• Journal of Soil and Groundwater Environment
• /
• v.10 no.2
• /
• pp.44-51
• /
• 2005

Fractional composition and mobility of some heavy metals in sediments from Okdong stream are investigated. The fractional scheme for heavy metals in the sediment was established for five chemically defined heavy metal forms as adsorbed fraction, carbonate fraction, reducible fraction, organic fraction, and residual fraction. The most abundant fraction heavy metals in the sediments is reducible and secondly abundant is organic fraction. Adsorbed fraction is minor part of the total heavy metals. Mobilization of heavy metals in the sediments from Okdong stream occur $19.8{\sim}56.7%$ of total cadmium concentrate. The most abundant fraction of the sediment metal is organic fraction in Cu, Pb metals investigated. Labile fraction of sediment metals are $0.5{\sim}48.5%$ of total Zn, $2.6{\sim}48.1%$ of total Pb, and $0.2{\sim}36.9%$ of total Cu, respectively. Most of labile fraction consists of reducible fraction for Cd, Zn, adsorbed fraction for Pb, reducible fraction for Cu, adsorbed fraction for Ni. The Mobilization of Zn and Cu is most likely to occur when oxygen depletes and that of Pb and Ni occurs when physical impact, oxygen depletion and pH reduction.

• Environmental and Resource Economics Review
• /
• v.23 no.2
• /
• pp.157-185
• /
• 2014

The Kyoto Protocol has extended its life until 2020 by the decision at COP18 in Doha, Qatar in 2012. So has the Kyoto Mechanism of CDM, JI, and ETS. Nonetheless, the sustainability of CDM projects is jeopardized by the recent rule changes in the international emissions trade market such as EU ETS and the price decrease in emission credits. In particular, the domestic CDM projects reducing non-$CO_2$ GHG emissions are being directly affected. This study examines the trend of carbon credit price change in the international market. It also examines how the rule changes in the international emissions trade market have affected domestic non-$CO_2$ CDM projects through which mechanisms. The policy implications drawn from this study is two-fold: it suggests how the government can assist the project developers in utilizing GHG emission reduction technologies and the market in promoting investment environment before the domestic ETS enters into effect in 2015; apart from possible measures within ETS, an additional measures such as bilateral carbon offset system is suggested to help the private sector reduce uncertainty in investment and increase options to choose.

• Environmental and Resource Economics Review
• /
• v.16 no.2
• /
• pp.275-311
• /
• 2007

Hydrogen energy is emphasized as a substitutable energy of carbon-based energy system in the future, since it is non-depletable and clean energy. Long term vision of Korean government on the national energy system is to promote hydrogen energy by 15% of final energy demand until 2040. This study analyzes economic impacts of hydrogen energy development employing a dynamic CGE model for Korea. Frontier technology such as hydrogen energy is featured as slow diffusion at the initial stage due to the learning effect and energy complementarity. Without government intervention, hydrogen energy would be produced upto 6.5% of final energy demand until 2040. However, if government subsidizes sales price of hydrogen energy by 10%, 20%, and 30%, share of hydrogen energy would increase 9.2%, 15.2%, and 37.7% of final energy demand. This result shows that the slow diffusion problem of hydrogen energy as frontier technology could be figured out by market incentive policy. On the other hand, production levels of transportation sector would increase while growth rate of oil and electricity sectors would decline. Household consumption would be affected negatively since increase of consumption due to the price decrease would be overwhelmed by income reduction owing to the increase of tax. Overall, GDP would not decrease or increase significantly since total production, investment, and export would increase even if household consumption declines.

