• 제목/요약/키워드: Impact coefficients

검색결과 463건 처리시간 0.027초

ABSORBED INTERNAL DOSE CONVERSION COEFFICIENTS FOR DOMESTIC REFERENCE ANIMALS AND PLANT

  • Keum, Dong-Kwon;Jun, In;Lim, Kwang-Muk;Choi, Yong-Ho
    • Nuclear Engineering and Technology
    • /
    • 제42권1호
    • /
    • pp.89-96
    • /
    • 2010
  • This paper describes the methodology of calculating the internal dose conversion coefficient in order to assess the radiological impact on non-human species. This paper also presents the internal dose conversion coefficients of 25 radionuclides ($^3H,\;^7Be,\;^{14}C,\;^{40}K,\;^{51}Cr,\;^{54}Mn,\;^{59}Fe,\;^{58}Co,\;^{60}Co,\;^{65}Zn,\;^{90}Sr,\;^{95}Nb,\;^{99}Tc,\;^{106}Ru,\;^{129}I,\;^{131}I,\;^{136}Cs,\;^{137}Cs,\;^{140}Ba,\;^{140}La,\;^{144}Ce,\;^{238}U,\;^{239}Pu,\;^{240}Pu$) for domestic seven reference animals (roe deer, rat, frog, snake, Chinese minnow, bee, and earthworm) and one reference plant (pine tree). The uniform isotropic model was applied in order to calculate the internal dose conversion coefficients. The calculated internal dose conversion coefficient (${\mu}Gyd^{-1}$ per $Bqkg^{-1}$) ranged from $10^{-6}$ to $10^{-2}$ according to the type of radionuclides and organisms studied. It turns out that the internal does conversion coefficient was higher for alpha radionuclides, such as $^{238}U,\;^{239}Pu$, and $^{240}Pu$, and for large organisms, such as roe deer and pine tree. The internal dose conversion coefficients of $^{239}U,\;^{240}Pu,\;^{238}U,\;^{14}C,\;^3H$, and $^{99}Tc$ were independent of the organism.

Analysis of Inter-satellite Ranging Precision for Gravity Recovery in a Satellite Gravimetry Mission

  • Kim, Pureum;Park, Sang-Young;Kang, Dae-Eun;Lee, Youngro
    • Journal of Astronomy and Space Sciences
    • /
    • 제35권4호
    • /
    • pp.243-252
    • /
    • 2018
  • In a satellite gravimetry mission similar to GRACE, the precision of inter-satellite ranging is one of the key factors affecting the quality of gravity field recovery. In this paper, the impact of ranging precision on the accuracy of recovered geopotential coefficients is analyzed. Simulated precise orbit determination (POD) data and inter-satellite range data of formation-flying satellites containing white noise were generated, and geopotential coefficients were recovered from these simulated data sets using the crude acceleration approach. The accuracy of the recovered coefficients was quantitatively compared between data sets encompassing different ranging precisions. From this analysis, a rough prediction of the accuracy of geopotential coefficients could be obtained from the hypothetical mission. For a given POD precision, a ranging measurement precision that matches the POD precision was determined. Since the purpose of adopting inter-satellite ranging in a gravimetry mission is to overcome the imprecision of determining orbits, ranging measurements should be more precise than POD. For that reason, it can be concluded that this critical ranging precision matching the POD precision can serve as the minimum precision requirement for an on-board ranging device. Although the result obtained herein is about a very particular case, this methodology can also be applied in cases where different parameters are used.

식생지수를 이용한 환경영향평가 (Environmental Impact Assessment Using Vegetation Index)

  • 한의정;김명진;이재운;김상훈;홍준석;서창완
    • 환경영향평가
    • /
    • 제6권1호
    • /
    • pp.47-54
    • /
    • 1997
  • Vegetation Index(VI) derived from remote sensing data is used to assess ecosystem factor in Environmental Impact Assessment(EIA) process. Ecosystem factor has been prepared by Degree of Green Naturality(DGN) mainly in Environmental Impact Statements. But DGN has room for improvement of assessing actual ecosystem situation. The objectives of this study are to define the relationship between field measure DGN and VI, and to develop methodologies to use VI for assessing the status and conditions of natural ecosystem. For verification of DGN and VI, 35 sites using global positioning system are selected and reviewed. Correlation coefficients of DGN and VI shows highly as 0.69. Also VI in EIA found it can be applied to assess ecosystem. It concluded that VI as well as DGN can be applied to assess ecosystem newly and largescale.

