• Korean Journal of Environmental Agriculture
• /
• v.24 no.2
• /
• pp.106-116
• /
• 2005

This experiment was conducted to investigate available extraction capacity and potential mobility of heavy metal according to the distribution property and contamination level of heavy metals in soils and to suggest a reform measure of soil environment assessment methodology applied with soil quality and the official soil heavy metal test methods in domestic and foreign countries. The soils were collected from the natural forest paddy with long-term application of same type fertilizer, and paddies near metal mine and industrial complex. The post-treatment methods of soil were partial extraction, acid digestion and sequential extraction methods. For the heavy metal contents with different soil properties, it was shown that their natural forest and paddy soil were slightly low and similar to the general paddy soil, while their paddies near metal mine and industrial complex were higher than the standard level of Soil Environment Protection Act. Heavy metal concentrations in the soils with different soil properties had difference between $HNO_3\;and\;HNO_3+HCl$ extractant by US-EPA 3051a method. There were highly significant positive relationships in both two methods. It was appeared that the higher extractable concentration ratio with 0.1N-HCl to total heavy metal content with $HNO_3+HCl$ extractant the greater total heavy metal content. There were highly significant positive correlationship between total heavy metal content and extractable content with 0.1N-HCl. For extractable capacity of soil extractable solution compared to the total heavy metal content it was appeared that it extractable method with 0.1N-HCl was higher than those with EDTA and DTPA. In extractable ratio with 0.1N-HCl in the contaminated paddy soils near mine and industrial complex, it was shown that the lower soil pH, the higher total heavy metal content. The order of a potential mobility coefficient by distribution of heavy metal content with ie different typies in the soil was Cd>Ni>Zn>Cu>Pb. It could be known that contamination characteristics of heavy metals with different types of soils were affected by different heavy metal components, contamination degree and soil chemical properties, and heavy metal concentration with different extractable methods had great variations with adjacent environment. To be compared with assessment methodology of soil environment impact at domestic and foreign countries with our results, it might be considered that there was necessary to make a single analysis method based on total heavy metal content with environmental overloading concept because of various analysis methods for total heavy metal content and present analysis method with great variation according to soil environment. In spite of showing higher concentration of heavy metal with acidic digestion than the extractable method, it might be considered that there is need to be adjusted the national standard of soil heavy metal contamination.

• Journal of Intelligence and Information Systems
• /
• v.24 no.3
• /
• pp.89-117
• /
• 2018

The Korean companies are intensifying competition with not only domestic companies but also foreign companies in globalization. In this environment, it is essential activities not only for large companies but also Small and Medium Enterprises (SMEs) to get and develop the core competency. Particularly, SMEs that are inferior to resources of various aspects, such as financial resources etc., can make innovation through effective R&D investment. And then, SMEs can occupy a competency and can be survive at the environment. Conventionally, the method of "self-development" by using only the internal resources of the company has been dominant. Recently, however, R&D method through cooperation, also called "Open Innovation", is emerging. Especially SMEs are relatively short of available internal resources. Therefore, it is necessary to utilize technology and resources through cooperation with external companies(such as joint development or contract development etc.) rather than self-development R&D. In this context, we confirmed the effect of SMEs' factors on sales in Korea. Specifically, the factors that SMEs hold are classified as 'Technical characteristic', 'Company competency', and 'R&D activity' and analyzed how they influence the sales achieved as a result of R&D. The analysis was based on a two-year statistical survey conducted by the Korean government. In addition, we confirmed the influence of the factors on the sales according to the R&D method(Self-Development vs. Open Innovation), and also observed the influence change in 29 industrial categories. The results of the study are summarized as follows: First, regression analysis shows that twelve factors of SMEs have a significant effect on sales. Specifically, 15 factors included in the analysis, 12 factors excluding 3 factors were found to have significant influence. In the technical characteristic, 'imitation period' and 'product life cycle' of the technology were confirmed. In the company competency, 'R&D led person', 'researcher number', 'intellectual property registration status', 'number of R&D attempts', and 'ratio of success to trial' were confirmed. The R&D activity was found to have a significant impact on all included factors. Second, the influence of factors on the R&D method was confirmed, and the change was confirmed in four factors. In addition, these factors were found that have different effects on sales according to the R&D method. Specifically, 'researcher number', 'number of R&D attempts', 'performance compensation system', and 'R&D investment' were found to have significant moderate effects. In other words, the moderating effect of open innovation was confirmed for four factors. Third, on the industrial classification, it is confirmed that different factors have a significant influence on each industrial classification. At this point, it was confirmed that at least one factor, up to nine factors had a significant effect on the sales according to the industrial classification. Furthermore, different moderate effects have been confirmed in the industrial classification and R&D method. In the moderate effect, up to eight significant moderate effects were confirmed according to the industrial classification. In particular, 'R&D investment' and 'performance compensation system' were confirmed to be the most common moderating effect by each 12 times and 11 times in all industrial classification. This study provides the following suggestions: First, it is necessary for SMEs to determine the R&D method in consideration of the characteristics of the technology to be R&D as well as the enterprise competency and the R&D activity. In addition, there is a need to identify and concentrate on the factors that increase sales in R&D decisions, which are mainly affected by the industry classification to which the company belongs. Second, governments that support SMEs' R&D need to provide guidelines that are fit to their situation. It is necessary to differentiate the support for the company considering various factors such as technology and R&D purpose for their effective budget execution. Finally, based on the results of this study, we urge the need to reconsider the effectiveness of existing SME support policies.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.5
• /
• pp.41-54
• /
• 2012

