• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.813-816
• /
• 2010

최근 지속가능한 개발의 개념은 국제적으로 경제 개발과 환경 보전 사이에서 논쟁이 중심이 되고 있으며, 수자원 개발과 관리는 이들 논쟁에서 중요한 부분을 차지하고 있다. 이와 더불어 유역을 관리함에 있어 수자원을 이수, 치수 및 수질의 단일 문제로 인식하는 것이 아니라 통합적으로 인식하는 유역통합관리(Integrated Watershed Management, IWM)의 필요성이 대두되고 있다. 이에 본 연구는 유역통합관리에 앞서 유역의 상태 및 문제점을 파악하기 위한 방법으로 EEA (European Environment Agency)에서 개발한 추진력(Driving force)-압력(Pressure)-상태(State)-영향(Impact)-반응(Response) (DPSIR) 개념 이용하여 3개의 세부 지표인 이수지표, 치수지표, 수질지표로 구성된 하나의 통합 지수인 유역수자원평가지수를 개발하였다. 세부지표인 이수지표는 연속무강우일수, 인구밀도, 용수수요, 물재이용률 등 16개의 구성요소, 치수지표는 홍수범람위험 지역 내 거주 인구수, 홍수방어시설용량, 개수율, 100 mm 이상 강수일수 등 15개의 구성요소, 수질지표는 BOD (Biochemical Oxygen Demend) 부하량, 수질 등급, 연중 목표 수질 달성일수 등 13개의 구성요소로 이루어져있다. 이를 북한강 유역 중 북한 지역을 제외한 유역 즉, 수자원단위지도 상의 춘천댐권역(1010) ~ 청평댐권역(1015)의 6개 중권역에 적용하여 비교하였다. 세부지표의 주된 요소인 유출량의 모의를 위해 장기유출모형인 HSPF (Hydrological Simulation Program - Fortran)를 사용하였다. 모형에 입력된 유역평균강수량 자료는 1973년 ~ 2008년까지의 37년의 자료기간을 갖는 북한강유역의 5개 기상관측소 자료를 Thiessen network를 이용하여 산정하였다. 본 연구를 통해서 북한강 유역의 현재 수자원의 상태를 지수화하여 나타내고 그 결과를 비교해보았다. 이 결과는 유역 수자원의 파악하여 유역통합관리시 유역의 문제점을 파악하고 이를 수정하기 위한 의사결정 우선순위를 정하는데 사용될 수 있다.

• Journal of Environmental Science International
• /
• v.11 no.3
• /
• pp.247-255
• /
• 2002

Indoor and outdoor nitrogen dioxide (NO$_2$) concentrations were measured and compared with measurements of personal exposures of 95 persons in Seoul, Korea and 57 persons in Brisbane, Australia, respectively. Time activity diary was used to determine the impact on NO$_2$ exposure assessment and microenvironmental model to estimate the personal NO$_2$ exposure. Most people both Seoul and Brisbane spent their times more than 90% of indoor and more than 50% in home, respectively. Personal NO$_2$ exposures were significantly associated with indoor NO$_2$ levels with Pearson coefficient of 0.70 (p＜0.01) and outdoor NO$_2$ levels with Pearson coefficient of 0.66 (p＜0.01) in Seoul and of 0.51 (p＜0.01) and of 0.33 (p＜0.05) in Brisbane, respectively. Using microenvironmental model by time weighted average model, personal NO$_2$ exposures were estimated with NO$_2$ measurements in indoor home, indoor office and outdoor home. Estimated NO$_2$ measurements were significantly correlated with measured personal exposures (r = 0.69, p＜0.001) in Seoul and in Brisbane (r = 0.66, p＜0.001), respectively. Difference between measured and estimated NO$_2$ exposures by multiple regression analysis was explained that NO$_2$ levels in near workplace and other outdoors in Seoul (p = 0.023), and in transportation in Brisbane (p = 0.019) affected the personal NO$_2$ exposures.