• The Korean Journal of Cytopathology
• /
• v.18 no.1
• /
• pp.1-12
• /
• 2007

Approximately 70% of cervical cancers are caused by HPV types 16/18 and thus the implementation of vaccination programmes with vaccines against HPV types 16/18 will have a major impact on the incidence of cervical cancer worldwide. However, this reduction will not be seen until several decades after full implementation of such vaccination programmes since the vaccines must be given to young adolescents before exposure to the virus and women who are already sexually active are not likely to be protected. Both GSK and Merck insist that even vaccinated women must continue to participate in regular cervical screening by the most sensitive method available since the vaccine can only give protection against up to 70% of cervical cancers. It is unlikely that the current vaccines will be modified to include additional high risk HPV types in the foreseeable future. While HPV testing is highly sensitive, it is not recommended for women under 30 years of age nor for vaccinated women. Additionally, HPV testing has poor specificity. The Digene Hybrid Capture 2 test is licensed for use only in conjunction with a cytology test, not as a stand-alone test, and the high risk panel has recognised cross reactivity with low risk HPV types. None of the other HPV test methods currently commercially available are FDA approved and all must be internally validated before use. This makes comparison of test results between laboratories difficult. The most sensitive and specific screening test currently available for women of all ages is the Cytyc ThinPrep System consisting of the ThinPrep Pap Test (TPPT) and the ThinPrep Imaging System (Imager). The TPPT was the first LBC system approved by the US FDA in 1996 and there are about 4,000 processors in use worldwide. The Imager was FDA approved in 2003 and over 350 systems are in routine use, mainly in the US. 40% of TPPT in the US are processed on Imager. There is clear evidence in peer reviewed literature that the Imager increases laboratory productivity by 100% and growing evidence that Imager detects more high grade SIL than the conventional smear or manual evaluation of TPPT. This aspect is particularly important since the number of cytological abnormalities will decrease as vaccination programmes are implemented. Cytotechnologists will see fewer and fewer abnormal smears and their skills will be put at risk. By doubling throughput, Imager will allow cytotechnologists to maintain their skills.

• Fire Science and Engineering
• /
• v.29 no.2
• /
• pp.79-83
• /
• 2015

The fire accident is a representative type of disaster that can largely impact on business. Therefore, precautionary measures and rapid initial response is very important when a disaster occurs. The storage of porous combustibles is inevitable in coal yard, plywood processing industry, and others that are currently operating. Initial fire fighting of fire and identifying the ignition point in such a porous combustible storage space are so difficult that if the initial response is failed, being led to deep-seated fire, surface fire is likely to result in secondary damage. In addition, deep-seated fire can cause personal injuries and property damage due to a large amount of toxic gases and reignition. Therefore damage reduction measures is required around the storage space to handle a porous flammable. Improving the penetration performance of the concentration of the surfactant is carried out as underlying study, which is about an deep-seated fire extinguishing efficiency augmentation when using wetting agents. The porous materials used in the experiments is radiata pine wood flour, which occupies more than 75% of the domestic wood market. Fire fighting water is selected as Butyl Di Glycol (BDG), which is being used for infiltration extinguishing agent, and the experiment was carried out by producing a standard solution. The experiment was carried out on the basis of the Deep-Seated Fire Test of NFPA 18. The amount of watering, porous material to the internal amount of penetration, and runoff measurement out of the porous material was conducted. According to experimental results, as the surface tension is reduced, the surfactant concentration macroscopic penetration rate decreases, but infiltration to a porous material is shown to have growth characteristics.

• Journal of Wetlands Research
• /
• v.16 no.2
• /
• pp.173-185
• /
• 2014

Climate change has caused detrimental phenomena such as heavy rainfall which could aggravate soil erosion. Accordingly, it is needed to evaluate the groundwater recharge, baseflow, and soil erosion for the efficient management of water resources and quality. In this study, future climate change scenarios were applied to the H aean-myeon watershed which is a steep sloping watershed in South Korea to analyze groundwater recharge, baseflow, sediment. Also, the variation of groundwater recharge, baseflow, sediment was analyzed according to the change of slope (5 %). Simulated periods were divided into three terms (2013 ~ 2040 years, 2041 ~ 2070 years, 2071 ~ 2100 years). As a result of this study, average groundwater recharge and baseflow increased by 50 %, 42 %, and sediment decreased by 72 %, respectively. In these regards, the suggested method will positively contribute to hydro-ecosystem and reduction of muddy water at a steep sloping watershed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.147-154
• /
• 2014

