values of hardness, gumminess, and chewiness, with higher springiness and trichloroacetic acid-soluble peptides than the control (p<0.05). The detrimental impact on cooking loss and lipid oxidation was not found. Enzyme-injected meat had a lower cooking loss than the control (p<0.05) with no significant difference in lipid oxidation (p>0.05). Notably, meats treated with B13 and S6 were lower in CIE L^* value as compared to the control (p<0.05) with no significant impact on CIE a^* and CIE b^* (p>0.05). These results suggested that these two collagenolytic proteases could enhance the quality of goat meat in terms of tenderness and reduce the aging time for meat tenderization.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.51-62
• /
• 1999

The objective of this research is to develop paper sludge reinforced thermoplastic composites which incorporate the advantages of each component materials. The effects of paper sludge content(0, 10, 20, 30, 40----), mesh size(20~40, 60~80, less than 100mesh), and coupling agent(Epolene E-43 and Epolene G-3003) on the mechanical properties of paper sludge-polypropylene composites were investigated. Composite density increased with an increase in the paper sludge content. When paper sludge is incorporated into a polypropylene matrix, the flexural properties of the composite increase significantly with an increase in the paper sludge mixing ratio. Especially, flexural modulus was improved with increasing paper sludge content. The flexural strength of composites was improved, but flexural modulus reduced somewhat with decreasing paper sludge particle size. The flexural properties of paper sludge-polypropylene composites were improved by using coupling agents to enhance the bonding between reinforcing filler and matrix. Use of the epolene E-43 and G-3003 resulted in considerable improvement in the flexural strength over control specimens. The flexural strength of the G-3003 composite system is higher than that of the E-43 system. Generally, izod notched impact strength of paper sludge-polypropylene composite decreased slightly, whereas izod unnotched impact strength decreased significantly with increasing paper sludge contents. There was no effects of paper sludge particle size on impact strength of paper sludge-polypropylene composites. And izod unnotched impact strength of epolene E-43 composite system sharply decreased but that of G-3003 composite system was no tendency with increasing additive content.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.321-325
• /
• 2001

Servo drives with microcomputer control provide the possibility of using modem and sophisticated control algorithms. As an additional feature it is possible to implement parallel and/or redundant software and hardware structures to realise safe motion or similar security functions. Unfortunately microcomputer control also has some impact on the behaviour of servo drives. Control algorithm, cycle time, sensors and interface have to be perfectly synchronised. Special control schemes are necessary on the line side (power supply) to meet the actual requirements concerning EMC. This contribution presents experiences and results obtained from a modem digital drive system pointing out the influences of low and high accuracy position sensors and the interdependencies mentioned above.