• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.372-378
• /
• 2021

A body armor vest is a form of munition related directly to the safety and life of combatants. Therefore, it must meet the requirements for ballistic resistance. The ROK demands the performance of body armor vest meet the Level IIIA specified by the NIJ STD-0101.06 published by the US National Institute of Justice. This study performed acceptance tests on body armor vests. The factors for evaluating the ballistic resistance evaluated were not only whether it penetrates when shooting but also whether the BFS (Backface Signature) depth does not exceed 44 mm when it does not penetrate. The factors were assessed to determine if they were consistent or not. The BFS depth is affected by various test factors, such as the physical properties of the backing material and the changes in the amount of impact with the bullet velocity. In this study, an analysis of the bulletproof performance was performed by extracting the data with the same conditions using ANOVA to remove the influence of these external factors. The analysis revealed a correlation between the BFS depth, bullet velocity, vest conditions, and protection area. The mass production process was analyzed by estimating the Interval of BFS on each lot. Through this, a new methodology for ballistic resistance evaluation and paradigm for future quality assurance is suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.573-582
• /
• 2021

In this study, a series of processes for evaluating the effective protection against barriers that should be equipped in institutions that perform reliability tests on high-risk ammunition, such as high-explosive ammunition, were introduced. The impact that high-explosive bombs can have on personnel includes damage to the eardrum and lungs caused by explosion overpressure and penetrating wounds that can be received by fragments generated simultaneously with the explosion. Therefore, a high-explosive with COMP B explosives as its contents were set up, and an explosion protection theory investigation to calculate the degree of damage, numerical calculations and simulations were performed to verify the protection power. A numerical calculation revealed the maximum explosion overpressure on the protective wall when the high-explosive exploded and the penetration force of the fragment against a 50 mm-thick protective wall to be 77.74 kPa and 41.34 mm, respectively. In the simulation verification using AUTODYN, the maximum explosion overpressures affecting the firewall and personnel were 56.68 kPa and 18.175 kPa, respectively, and the penetration of fragments was 35.56 mm. This figure is lower than the human damage limit, and it was judged that the protective power of the barrier would be effective.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.1
• /
• pp.59-66
• /
• 2022

In order to solve the problem of urban traffic congestion, Urban Air Mobility (UAM) concept using Electric Vertical Take-off and Landing (eVTOL) aircraft has been gaining popularity, and many domestic and international studies are underway. However, since these aircraft inevitably fly over densely populated areas, it is essential to ensure safety, which starts with accurately analyzing the crash risk. In this paper, the locations and impact speeds of crash are computed using six degree-of-freedom simulations of an eVTOL aircraft in a fixed-wing mode. System malfunction was modeled by a sudden loss of thrust with control surfaces being stuck during cruise. Because most of these eVTOL aircraft are still under development, a methodology of constructing a six degree-of-freedom dynamics model from generic specification is also developed. The results show that the crash locations are highly concentrated right under the aircraft within a square that has an edge length similar to the cruise altitude. Speed distribution is more complicated because almost identical crash locations can be achieved by two very different paths resulting in a large variation in the speeds.

• International Journal of Computer Science & Network Security
• /
• v.22 no.1
• /
• pp.331-339
• /
• 2022

The global process of transition from industrial to information society, as well as socio-economic changes taking place in Ukraine, require significant changes in many areas of state activity. It is especially connected with the reforms in the sphere of education. Today, national programs provide for the development of education on the basis of new progressive concepts, the introduction of the educational process of new pedagogical technologies and scientific achievements, the creation of a new system of information education, entrance of Ukaine into the transcontinental computer information system. Information technologies are qualitatively changing the key resources of development: this is no longer a space with fixed production, but primarily mobile finance and intelligence. They have a direct impact on the formation of personal growth, professional content and self-organization, emotional and psychological maturity and consciousness, and so on. One of the main factors in ensuring the stability and social education of the country's citizens is the culture of security, the formation and development of which is an urgent problem today. Comprehensive and systematic development of security culture will significantly increase the readiness of the population, the level of environmental, labor and patriotic education, reduce human losses, material damage from emergencies. Ecological education can be carried out more successfully only gradually and in accordance with the socio-psychological periods of one's development: kindergarten - school - college - university. The creation of such a system of environmental education should be enshrined as the basis of state environmental policy as a constitutional norm with the usage of information technology. Graduates of universities, who are the future of our country, after mastering the skills of basic environmental education must have a high level of environmental culture, which is, in turn, part of general human culture, and investigate environmental issues from the standpoint of their profession. It is known that with the help of environmental education the collective intelligence of society is formed, which can predict human activities and processes occurring in nature, and in some way to help with the elimination of crises. It is through environmental education that another system of human values is being formed, which places great emphasis on intangible wealth and solidarity, and great responsibility of humanity for the ecological state of the native country; provides a higher standard of living as a result of sustainable development, through the introduction of information technology in this system. To improve the quality of life, we need better knowledge, which must be implemented through information technology at the international level.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.2
• /
• pp.1-16
• /
• 2022

The location of the bus stop on urban roads should be installed at a point where it is convenient for users and the impact of bus stops on the traffic flow is minimized. However, the location of the bus stops is determined indiscriminately due to the lack of related research. Therefore, this study developed a traffic accident prediction model and calculated the proper separation distance for the bus stops through an optimization technique. The result of the study indicates that the bus stop can be installed in the form of a mid-block approximately 87 to 166 m away from the intersection in the road section. This result is valid if the number of main road lanes in the road section is 2 to 4 with a level of traffic from 1,000 to 3,000 v/h. In the section with 5 to 6 lanes, it is desirable to install a bus stop close to the intersection by about 42 to 97 m.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.2
• /
• pp.62-73
• /
• 2022

As the competition among the autonomous vehicle (AV, here after) developers are getting fierce, Korean government has been supporting developers by deregulating safety standards and providing financial subsidies. Recently, some OEMs announced their plans to market Lv3 and Lv4 automated driving systems. However, these market changes raised concern among public road management sectors for monitoring road conditions and alleviating hazardous conditions for AVs and human drivers. In this regards, the authors proposed a methodology for monitoring road infrastructure to identify hazardous factors for AVs and categorizing the hazards based on their level of impact. To evaluate the degrees of the harm on AVs, the authors suggested a methodology for managing road hazard factors based on vehicle performance features including vehicle body, sensors, and algorithms. Furthermore, they proposed a method providing AVs and road management authorities with potential risk information on road by delivering them on the monitoring map with node and link structure.

