• 수산해양교육연구
• /
• 제28권4호
• /
• pp.957-970
• /
• 2016

This study diagnosed the status of marine environmental impact assessment(MEIA) for project near the habitat of marine protected seagrass species such as Zostera caespitosa, Zostera asiatica, Phyllospadix iwatensis. For the preparation of a marine environmental impact statement, different monitoring parameters are used without any specific guideline for the assessment of current status. And also, both tools and techniques for MEIA are needed to improve for implementing. The monitoring plans and parameters are not considered well with the accuracy of the environmental predictions and effectiveness of any applicable mitigation measures. This study suggested the reasonable standard of the MEIA for the conservation of the marine protected seagrass species which have the habitat located near affected area. The inshore seagrasses need to be monitored including shoot count based on the "No Net Loss of Seagrass" as part of the monitoring parameters to assess the status of marine environment of environmental impact statement. In a process of effect prediction, we suggested a concentration of 10 mg/L suspended solids which added by the new developmental project near seagrasses habitat, referring to study of overseas case. But a further study for an appropriate standard is necessary effectively. In a mitigating process, priority needs to be considered in order of avoidance, minimization, reduction, compensation. In a post-monitoring process, it is necessary to monitor the seagrass species abundance to identify the variation of b/a (before and after) project. And in a case of implementing transplantation, survival rate need to be included to determine a success of project.

• Environmental Engineering Research
• /
• 제15권3호
• /
• pp.167-172
• /
• 2010

The effects of low impact development (LID) techniques, such as green roofs and porous pavements, on the runoff and pollutant load from an apartment complex were simulated using the Site Evaluation Tool (SET). The study site was the Olympic Village, a preexisting apartment complex in Seoul, South Korea, which has a high percentage of impervious surfaces (approximately 72% of the total area). Using the SET, the effects of replacing parking lots, sidewalks and driveways (37.5% of the total area) having porous pavements and rooftops (14.5% of the total area) with green roofs were simulated. The simulation results indicated that LID techniques reduced the surface runoff, and peak flow and pollutant load, and increased the evapotranspiration and soil infiltration of precipitation. Per unit area, the green roofs were better than the porous pavements at reducing the surface runoff and pollutant loads, while the porous pavements were better than green roofs at enhancing the infiltration to soil. This study showed that LID methods can be useful for urban stormwater management and that the SET is a useful tool for evaluating the effects of LID on urban hydrology and pollutant loads from various land covers.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.37-40
• /
• 2004

The impact/sliding wear tests have been performed in high temperature high pressure water in order to evaluate the effect of spring shape on the wear behavior of a spring supported tube for nuclear fuel fretting study. The results indicate that the tube wear volume and the size of the wear scar are closely related to each spring shape. From the analysis of the wear scar, it is possible to extract the real worn area (Aw) from the size of the wear scar (At). In addition, we found that the wear volume has a linear relation with the real worm area rather than the size of wear scar and this was only determined by each spring shape in the high temperature and pressure water condition. From the above results, it is possible to evaluate the wear resistant spring using the correlation between the variation of the real worn area and the wear behavior at each spring.

• Advances in environmental research
• /
• 제2권4호
• /
• pp.279-290
• /
• 2013

In this study, a comprehensive model developed to estimate greenhouse gas (GHG) emissions from urban area with low impact development (LID) and its integrated management practices (IMPs). The model was applied to the actual urban area in Asan Tangjeong district (ATD) as a case study. A rainwater tank (1200 ton) among various LID IMPs generated the highest amount of GHG emissions ($3.77{\times}10^5kgCO_2eq$) and led to the utmost reducing effect ($1.49{\times}10^3kgCO_2eq/year$). In the urban area with LID IMPs, annually $1.95{\times}104kgCO_2eq$ of avoided GHG emissions were generated by a reducing effect (e.g., tap water substitution and vegetation $CO_2$ absorption) for a payback period of 162 years. A sensitivity analysis was carried out to quantitatively evaluate the significance of the factors on the overall GHG emissions in ATD, and suggested to plant alternative vegetation on LID IMPs.

• 환경영향평가
• /
• 제12권5호
• /
• pp.323-340
• /
• 2003

There have been persistent civil appeals in Ansan area against the odor and aerosols emitted from nearby Banwol/Sihwa industrial complex. A fundamental solution for the good air quality has not been addressed yet in spite of the continuous counterplan to reduce odor emission. A systematic and scientific study is needed to examine the reason for the odor episode and to predict the impact coverage of odor pollution. An approach by computational simulation is considered to be adequate to investigate the transportation and the dispersion processes of air pollutants blown by sea breeze toward the coastal city, Ansan. This study has employed various dispersion models to simulate the transportation and the dispersion processes of odor pollutants by a local circulation between land/sea breeze using the data set of emission rates of odorous species from the Banwol/Sihwa industrial complex.

