• Structural Engineering and Mechanics
• /
• v.88 no.5
• /
• pp.501-519
• /
• 2023

This paper introduces a new hybrid structural connection joint that combines shear walls with section steel beams, fundamentally resolving the construction complexity issue of requiring pre-embedded connectors in the connection between shear walls and steel beams. Initially, a quasi-static loading scheme with load-deformation dual control was employed to conduct low-cycle repeated loading experiments on five new connection joints. Data was acquired using displacement and strain gauges to compare the energy dissipation coefficients of each specimen. The destruction process of the new connection joints was meticulously observed and recorded, delineating it into three stages. Hysteresis curves and skeleton curves of the joint specimens were plotted based on experimental results, summarizing the energy dissipation performance of the joints. It's noteworthy that the addition of shear walls led to an approximate 17% increase in the energy dissipation coefficient. The energy dissipation coefficients of dog-bone-shaped connection joints with shear walls and cover plates reached 2.043 and 2.059, respectively, exhibiting the most comprehensive hysteresis curves. Additionally, the impact of laminated steel plates covering composite concrete floors on the stiffness of semi-rigid joint ends under excessive stretching should not be disregarded. A comparison with finite element analysis results yielded an error of merely 2.2%, offering substantial evidence for the wide-ranging application prospects of this innovative joint in seismic performance.

• Journal of Ocean Engineering and Technology
• /
• v.38 no.1
• /
• pp.1-9
• /
• 2024

The vertical center of gravity (VCG) has a significant impact on the roll motion response of a surface ship, particularly oil tankers based on the oil level in the tanker after discharging oil at several stations or positional changes, such as changes in the superstructure and deck structure. This study examined the motion response of the Korea very large crude carrier 2 (KVLCC2) at various VCGs, especially roll motion when the VCG changed. The potential theory in the Ansys AQWA program was used as a numerical simulation method to calculate the motion response. On the other hand, the calculations obtained through potential theory overestimated the roll amplitudes during resonance and lacked precision. Therefore, roll damping is a necessary parameter that accounts for the viscosity effect by performing an experimental roll decay. The roll decay test estimated the roll damping coefficients for various VCGs using Froude's method. The motion response of the ship in regular waves was evaluated for various VCGs using the estimated roll-damping coefficients. In addition, the reliability of the numerical simulation in motion response was verified with those of the experiment method reported elsewhere. The simulation results showed that the responses of the surge, sway, heave, pitch, and yaw motion were not affected by changing the VCG, but the natural frequency and magnitude of the peak value of the roll motion response varied with the VCG.

• Ocean Systems Engineering
• /
• v.14 no.3
• /
• pp.301-314
• /
• 2024

In this study, the lift coefficient and wave deformations for a two-dimensional flat-plate in non-cavitating condition were computed using a closed-form (analytic) solution. This plate moves at a constant speed beneath a free surface in water of finite depth. The model represents the flat-plate using a lumped vortex element within the constraints of potential flow theory. The kinematic and dynamic free surface conditions were combined and linearized. This linearized free surface condition was then applied to get the total velocity potential. The method of images was utilized to account for the effects of finite depth in the calculations. The lift coefficient of the flat-plate and wave elevations on the free surface were calculated using the closed-form solution. The lift coefficients derived from the present analytic solution were validated by comparing them with Plotkin's method in the case of deep water. Wave elevations were also compared with those obtained from a numerical method. A comprehensive discussion on the impact of Froude number, submergence depth of flat-plate from the calm free surface, the angle of attack and the depths of finite bottom on the results - namely, lift coefficients and free surface deformations - is provided.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.4
• /
• pp.277-283
• /
• 2018

