• Journal of Korean Academy of Nursing Administration
• /
• v.22 no.5
• /
• pp.471-479
• /
• 2016

Purpose: This study was conducted to evaluate the level of safety climate, fatigue, and safety performance and to identify the impact of safety climate and fatigue on the safety performance of operating room nurses. Methods: The study design was a descriptive survey. Participants were 174 operating room nurses from two general hospitals and two university hospitals in S and D cities. Three structurally designed questionnaires were used to evaluate their safety climate, fatigue, and safety performance. Collected data were analyzed using descriptive analysis, t-tests, ANOVAs, Pearson correlation coefficient, and stepwise multiple regression. Results: Safety performance of operating room nurses had a mean of 3.26 on a 5-point scale. 'Current department career'(${\beta}=.17$, p=.006) and 'safety climate (work-unit contribution) (${\beta}=.63$, p<.001) accounted for 39% of the variance in operating room nurses' safety performance. Conclusion: Findings indicate that work-unit contribution towards safety climate is an important factor in increasing operating room nurses' safety performance. Therefore, it is essential to find motivational properties consistent with the characteristics of the operating room environment.

• Journal of the Korean Society of Safety
• /
• v.28 no.1
• /
• pp.102-108
• /
• 2013

This study aimed to examine the impact of workers' perceptions of the safety climate on job satisfaction and intention to turnover in the manufacturing industry. Data was collected from employees(n=143) working in the manufacturing industry. The perceived safety climate included perceptions of the safety commitment of the management, safety leadership of the immediate supervisor, and safety policy. Hierarchical regressions were conducted to identify the significance of the relation between the sub-variable of the perceived safety climate and job satisfaction, and intention to turnover. The results show that safety commitment and safety policy are significant predictors of job satisfaction. The immediate supervisor's safety leadership was significantly correlated with intention to turnover. These results indicated that the perceived safety climate of workers in the manufacturing industry might influence job satisfaction and intention to turnover. Therefore, organizations in the manufacturing industry should focus on improving safety climates to enhance job satisfaction and prevent employee turnover.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.163-170
• /
• 2000

Accident statistics shows that the portion of fatal occupant injuries due to side impacts is considerably high. The side impact usually leads to a severe intrusion of side structure into the passenger compartment. Furthermore, the safety zone for the side impact is relatively small compared to the front impact. Those kinds of physics for side impact frequently result in a fatal injury for the occupant. Therefore, NHTSA and EEVC are trying to intensify the regulation for the occupant protection against side impact. Both the regulation and recent market trends are asking for an installation of side airbag. There are several types of system configuration for side impact sensing. In this paper, we adopt the acceleration-based remote sensing method for the side airbag control system. We mainly focus on the development of hardware and crash discrimination algorithm of remote sensing unit. The crash discrimination algorithm needs fast decision of airbag firing especially for high-speed side impact such as FMVSS 214 and EEVC tests. It is also required to distinguish between low-speed fire and no-fire events. The algorithm should have a sufficient safety margin against any misuse situation such as hammer blow, door slam, etc. This paper introduces several firing criteria such as acceleration. velocity and energy criteria that use physical value proportional to crash severity. We have made a simulation program by using Matlab/Simulink to implement the proposed algorithm. We have conducted an algorithm calibration by using real crash data for 2,500cc vehicle. The crash performance obtained by the simulation was verified through a pulse injection method. It turned out that the results satisfied the system requirements well.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.4
• /
• pp.45-56
• /
• 2023

This study attempted to provide implications by analyzing the impact of business Owner's safety commitment on industrial accidents and examining the mediating role of management supervisors' safety leadership and worker participation. Analysis was conducted on 2,067 manufacturing sites with 20 to 50 employees in the 10th Occupational Safety and Health Survey data. SPSS waw used to secure the reliability of the measurement variable. Hypothesis vertification was carried out after securing the suitability and validity of the structural model using AMOS. The direct impact of three latent variables on industrial accidents was confirmed: the business owner's safety commitment, the management supervisor's safety leadership, and the worker participation. The employer's safety will and the management supervisor's safety leadership do not directly affect industial accidents, but it has been verified that worker participation has a diret impact on industrial accident reduction. In addition, it has been confirmed that the safety leadership and worker participation of the management. Supervior have a complete mediating effect on the reduction of industrial accidents by mediating with the safety leadership of the management supervior and the participation of the workers. This study analyzed the impact on industrial accidents by dividing the stakeholders constituting the workplace into three classes: business owners, superviors, and workers, but the results suggest that employers and all workers inside the workplace may be organically linked to achieving the goal of reducing industrial accidents. Therefore, in order to establish an autonomous safety management system for safety and health at workerplaces, efforts are needed to reduce industrial accidents in their respective location by forming an organic community among internal stakeholders.

• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.75-80
• /
• 2005

In this paper, when CF/EPOXY laminates for high efficiency space structure are subjected to FOD(Foreign Object Damage), the effects of temperature change on the impact damages(inter laminar separation and transverse crack) of CF/EPOXY laminates and the relationship between residual life and impact damages ale experimentally investigated. Composite laminates used in this experiment are CF/EPOXY orthotropic laminated plates, which have two-interfaces $[0^{\circ}_6/90^{\circ}_6]S$ and four-interfaces $[0^{\circ}_3/90^{\circ}_6/0^{\circ}_3]S$. CF/EPOXY specimens with impact damages caused by a steel ball launched from the air gun were observed by the scanning acoustic microscope under room and high temperatures. In this experimental results, various relations were experimentally observed including the delamination area vs. temperature change, the bending strength vs. impact energy and the residual bending strength vs. impact damage of CF/EPOXY laminates. And as the temperature of CF/PEEK laminates increases, the delaminaion areas of impact-induced damages decrease linearly. A linear relationship between the impact energy and the delamination areas were observed. As the temperature of CF/PEEK laminates increases, the delamination areas decrease because of higher initial delaminatin damage energy.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1858-1868
• /
• 2021

Resisting an accidental impact of large commercial aircrafts is an important aspect of advanced nuclear power plant (NPP) design. Especially after the 9·11 event, some regulations were enacted, which required the design of NPPs should consider the accidental impact of large commercial aircrafts. Normal working of equipment is important for stopping reactor under an impact when an NPP is in operation. However, there is a lack of reliable analysis and research on the impact test of nuclear prototype equipment. Therefore, in order to study the response of the equipment under high acceleration impact, a centrifugal pump is selected as the research object to perform the impact test. A horizontal half-sinusoidal pulse wave was applied to the working pump. The test results show that the horizontal response of the motor and flange is greater compared to other parts, as well as the vertical response of the coupling. The stress response of the pump body support and motor support is high, hence these parts should be considered in the design of the pump. Finally, combined with the damage and stress evaluation results of the pump under different amplitudes, the ultimate impact acceleration that the pump can withstand is given.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2011

In this study the optimal stacking section was selected by pendulum impact test for six different stacking sections of the composite safety barrier. The beam cross-section shape was determined through the poll on six different beam cross-section shapes. The six kinds of stacking design for the determined beam cross-section were suggested. CSM, DB, DBT and Roving fibers were used for stacking design. Horizontal beam and 3:1 sloped beam were modeled by using LS-DYNA. The fall impact simulation was carried out by using rectangular pendulum and cylinder pendulum. Optimal stacking section was determined by comparing and analyzing the impact simulation results.

• Coupled systems mechanics
• /
• v.11 no.4
• /
• pp.285-295
• /
• 2022

Laminated composite plates are utilized extensively in different fields of construction and industry thanks to their advantages such as high stiffness-to-weight ratio. Additionally, they are characterized by their directional properties that permit the designer to optimize their stiffness for specific applications. This paper presents a numerical analysis and optimization study of plates made of composite subjected to low velocity impact. The main aim is to identify the optimum fiber orientations of the composite plates that resist low velocity impact load. First, a three-dimensional finite element model is built using LS DYNA computer software package to perform the impact analyses. The composite plate has been modeled using solid elements. The failure criteria of Tsai-Wu's criterion have been used to control the strength of the composite material. A good agreement has been found between the predicted numerical results and experimental results in the literature which validate the finite element model. Then, an Adaptive Simulated Annealing (ASA) has been used to optimize the response of impacted composite laminate where its objective is to maximize the safety factor by varying the ply angles. The results show that the ASA is robust in the sense that it is capable of predicting the best optimal designs.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.4
• /
• pp.77-83
• /
• 2022

Occupant behaviors and body contact with vehicle interior parts are main injury mechanism in far-side collisions. In vehicle side impact accident where the crash accident occurs on the opposite side of the vehicle from the a particular occupant, it is exposed in terms of relatively larger lateral motion to interact with the opposite side of the vehicle structure. The challenge of minimizing motions of upper body and injury risk according to a direct contact is a primary occupant protection research. This study has performed a data analysis of real-world accident database extracted from the 2016~2020 CISS database and a parametric investigation of impact angles and occupant kinematics in far-side lateral and oblique impact simulations. A detailed data analysis was conducted to reveal the relationship among the accident and injury data. Database analysis and computational far-side impact results proposed the fundamental vehicle design for safety improvement in far-side collisions.

• Safety and Health at Work
• /
• v.13 no.2
• /
• pp.155-162
• /
• 2022

Background: Workers are exposed to several risks in academic laboratories due to the presence of potentially hazardous substances. The main objective of this study was to assess the prevalence of accident occurrence and associated risk factors among laboratory workers at the scientific laboratories of the public university in Lebanon and the impact of safety measures training and availability. Methods: In this observational study, a survey was conducted for one year in scientific laboratories at faculties of the public university. Results: Among the participants (N = 220), 45.0% have had accidents; the main cause was exposure to chemicals (73.7%) and more specifically by inhalation (45.4%). Females (85.9%) were more exposed to accidents than males. Laboratory workers with a master's degree, a full-time schedule, and more than ten years of experience were significantly more exposed to accidents (p < 0.05). A significant association was found between accident occurrence and training on management of hazardous products (p = 0.044), risks related to workplace (p = 0.030), eyewash and emergency shower (p < 0.001), first aid (p = 0.012), and facial protection availability (p = 0.019). In spite of the lack of safety culture and efficient training on laboratory safety, participants have shown a very good perception regarding safety measures to be applied in case of work accidents. Conclusion: Based on our findings, the prevalence of accident occurrence is elevated among lab workers at the public university. The impact of regular training on laboratory safety preventive measures is of great importance to ensure the efficiency of occupational health and safety in scientific laboratories.