• 한국환경과학회지
• /
• 제24권9호
• /
• pp.1211-1220
• /
• 2015

Soil is the most important factor in natural environment for bio-diversity. Urbanization and development of city devastate urban soil by the fraternization of green network and run off pollution. In these facts, preservation of soil is the main issue in maintain of quality urban environment. In order to handle this issue, the gold network that link fragment soil patches is considered in maintain quality soil. This study researched the infiltration Treebox design technique based on the Low Impact Development. This technique suggest reduction of impervious area of the soil due to urbanization. The main concept of this study is encourage more permeable surfaces in urban area by using a infiltration planter. The function of the planter is hold run off as much as possible from intensive rainfall, and utilizes it in drought season. Also, this planter provides fertile soil for organism habitat by keeping appropriate moisture supplying.

• Structural Engineering and Mechanics
• /
• 제82권2호
• /
• pp.173-189
• /
• 2022

This study presents an experimental and numerically study about the effects of fiber reinforcement ratio on the behavior of concrete-filled steel tubes (CFST) under dynamic impact loading. In literature have examined the behavior of GFRP and FRP wrapped strengthened CFST elements impact loads. However, since the direction of potential impact force isn't too exact, there is always the probability of not being matched the impact force of the area where the reinforced. Therefore, instead of the fiber textile wrapping method which strengthens only a particular area of CFST element, we used fiber-added concrete-filled elements which allow strengthening the whole element. Thus, the effect of fiber-addition in concrete on the behavior of CFST elements under impact loads was examined. To do so, six simply supported CFST beams were constructed with none fiber, 2% fiber and 10% fiber reinforcement ratio on the concrete part of the CFST beam. CFST beams were examined under two different impact loads (75 kg and 225 kg). The impactors hit the beam from a 2000 mm free fall during the experimental study. Numerical models of the specimens were created using ABAQUS finite element software and validated with experimental data. The obtained results such as; mid-span displacement, acceleration, failure modes and energies from experimental and numerical studies were compared and discussed. Furthermore, the Von Misses stress distribution of the CFST beams with different ratio of fiber reinforcements were investigated numerically. To sum up, there is an optimum amount limit of the fiber reinforcement on CFST beams. Up to this limit, the fiber reinforcement increases the structural performances of the beam, beyond that limit the fiber reinforcement decreases the performances of the CFST beam under transverse impact loadings.

• 한국환경보건학회지
• /
• 제45권5호
• /
• pp.474-486
• /
• 2019

Objectives: This study was performed to investigate the emission characteristics of aldehydes emitted by the printing industry and to evaluate their impact on adjacent residential areas. Methods: Aldehydes and THC were measured from the front of the control device in the printing and coating process. Aldehydes and ketones were measured by workplace area, residential area, and background area to evaluate their impact. Results: The concentrations of formaldehyde (<0.047 ppm) and acetaldehyde (<0.068 ppm) in the printing and coating process were relatively low, and the methyl ethyl ketone used as the primary solvent was the main carbonyl compound in the printing process. The daily mean concentrations of formaldehyde and acetaldehyde were not significantly different by workplace area, residential area, or background area. However, the concentration of methyl ethyl ketone was high in the order of workplace area, residential area, and background area. Conclusions: The concentrations of formaldehyde and acetaldehyde in the adjacent residential areas are considered to be more influenced by secondary sources of photochemical reactions than by primary sources. Methyl ethyl ketone is considered to be highly influenced by the primary source, which is printing facilities.

• 항공우주시스템공학회지
• /
• 제7권1호
• /
• pp.39-43
• /
• 2013

In this study, damage assesment and repair technique of aircraft adopted on Sandwich composite structure were performed. The sandwich composite structure were damaged by drop weight type impact test machine. The damaged sandwich composite structure was repaired using external patch repair method after removing damaged area. This study presents comparison results of the experimental investigation between the impact damaged and the repaired specimen.

• 한국환경복원기술학회지
• /
• 제25권6호
• /
• pp.65-75
• /
• 2022

Urban flood management(UFM) strategy ought to consider the connections and interactions between existing and new infrastructures to manage stormwater and improve the capacity to treat water. It is also important to demonstrate strategies that can be implemented to reduce the flow at flooding sources and minimize flood risk at critical locations. Although the general theory of spatial impact is popular, modeling guidelines that can provide information for implementation in real-world plans are still lacking. Under such background, this study conducted a modeling research based on an actual target site to confirm the hypothesis that it is appropriate to install green infrastructure(GI) in the source area and to take structural protection measures in the impact area, as summarized in previous studies. The results of the study proved the hypothesis, but the results were different from the hypothesis depending on which hydrological performance indicators were targeted. This study will contribute to demonstrating the effectiveness of strategies that can be implemented to reduce the flow at flooding sources and minimize the risk of flooding in critical locations in terms of spatial planning and regeneration.