The crop growth model has been widely used for climate change impact assessment. Crop growth model require genetic coefficients for simulating growth and yield. In order to determine the genetic coefficients, regional growth monitoring data or yield trial data of crops has been used to calibrate crop growth model. The aim of this study is to verify that yield trial data of corn is appropriate to calibrate genetic coefficients of CERES-MAIZE. Field experiment sites were Suwon, Jinju, Daegu and Changwon. The distance from the weather station to the experimental field were from 1.3km to 27km. Genetic coefficients calibrated by yield trial data showed good performance in silking day. The genetic coefficients associated with silking are determined only by temperature. In CERES-MAIZE model, precipitation or irrigation does not have a significant effect on phenology related genetic coefficients. Although the effective distance of the temperature could vary depending on the terrain, reliable genetic coefficients were obtained in this study even when a weather observation site was within a maximum of 27 km. Therefore, it is possible to estimate the genetic coefficients by yield trial data in study area. However, the yield-related genetic coefficients did not show good results. These results were caused by simulating the water stress without accurate information on irrigation or rainfall. The yield trial reports have not had accurate information on irrigation timing and volume. In order to obtain significant precipitation data, the distance between experimental field and weather station should be closer to that of the temperature measurement. However, the experimental fields in this study was not close enough to the weather station. Therefore, When determining the genetic coefficients of regional corn yield trial data, it may be appropriate to calibrate only genetic coefficients related to phenology.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.645-657
• /
• 2015

In this study floor impact noise and structure acceleration response of bare concrete slabs were predicted by using Finite Element Analysis(FEA). Prediction results were compared with experimental results to prove the accuracy of numerical model. Acoustic absorption were addressed by using panel impedance coefficients with frequency characteristics and structural modal damping of numerical model were applied by modal testing results and analysis of prediction and test results. By using frequency response function, the floor acceleration and acoustic pressure responses for various impact sources were calculated at the same time. In the FEA, the natural frequencies and the shapes of vibration and acoustic modes can be estimated through the eigen-value analysis, and it can be visually seen the vibration and sound pressure field and the contribution of major modes.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.463-468
• /
• 2013

Background: Body image dissatisfaction among breast cancer survivors has been associated with psychological stress resultant from breast cancer and resultant surgery. This study aimed to examine the psychometric properties of the Malay Version of the Breast-Impact of Treatment Scale (MVBITS) and to investigate the associations of retained factors with the Hospital Anxiety and Depression Scale (HADS) and the Rosenberg Self-Esteem Scale (RSES). Materials and Methods: The MVBITS was 'forward-backward' translated from English to Malay and then administered to 70 female breast cancer patients who came to the Oncology Clinic of University Malaya Medical Centre, Kuala Lumpur, Malaysia to undergo chemotherapy. Principal component analysis (PCA) with varimax rotation was performed to explore the factor structure of the MVBITS. Associations of retained factors were estimated with reference to Spearman correlation coefficients. Results: The internal consistency reliability of MVBITS was good (Cronbach's alpha 0.945) and showed temporal stability over a 3-week period. Principal component analysis suggested two factors termed as 'Intrusion' and 'Avoidance' domains. These factors explained 70.3% of the variance. Factor 1 comprised the effects of breast cancer treatment on the emotion and thought, while Factor 2 informed attempts to limit exposure of the body to self or others. The Factor 1 of MVBITS was positively correlated with total, depression and anxiety sub-scores of HADS. Factor 2 was positively correlated with total and anxiety sub-scores of HADS. MVBITS was also positively correlated with the RSES scores. Conclusions: The results showed that the Malay Version of Breast-Impact of Treatment Scale possesses satisfactory psychometric properties suggesting that this instrument is appropriate for assessment of body change stress among female breast cancer patients in Malaysia.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.3
• /
• pp.187-195
• /
• 2018

Ship's bottom slamming has been studied by many researchers for a very long time. But still some ships suffer structure damages caused by the bottom slamming impacts. This paper presents a practical computation method of the design impact pressure due to ship's bow bottom slamming. Large heave and pitch motions of a rigid hull ship are simulated by the nonlinear strip method in time domain and the relative colliding velocity between the bow bottom and the water surface is calculated using the simulated ship motions. The bottom slamming impact pressure is calculated as a product of the relative colliding velocity squared and the bottom slamming pressure coefficient that is obtained by modification of the SNAME pressure coefficients based on Ochi's slamming experiments. Not only the bottom slamming pressures but also the required bottom plate thicknesses are calculated and compared with those of the classification society rules. The comparisons show good agreements and it is confirmed that the present method is practically very useful for the bottom structure design against ship's bow bottom slamming impacts.

