• 한국응급구조학회지
• /
• 제23권1호
• /
• pp.135-146
• /
• 2019

Purpose: The aims of this study were to identify the relationships among alcohol level, impact of event, occupational stress, and distress disclosure and to determine the influences on alcohol level among fire officials. Methods: Participants in this cross-sectional, descriptive study were 241 fire officials. Data were collected from June 2018 to July 2018 using self-reported questionnaires and were analyzed using IBM SPSS 22.0 software (IBM, Armonk, NY, USA). Results: The results revealed significant positive relationships between alcohol level and impact of event, and impact of event and occupational stress, and a negative relationships between occupational stress and distress disclosure. Regression analysis revealed that alcohol level accounted for 9.2% of the variance by gender, and impact of event(e.g., sleep problems and emotional numbness). Conclusion: These findings provide information that can be used in the development of mental health promotion programs for fire officials.

• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.1041-1050
• /
• 1995

The deformed shape of rod specimen of copper alloys was measured after the high-velocity impact against a rigid anvil and analyzed with one-dimensional theory to determine dynamic yield stress and strain-rate sensitivity which is defined as the ratio of dynamic yield stress to static flow stress. The evvect of two-dimensional deformation on the determination of dynamic yield stress by the one-dimensional theory, was investigated through comparison with the analysis by hydrocode. It showed that the one-dimensional theory is relatively consistent with two-dimensional hydrocode in spite of its simplicity in analysis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.304-309
• /
• 2000

Strain gage method is used to evaluate the mode I dynamic stress intensity factor of marging steel(18Ni) and titanium alloy(Ti-6A1-4V). To decide the best strain gage position on specimen, static fracture toughness test was performed. Then instrumented charpy impact test and dynamic tensile test was performed by using strain gage method for evlauating dynamic stress intensity factor. Strain gage signals on the crack tip region are used to calculate the stress intensity factors. It is found that strain gage method is more useful than method by using load which is obtained from impact tup to assess dynamic characteristics such as dynamic stress intensity factor.

• 대한가정학회지
• /
• 제47권10호
• /
• pp.51-61
• /
• 2009

The purpose of this research is to verify the impact of job stress on depression among married workers and to examine mediation effect of work-family conflict between the two variables. 356 married workers in Seoul and Gyonggi Province were selected to analyze. The results indicate that job stress was statistically influential on depression and work-family conflict. And job stress implied the partial mediation effect of work-family conflict, with both direct and indirect impacts on depression. These findings indicated that maltreatment of job stress and workfamily conflict would negatively impact on depression. Therefore, work organizations must launch and activate EAP(employee assistance programs) or family friendly welfare programs in order to increase the overall mental health of the employees.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.121-124
• /
• 1998

It is well known that during the oxygen cutting residual thermal stresses are produced in weldment. Surface compressive residual stress is one of reasons for improvement on fatigue durability. To reduce the residual stress and improve the fatigue strength applied the impact loading in oxygen cutting frame. After applying the impact loading, redistribution of residual stress was measured by cutting method and tested fatigue tests.

• Elastomers and Composites
• /
• 제48권2호
• /
• pp.172-179
• /
• 2013

고분자 소재의 충격강도 증대를 위해 충격보강제를 이용하는 경우가 많다. 본 연구에서는 충격보강제가 함유된 나일론6에 대해서 충격보강 원리를 분석하고자 충격시험을 모사하였다. 이를 위해 나일론6에 포함된 충격보강제인 고무 첨가제의 모델링을 시도하였다. 모델링을 토대로 충격시험을 모사하고 충격시편 단면에서의 응력 분포 및 방향을 통해 충격강도 증대 원리를 관찰하였다. 시편 단면에서 충격보강제 유무에 따른 해석을 하여 비교하였고, 충격보강을 위해 사용되는 고무첨가제의 표면처리 여부에 따른 해석도 수행하여 응력을 비교하였다. 해석결과 노치에서 발생한 응력이 내부로 전파되면서 충격보강제 주변으로 경로가 바뀌면서 응력이 감소되는 현상이 나타났다. 특히 충격보강제를 함유한 시편에서 노치부 표면의 응력이 낮았다. 또한, 크랙이 발생하는 방향과 직각인 방향의 주 응력 크기도 충격보강제를 포함한 시편에서 낮게 나타났다. 이로 인해 크랙의 전파가 감소되고 충격강도가 증대되었다고 분석된다. 이러한 컴퓨터모사 방법은 복합재료의 물성 증대 원인을 파악하는데 활용할 수 있다고 판단된다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.249-252
• /
• 2005

Prediction of damage caused by low-velocity impact in laminated composite plate is an important problem faced by designers using composites. Not only the inplane stresses but also the interlaminar normal and shear stresses playa role in estimating the damage caused. The work reported here is an effort in getting better predictions of damage in composite plate using DNS approach. In the DNS model, we discretize the composite plates through separate modeling of fiber and matrix for the local microscopic analysis. Through comparison with the homogenized model. In the view of microscopic mechanics with DNS model, interlaminar stress behaviors in the inside of composite materials is investigated and compared with the results of the homogenized model which has been used in the conventional approach of impact analysis.

• 소성∙가공
• /
• 제21권3호
• /
• pp.172-178
• /
• 2012

We performed a shot peening test and used a 2-D finite element model which predicts the compressive residual stress distribution below the material's surface. In this study, the concept of 'impact cycle' is introduced to account for the irregularity in the shot's impact position during testing. The impact cycle was imbedded in the finite element model. In the shot peening test, shot bombarded a type-A Almen strip surface with different impact velocities. To verify the proposed finite element model, we compared the deformed cross sectional shape of the Almen strips with the shapes computed by the proposed finite element model. Good agreement was noted between measurements and the finite element model predictions. With the verified finite element model, a series of finite element simulations was conducted to compute the residual stress distribution below the material's surface and the characteristics of these distributions are discussed.

• 대한기계학회논문집A
• /
• 제26권12호
• /
• pp.2656-2661
• /
• 2002

Multiple impact models to examine the effect of stress interference are proposed and investigated. The single shot model analysis, which used various shot ball conditions, was carried out to compare with multiple impacts analysis. Then the multiple impact analysis were performed to predict the effect of the shot ball distances. The results showed that the stress interference in the multiple impact model significantly reduced the maximum value of the compressive residual stresses. The residual stress profiles were strongly effected by the shot ball distances. The multiple impact model can simulate a realistic shot peening process rather than a single shot model does. It is concluded that the proposed model predicts the real process more accurately.

• Elastomers and Composites
• /
• 제49권4호
• /
• pp.284-292
• /
• 2014

고분자 소재는 금속 소재에 비해 기계적 강도, 특히 충격강도가 매우 취약하기 때문에 이의 증대를 위해 충격보강제를 이용하는 경우가 많다. 이러한 충격강도는 충격보강제의 함량과 분포에 따라 변화한다. 본 연구에서는 충격보강제가 함유된 나일론 6 시편에 대해서 충격시험을 모사하였고 충격시편 단면에서의 응력분포를 통해 충격강도 증대원리를 관찰하였다. 시편 단면에서 충격보강제의 개수와 분포에 따른 해석을 하여 비교하였다. 충격보강제의 개수가 증가할수록 부피가 감소하는 모델의 경우 놋치 표면의 응력과 주응력의 크기가 점차 높게 나타났다. 충격보강제의 개수가 증가할수록 충격보강제 전체의 총 표면적이 증가하는 모델의 경우에는 응력과 주응력이 점차 높게 관찰되었다.