The cable damages of the bridge structures induce very important impact on the structural safety, which implies the close monitoring of the cable damage is required to secure sustained safety of the bridges. Most usual available maintenance techniques are based on the monitoring the change of the natural frequency of the structures by damages. However, existing method are based on vibration method to calculate lateral vibration and system identification can calculate the axial stiffness using sensitivity equation by trial error method. But the frequency study by the longitudinal movement need because of the sag effect in system identification. This study proposes a new method to investigate the damage magnitudes and status. The method improves the accuracies in the magnitudes and status of damages by adopting the natural frequency of longitudinal movement. The study results have been validated by comparing them with the approximate solution of FEM. Thus, the relationship of cable damage and frequency appear with relation that the severe damage has the little frequency. If we know the real frequency we can estimate the cable damage severity using this relationship. This method can be possible the efficient management of the cable damage.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.73-84
• /
• 2016

The purpose of this study is to examine the global value chain of the global automotive industry to investigate the success factors through the example of the value chain of Hyundai Motor. It looks at the value chain of the well-known Korean automaker, Hyundai Motor, to find success factors with cases. It examines the process to build the supply chain of Hyundai Motor to analyze what impact it has on the growth of Hyundai Motor to look closely at the vertical division of labor of vehicle parts manufacturers. Korea's automobile industry has been expanding cooperation between two sectors as a multifunctional promotion focusing on electronic communications technology in machinery and technology center. Through introducing the nation's first vertical integration in the sector, Hyundai Motor has secured competitiveness of cost reduction and prestige car production. Hyundai Motor has operated and established factories in the United States, India, Turkey, the Czech Republic, Russia, and Brazil. Hyundai Motor operates 51 affiliates, such as Hyundai Mobis, by restructuring, mergers and acquisitions, and building their own vertical division of labor around it. Hyundai Motor has been overcoming dependence on foreign modules businesses and maintaining the supply value chain around Hyundai Mobis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.4
• /
• pp.729-738
• /
• 2017

With the signing of the Paris Agreement, which is the new climate change agreement at the end of 2015, it will have a great impact on Korea environmental policy. The construction industry, which accounts for 42% of Korea's total $CO_2$ emissions, has been implementing various policies to improve the environmental problems. However, it is only applying passively to other projects except eco-friendly building certification. This is because most of the eco-related systems are based on building facilities. Therefore, there is a need for a new eco - friendly design evaluation model that can be widely applied not only to architecture but also to civil engineering facilities. In this study, a new model is developed based on the existing VE model, which adds new factors to evaluate the environmental friendliness, potential environmental pollution concept and environmental risk of facilities. This model is an eco-friendly design evaluation model that enables decision makers to effectively select alternative environmental criteria at the design stage. As a result of the case analysis of the block retaining wall and the alternative retaining wall, the value of the eco - friendly value of the alternative was 1.026 times higher than the original one. If this model is used at the design stage, it is expected to contribute not only to the construction of environmentally friendly facilities but also to the reduction of carbon emissions.

• Journal of Environmental Policy
• /
• v.8 no.3
• /
• pp.27-51
• /
• 2009

This study looked for ways to carry out development projects in a sustainable manner by generating improvement plans, and focused on reviewing the status and problems associated with the environmental and ecological planning that is currently applied to new town and large-scale development projects. Improved methods were suggested based on differences between urban development and housing development projects. Based on principles set for the introduction of environmental and ecological planning, the size of the projects subject to environmental and ecological planning was set. With regard to the procedural improvements for environmental and ecological planning, nine problems were singled out from the development planning phases. Solutions were suggested by separating the problems into the site and district designation phase, development planning phase, implementation planning phase, and post-management phase based on a literature review and the opinion of experts. In consideration of improvements to the planning system, the scope of environmental and ecological planning was set after looking at information related to environmental and ecological planning, literature review, expert interviews, and the relevance of related plans. The scope of the environmental and ecological planning was divided into the overview of planning, environmental and ecological conception, conception of spatial structure and framework, and urban environment regeneration and impact reduction plans. By synthesizing the above-described results, the functions of environmental and ecological planning, development planning, and environmental assessment and their inter-relations were defined. The defined inter-relations seem likely to be developed into a form that would enable sustainable land development.