• Journal of Korean Clinical Nursing Research
• /
• v.29 no.3
• /
• pp.271-282
• /
• 2023

Purpose: This study is a descriptive research study attempted to identify the job stress and positive psychological capital of clinical nurses and to identify the factors that impact job embeddedness. Methods: Data were collected from 115 nurses with over one year of clinical experience working at a 500-bed B General Hospital. The collected data were analyzed with the SPSS 27.0 program using frequency and percentage, mean and standard deviation, Independent t-test, One-way ANOVA, Scheffé test, Pearson's correlation coefficients, and multiple linear regression. Results: As a result of multiple regression analysis, hope among the sub-factors of positive psychological capital (β=0.48, p<.001), matters related to the work schedule (β=-0.23, p=.005) among the sub-factors of job stress, and conflict with doctor (β=0.20, p=.013) was found to have an impact on job embeddedness, and the explanatory power of this regression model was 52.0% (F=13.12, p<.001). Conclusion: It was found that the positive psychological capital of clinical nurses has a positive impact on job embeddedness. In order to increase the job embeddedness of clinical nurses, it is necessary to develop, educate, and utilize specific intervention programs that can strengthen positive psychological capital. Efforts should be needed to prepare specific strategies for nurses to recognize the importance of hope and actively utilize positive psychological capital. In addition, it is necessary to create an organization-level working environment and continuous management to reduce the job stress of clinical nurses.

• Journal of Environmental Impact Assessment
• /
• v.29 no.6
• /
• pp.403-413
• /
• 2020

A mathematical model comprised with eight simultaneous quasi-linear partial differential equations was suggested to provide optimal chlorination strategy. Upstream weighted finite element method was employed to construct multidimensional numerical code. The code was verified against measured concentrations in three type of reactors. Boundary conditions and reaction rate were calibrated for the sixteen cases of experimental results to regenerate the measured values. Eight reaction rate coefficients were estimated from the modeling result. The reaction rate coefficients were expressed in terms of pH and temperature. Automatic optimal algorithm was invented to estimate the reaction rate coefficients by minimizing the sum of squares of the numerical errors and combined with the model. In order to minimize the concentration of chlorine and pollutants at the final usage sites, a real-time predictive control system is imperative which can predict the water quality variables from the chlorine disinfection process at the water purification plant to the customer by means of a model and operate the disinfection process according to the influent water quality. This model can be used to build such a system in water treatment plants.

• Journal of Radiation Industry
• /
• v.18 no.3
• /
• pp.183-193
• /
• 2024

As part of the social response to the radon bed incident in 2018, the Nuclear Safety and Security Commission took measures to collect and dispose of all radon beds. The Waste Management Act provides landfill disposal as one of the disposal methods for natural radioactive product waste, which is one of the NORM wastes. When NORM wastes are landfilled, workers and the public at the landfill site are exposed to radiation through various pathways, such as leaching of radionuclides through soil and groundwater, and multiple exposure factors are involved simultaneously. In order to improve the reliability of radiological impact assessment, the values of main exposure factors should be selected more accurately. Therefore, before developing the main exposure factors for site characteristics, it is necessary to prioritize main exposure factors reflecting domestic characteristics of NORM waste landfills. Therefore, in this study, the main exposure factors for NORM waste landfill were derived using NDD analysis. To derive the main exposure factors, the analysis tool was first selected as RESRAD-ONSITE computer code, and the exposure scenarios were mainly selected as a resident farmer and suburban resident scenario, recreation scenario, and industrial worker scenario. Then, the priority 1 and 2 factors were selected for sensitivity analysis, and a Korean standard model was established to reflect Korean characteristics. Finally, the sensitivity analysis was conducted through NDD, and the main exposure factors were derived based on this. In the resident farmer scenario, the contaminated zone distribution coefficients of ²²⁶Ra, ²¹⁰Pb, ²³²Th, ²²⁸Ra, ²³⁴U, and ²³⁸U, as well as precipitation and evapotranspiration factors, were derived as the main exposure factors. In the suburban resident scenario, the contaminated zone distribution coefficients of ²²⁶Ra, ²¹⁰Pb, ²³²Th, ²²⁸Ra, ²³⁴U, and ²³⁸U, as well as precipitation and evapotranspiration coefficients, were derived as the main exposure factors. In the recreation scenario, the contaminated zone distribution coefficient of ²³²Th was derived as the main exposure factor. For the industrial worker scenario, the erosion rate was derived as the main exposure factor. The main exposure factors for each scenario were analyzed to be different depending on the scenario characteristics. The results of this study can be utilized as a basis for radiological environmental impact assessment of NORM waste landfill in Korea.