  • PDF

항만 SOC가 수출입에 미치는 영향 실증분석 - 일본 항만을 중심으로 - (An Empirical Study of Port SOC Impact on Trade Volume : Focusing on Japanese Ports)

  • 안영균;이주원
    • 무역학회지
    • /
    • 제41권5호
    • /
    • pp.373-389
    • /
    • 2016
  • 본 연구는 총 무역액 중 95% 이상이 해상 수송되는 현실을 바탕으로, 해상 수송의 근간이 되는 항만의 자본스톡과 무역 규모 간의 회귀분석을 수행하는 논문이다. 패널 데이터 분석 및 고정 효과 모형 분석을 통해 항만 SOC가 무역 규모에 어떠한 영향을 미치는지를 실증분석 하였다. 항만 SOC를 6개 부문별로 분류하고, 장래 부문별 투자가 이루어졌을 때 무역 규모는 각각 얼마만큼의 영향을 받는 지를 추정하였다. 이와 더불어 LR(Likelihood ratio) 검정을 실시하여 고정효과 모형(Fixed Effects Model)을 통해 회귀분석 하였다.

  • PDF

자동차 조립라인에서 이중-헴머형(Double-hammer type) 임펙트 렌치와 오일-펄스형(Oil-pulse type)임펙트 렌치 에어공구의 국소진동가속도 및 소음수준 (Hand-Arm Vibration and Noise Levels of Double-Hammer Type and Oil-Pulse Type Impact Wrenches in Automobile Assembly Lines)

  • 정재열;김정만
    • 한국산업보건학회지
    • /
    • 제5권2호
    • /
    • pp.147-159
    • /
    • 1995
  • This study was conducted to introduce fundamental data of hand-arm vibration and noise exposure levels with impact wrenches(double-hammer impact wrenches and oil-pulse impact wrenches) used in automobile assembly lines considering the process variables and tool variables. In studing, products per day, required time screwing the bolts or nuts per bolts or nut were considered as process variables, and capacity of bolts or nuts, air consumptions per minute, tool weights, RPM were considered as tool variables. Hand-arm vibration levels of 3 axis in each hand were measured using the instruments compling with ISO/DIS 5349 and noise levels were measured using a noise logging dosimeter. The results were as follows : 1. Required time to screwing the bolt or nut by oil-pulse impact wrenches is shorter than double-hammer impact wrenches but total daily exposure time of oil-pulse impact wrenches was higher than double-hammer impact wrenches because the number of bolts or nuts per cycle was many. 2. Oil-pulse impact wrenches have been used to screwing the large bolt or nut in comparing with double-hammer impact wrenches and required time to screwing the bolts or nuts were shorter than double-hammer impact wrenches because oil-pulse impact wrenches were using high RPM and large air consumption per minute. Noise level of oil-pulse impact wrenches was 8 dB(A) lower than double-hammer impact wrenches. 3. Dominant hand-arm vibration levels of double-hammer impact wrenches in each hand were $8.24m/sec^2$ of Zh axis in right hand and $9.60m/sec^2$ of Xh axis in left hand. Dominant hand-arm vibration level of oil-pulse impact wrenches in each hand was $2.59m/sec^2$ of Xh axis in right hand and $3.23m/sec^2$ of Yh axis in left hand. 4. In double-hammer impact wrenches, corresponding hand-arm vibration levels of Xh, Yh, Zh axis in left hand were higher than hand-arm vibration levels of right hand in 3 axis. In oil-pulse impact wrenches, Xh axis of right, Yh axis of left, Zh axis of left were higher than the corresponding hand-arm vibration levels of Xh, Yh, Zh axis in right and left hand. 5. Correlation coefficients among Xh, Yh. Zh axis of right and left hand hand-arm vibration levels in double-hammer impact wrenches and oil-pulse impact wrenches were commonly high in Yh axis and correlation coefficients of Yh axis in double-hammer impact wrenches and oil-pulse impact wrenches were 0.76 and 0.86,respectively. 6. As a measure repetitiveness, plotting total daily exposure time with the number of bolts or nut per cycle, direct correlation was shown between repetitiveness and hand-arn vibration exposure, and correlation coefficient between the number of bolts or nut per cycle and total daily exposure time in double-hammer impact wrenches, oil-pulse impact wrenches were 0.84 and 0.50, respectively. 7. Considering the total acceleration level and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption in right hand, and bolt or nut capacity in left hand were commonly the variable that explainability was high. Considering the noise and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption per minute was commonly the variable that explainability was high.