• KIEAE Journal
• /
• v.5 no.3
• /
• pp.11-16
• /
• 2005

The recent trends of high-density and high-rise in apartment housing have caused the problems of decrease in ventilation rates and increase of indoor pollutant contaminants. SHS(Sick House Syndrome) has now become a major issue and threats the health of residents. To solve these indoor air problems, increase in ventilation rate is considered as one of the most efficient approach. Thus, the recent housing development is pursuing improvement in the site design and the layout of apartment building blocks to promote natural ventilation is now investigated as one of the fundamental solutions. This study was focused on the air flow characteristics of outdoor environment in an apartment complex to keep the pollutants out of the site. Age of air and pressure difference have been used as indices of the outdoor air quality. Four different types of apartment building layouts have been analyzed by CFD simulation. This study again selected a real apartment housing complex as a case study model. By analyzing the pressure differences between the front and rear of an apartment building block, the ventilation performance in each individual unit was evaluated, and its impact on ventilation performance is investigated by analyzing the stagnant air around the apartment building blocks. During this process, existing patterns of apartment housing layout have been evaluated, and the most appropriate site layout has been chosen to analyze the outdoor airflow patterns. Based on the analysis of airflow patterns of site layout, the possibilities of improving ventilation performance of an individual apartment housing is proposed.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.116-122
• /
• 2014

This study proposes a system reliability analysis of rack storage facilities subjected to forklift colliding events. The proposed system reliability analysis consists of two steps: the first step is to identify dominant failure modes that most contribute to the failure of the whole rack facilities, and the second step is to evaluate the system failure probability. In the first step, dominant failure modes are identified by using a simulation-based selective searching technique where the contribution of a failure mode to the system failure is roughly estimated based on the distance from the origin in the space of the random variables. In the second step, the multi-scale system reliability method is used to compute the system reliability where the first-order reliability method (FORM) is initially used to evaluate the component failure probability (failure probability of one member), and then the probabilities of the identified failure modes and their statistical dependence are evaluated, which is called as the lower-scale reliability analysis. Since the system failure probability is comprised of the probabilities of the failure modes, a higher-scale reliability analysis is performed again based on the results of the lower-scale analyses, and the system failure probability is finally evaluated. The illustrative example demonstrates the results of the system reliability analysis of the rack storage facilities subjected to forklift impact loadings. The numerical efficiency and accuracy of the approach are compared with the Monte Carlo simulations. The results show that the proposed two-step approach is able to provide accurate reliability assessment as well as significant saving of computational time. The results of the identified failure modes additionally let us know the most-critical members and their failure sequence under the complicated configuration of the member connections.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.9-14
• /
• 2006

This paper develops a complete methodology for the mitigation of ionosphere spatial anomalies by GBAS systems fielded in the Conterminous U.S. (CONUS). It defines an ionosphere anomaly threat model based on validated observations of unusual ionosphere events in CONUS impacting GBAS sites in the form of a linear ‘wave front’ of constant slope and velocity. It then develops a simulation-based methodology for selecting the worst-case ionosphere wave front impact impacting two satellites simultaneously for a given GBAS site and satellite geometry, taking into account the mitigating effects of code-carrier divergence monitoring within the GBAS ground station. The resulting maximum ionosphere error in vertical position (MIEV) is calculated and compared to a unique vertical alert limit, or $VAL_{H2,I}$, that applies to the special situation of worst-case ionosphere gradients. If MIEV exceeds $VAL_{H2,I}$ for one or more otherwise-usable subset geometries (i.e., geometries for which the 'normal' vertical protection level, or $VPL_{H0}$, is less than the 'normal' VAL), the broadcast ${\sigma}_{pr_{-}gnd}$ and/or ${\sigma}_{vig}$ must be increased such that all such potentially-threatening geometries have VPL$_{H0}$ > VAL and thus become unavailable. In addition to surveying all aspects of the methods used to generate the required ${\sigma}_{pr_{-}gnd}$ and ${\sigma}_{vig}$ inflation factors for CONUS GBAS sites, related methods for deriving similar results for GBAS sites outside CONUS are suggested.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.228-229
• /
• 2018

To deal with the increasing volume of the vessel's cargo in the container flow and the enlargement trend of the vessels, Pusan port is making efforts from various perspectives such as the creation of global infrastructure and the promotion and development of new wharves. If Pusan port can provide and prepare the eligible infrastructures for future berthing of larger vessels. It will be able to operate with vessels larger than 20,000TEU, and it will also be able to grow into one of the main port of the Mega max era.. However, when large vessels dock, many berths, equipment, working time and labors are required. As a result, the problem of delaying time of other consecutive vessels will inevitably arise. In response to this, we analyze the impact and effect of the birthing of a large vessel on other congestion vessels at a container terminal.