• Journal of Navigation and Port Research
• /
• v.46 no.3
• /
• pp.203-208
• /
• 2022

Recently, various digital technology issues such as e-Navigation, Maritime Autonomous Surface Ship (MASS) and Smart ships have constantly emerged in the maritime industry, based on the fourth industrial revolution. The International Maritime Organization is gradually tightening regulations for marine safety and marine environmental protection, and these strengthened regulations are leading to new maritime industries. Thus, the purpose of this study was to design a suitable model to analyze the industrial competitiveness of domestic autonomous operation technology industry, based on the Porter's diamond model. Based on a total of five evaluation factors and 13 detailed factors, the industrial competitiveness of the domestic autonomous operation technology industry was evaluated qualitatively and quantitatively. This industry, which is in the early stage of industrial development, was evaluated as 16.9 points relative to indexing industrial competitiveness. Currently, it is characterized by the simultaneous development of related regulations and core technologies, from the establishment of the scope of the industry. The industrial competitiveness evaluation considering these industrial characteristics is expected to serve as the basis for strategic support and new industrial policy, and impact a wide range of related industries such as shipping, logistics, ports, and shipbuilding and equipment industries.

• Journal of the Society of Disaster Information
• /
• v.18 no.2
• /
• pp.306-313
• /
• 2022

Purpose: The purpose of this study is suggested to improve upon current existing methods of ammonia chemical accident prevention and damage reduction. Method: Ammonia is one of the most common toxic substances that causes frequent chemical accidents. And it was selected as leakage materials according to statistics on chemical accident. Based on actual cases of chemical accidents, CARIS modeling was used to compare the damage impact range of Ammonia and HCl and Cl. Also, find out problems with the current systems. Result: As a result of find out the range of accident influence that spreads to the surroundings when an ammonia chemical accident, it was longer than the range of influence of hydrochloric acid and shorter than that of chlorine. In addition, it was found that when chemical accident by ammonia, hydrochloric acid, or chlorine, there are apartments and schools, which can have an effect. Conclusion: It is decided that it is necessary to determine whether or not chemical accident prevention management plans and statistical investigations are submitted for workplaces dealing with ammonia, and detailed guidelines and reviews are necessary. In addition, it is judged that it is necessary to establish a DB for ammonia handling plants, and it is considered that information sharing and joint inspection among related organizations should be pursued.

• Composites Research
• /
• v.35 no.6
• /
• pp.447-455
• /
• 2022

Currently, the problem of pollution of the marine environment by microplastics is emerging seriously internationally. In this study, to develop a lightweight portable microplastic collection device, the types and number of microplastics in 21 coastal areas nationwide in Korea were investigated. And CFRP (Carbon Fiber Reinforced Plastic), GFRP (Glass Fiber Reinforced Plastic), ABS (Acrylonitrile Butadiene Styrene copolymer) and aluminum were applied for design and analysis of microplastic collection device to have the durability, corrosion resistance and lightweight. As a result of sample collection and classification from the shore, it was confirmed that microplastics were distributed the most in Hamdeok beach, and the polystyrene was found to be mainly distributed microplastics. Particle information through coastal field survey and CFD (Computational Fluid Dynamics) analysis were used to analyze the flow rate and distribution of particles such as sand and impurities, which were applied to the structural analysis of the cyclone device using the finite element method. As a result of structural analysis considering the particle impact inside the cyclone device, the structural safety was examined as remarkable in the order of CFRP, GFRP, aluminum, and ABS. In the view of weight reduction, CFRP could be reduced in weight by 53%, GFRP by 47%, and ABS by 61% compared to aluminum for the cyclone device.

• Journal of Space Technology and Applications
• /
• v.1 no.1
• /
• pp.121-130
• /
• 2021

Since the 1960s, the United States has developed and implemented policies to encourage commercial space launches. Specifically, national policies have been implementing to expand the role of commercial space actors, which required establishing a process for private space launches. In the early days of the space age, private launches accounted for a small portion of the total launch rate, but, since the 1990s, the proportion has exploded, with private space companies presenting large projects one after another, accounting for more than 50% of the total launch rate. This diversification of space actors and the increase in orbital space objects have led to changes in the perspectives of existing space environmental management processes. During and after the Cold War, when the space age began, civilian actors' actions were limited, and policies limited their actions, too. So they had little impact on government space activities. However, space technology's entry barrier has lowered since, and policies to facilitate commercial space launches have been implemented for a long, and the accumulated amount of space waste over the past 60 years is also threatening the safety, stability, and sustainability of space use. This paper examined how the United States, the most active country in commercial space launches, has managed commercial space launches. The United States has a Space Traffic Management (STM), distributed to departments such as the Department of Defense, Department of Commerce, Department of Transport, NASA, etc. A review of changes in U.S STM management policy could also provide implications for us to manage commercial space launches in Korea.