  • PDF

이형 콘크리트 블록의 강도 평가방법에 관한 연구 (Development of A Strength Test Method for Irregular Shaped Concrete Block Paver)

  • 임무광;박대근;류성우;조윤호
    • 한국도로학회논문집
    • /
    • 제16권2호
    • /
    • pp.11-18
    • /
    • 2014
  • PURPOSES : This study aims to develop a strength test method for irregularly shaped concrete block paver. METHODS : Ten (10) different types of concrete block pavers including porous and dense blocks were tested for strength capacities. Destructive and non-destructive methods were used to develop a strength test method for irregularly shaped concrete block paver. The flexural strength evaluation was conducted in accordance to KS F 4419, while compressive strength was conducted with a 45.7mm-diameter core specimen. The impact echo test method was used to evaluate the elastic modulus. Finally, regression analysis was used to investigate the relationship between flexural strength, compressive strength and elastic modulus based on their corresponding test results. RESULTS : The flexural strength of the tested block pavers ranged from 4MPa to 10MPa. At 95% confidence level, the coefficients of determination between compressive-flexural strength relationship and compressive strength-elastic modulus relationship were 0.94 and 0.84, respectively. These coefficients signified high correlation. CONCLUSIONS : Using the test method proposed in this study, it will be easier to evaluate the strength of irregularly shaped concrete block pavers through impact echo test and compressive test, instead of the flexural test. Relative to the flexural strength requirement of 5MPa, the minimum values of compressive strength and elastic modulus, as proposed, are 13.0MPa and 25.0GPa, respectively.

노동의 분화에 관한 생태학적 분석

  • 김한곤
    • 한국인구학
    • /
    • 제11권2호
    • /
    • pp.3-10
    • /
    • 1988
  • This study is a replication of Clemente and Sturgis' study conducted among 600 American cities in 1972. The impact of population size, physical density, social density, and age of 56 Korean cities upon the extent of their industrial diversification was analyzed. Hypotheses concerning each independent variable were generated from the theory of the development of the division of labor proposed by Durkheim and subsequently adopted by human ecologists. Zero-order correlation analysis and regression analysis were employed to test the hypotheses. The standardized partial regression coefficients indicated that social density and age of cities exert significant positive impact upon industrial diversification. On the other hand, population size showed a significant negative impact upon industrial diversification. In addition, it was discovered that the combined influence of the independent variables account for 34.6 percent of the variation in industrial diversification. The findings of this study were compared with the results of Clemente and Sturgis' study. Some suggestions for future research are presented and discussed.

  • PDF

산업연관분석을 통한 관광산업의 경제적 파급효과 분석 (Economy Impact of Tourism Industry in Korea - Input/Output Analysis)

  • 지봉구;이계희;김태구
    • 한국콘텐츠학회논문지
    • /
    • 제11권12호
    • /
    • pp.884-892
    • /
    • 2011
  • 관광산업의 산업연관분석은 최근의 서비스산업에 대한 정책적 관심이 증가하고 있는 상황에서 경제적 효과를 측정하는 수단으로 유용성이 높다. 2007년과 2008년 산업연관표를 통하여 생산유발계수, 부가가치 유발계수, 수입유발계수, 영향력계수와 감응도계수를 도출하였다. 분석결과, 산업연관분석의 주요지표들은 최승이[6]의 연구와 비교하여 커다란 차이가 나타나지 않았다. 본 연구에서 관광산업의 범위를 축소한 상황에서도 비슷한 결과를 보인 것은 과거에 비해 관광산업의 영향력이 커진 것으로 추측된다. 향후 연구에서는 관광산업의 분류에 대한 합의가 필요하며, 각종 계수를 전체적으로 도출하는 것 뿐만 아니라 세부적인 관광산업에 대해서도 분석이 진행되어야 한다.