• International Journal of Automotive Technology
• /
• v.6 no.2
• /
• pp.149-159
• /
• 2005

A full nonlinear finite element P185/70Rl4 passenger car radial-ply tire model was developed and run on a 1.7-meter-diameter spinning test drum/cleat model at a constant speed of 50 km/h in order to investigate the tire transient response characteristics, i.e. the tire in-plane free vibration modes transmissibility. The virtual tire/drum finite element model was constructed and tested using the nonlinear finite element analysis software, PAM-SHOCK, a nonlinear finite element analysis code. The tire model was constructed in extreme detail with three-dimensional solid, layered membrane, and beam finite elements, incorporating over 18,000 nodes and 24 different types of materials. The reaction forces of the tire axle in vertical (Z axis) and longitudinal (X axis) directions were recorded when the tire rolled over a cleat on the drum, and then the FFT algorithm was applied to examine the transient response information in the frequency domain. The result showed that this PI 85/70Rl4 tire has clear peaks of 84 and 45 Hz transmissibility in the vertical and longitudinal directions. This result was validated against more than 10 previous studies by either theoretical or experimental approaches and showed excellent agreement. The tire's post-impact response was also investigated to verify the numerical convergence and computational stability of this FEA tire model and simulation strategy, the extraordinarily stable scenario was confirmed. The tire in-plane free vibration modes transmissibility was successfully detected. This approach was never before attempted in investigations of tire in-plane free vibration modes transmission phenomena; this work is believed to be the first of its kind.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1852-1865
• /
• 2017

The vibration of the structures with restrained motion has long been observed in various engineering fields. When the motion of vibrating structure is restrained due to the adjacent objects, the frequencies and the mode shapes of the structure change and its vibration characteristics becomes unpredictable, in general. Although the importance of the study on this type of vibration model increases in many engineering areas, most studies conducted so far are limited to the theoretical study on dynamic responses of the structure with stops, including some experimental works. Specially, the study on the nonlinear phenomena due to the impact between the structure and the stops have been mainly performed theoretically. In the paper, both numerical analyses and experiments are conducted to study the chaotic vibration characteristics of the nonlinear motion and the dynamic response of a cantilevered beam which has restrained motion at the free end by the stops. Results are presented for various magnetic forces and gaps between the beam and stops. The conclusions are as follows : Firstly, Numerical simulation results have a good agreement with experimental ones. Secondly, the effect of higher modes of beams are increased with increasing magnitude of exciting force, and displacement and velocity curves become more complicated shapes. Thirdly, nonlinear characteristics tend to appear greatly with increasing magnitude of exciting force, and fractal dimension is increased.

• Journal of Intelligence and Information Systems
• /
• v.19 no.2
• /
• pp.21-38
• /
• 2013

The purpose of this study is to investigate the influence of behavioral factors (buyer's tendency to reflect stockout and overstock experiences in ordering decision) on the supply chain performance. This study employs system dynamics to examine the influence of these behavioral factors derived from the interview with several representatives of retailers in South Korea. The results show that different contract can bring different performance (total profit, seller's profit, buyer's profit, order quantity, sales quantity, overstock, and stockout). The results also suggest that these behavioral factors play a significantly influential role in the performance of supply contract. These results imply that supply contract should be established based on the analysis of behavioral factors of supply chain participants.

• Journal of Navigation and Port Research
• /
• v.26 no.3
• /
• pp.261-268
• /
• 2002

At recently, Oil spill accident of large size oiler that happen domestic and outside the country is occured to social impact us as well as economical damage in sea environment. Also, because spread extent of pollution accident is reaching harbor, bay and close water areas, as necessity that traffic control ships are sea place. VTS is changing to concept that control space is magnified gradually. Our country is operated to 14 harbors which is control center. But abroad is operating coastal VTS that do main waterway and coastals to authority dimension. Therefore, necessity that traffic density of ship manages high coastals and ship traffic of waterway to our country is risen. This paper is execute sea traffic survey at Mokop sea areas and sea casualty occurs. It proposal that coastal VTS center field of most suitable and position of radar site.