The weathering process of rocks leads to the reduction of geotechnical bearing capacity. The weathering of granite is frequently used to refer to the degradation of geotechnical property in the design and construction of infra-structure. In this study, the range of values of CIA (chemical index of alteration) and the change of mineral compositions by weathering have been analysed with igneous rock, which covers 45.5% in South Korean territory. Several weathering indices were studied for various rocks found in Korea and significant relationships between different indices were delineated via statistical analysis. The applicability of CIA was found to be the most significant among all weathering indicies. The composition of illite, the secondary weathering residual, generally increases for the felsic rock, and swelling clay material is not included. The weathering of felsic rock will follow a sequential process, starting from bed rock, illite, and chlorite to kaoline. The mafic rock will show weathering process, from bed rock, smectite, and chlorite to kaoline. The intermediate rocks such as andesite and tuff will show similar weathering procedure and the composition of kaoline, chlorite, and smectite tends to increase more than that of illite when the mafic rock is dominated. This means the increase of rock material which has high CEC (cation exchange capacity) during secondary weathering process. However, the characteristics of a specific rock cannot be completely analyzed using merely CIA, since it is exclusively based on chemical composition and corresponding alteration. The CIA can be used to quantify the weathering process in a limited range, and further considerations such as rock composition, strength characteristics will be required to configure the comprehensive weathering impact on any specific region.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.2
• /
• pp.118-127
• /
• 2013

In this study, Seongbuk-dong historical & cultural resources of the surrounding landscape were analyzed by the visual characteristics of the landscape adjective analysis. Research was investigate to the relationship between visual characteristics and preferences and Research in the following way. Selected historical and cultural resources in the surrounding area are located in Seongbuk-dong 30 slices the survey was conducted. Landscape preference factors to identify the scale of 16 adjectives and then factor analysis was conducted. Lastly, Analysis of variance and regression analysis were conducted in order to determine the impact of the last image factors on visual preferences. Firstly, The results can be summarized as follows. Officer for 30 pictures appear in Seongbuk-dong in the historical and cultural resources, and distributed around the target preference for the 16 adjectives analysis yielded an average result of overall preference were analyzed and that is a 3.72 average. In these photos, VP8, VP9, VP10, VP12, VP15; 4.5 points more than one order higher. The reason is limit of altitude by the Seoul landscape plan for the historical and cultural resources around. It also judged important reason that history and Culture are in harmony with the surrounding cultural property in the conservation area. Secondly, Important factors are factor 1(aesthetic factors), factor 2(cultural factors), factor 3(physical factors) and three factors could be identified. Results of the analysis of variance and regression analysis about factors for visual preference and image shows value of psychological factor is most significant to explain for nearby history &cultural resources of Seongbuk-dong of scenery around. As a result, the state can not view historical and cultural resources for analysis will be located in a residential area near the historical and cultural resources for aesthetic factors. Third, the negative side of the argument is a residential area which is not arranged surrounding landscape maintenance of historical and cultural resources has emerged. Historical and cultural resources in harmony with the phenomena of the physical, cultural, and aesthetic characteristics of the three areas is a positive factor in the high incidence. Factors from that are expressed in this study by analyzing multi-dimensional analysis to derive a factor to be considered important in the management of historical and cultural resources, landscape around is required.

• The Korean Journal of Air & Space Law and Policy
• /
• v.1
• /
• pp.47-85
• /
• 1989

The Fundamental purpose of the Warsaw Convention was to establish uniform rules applicable to international air transportation. The emphasis on the benefits of uniformity was considered important in the beginning and continues to be important to the present. If the desire for uniformity is indeed the mortar which holds the Warsaw system together then it should be possible to agree on a worldwide liability limit. This liability limit would not be so unreasonable, that it would be impossible for nations to adhere to it. It would preclude any national supplemental compensation plan or Montreal Agreement type of requirement in any jurisdiction. The differentiation of liability limits by national requirement seems to be what is occurring. There is a plethora of mandated limits and Montreal Agreement type 'voluntary' limits. It is becoming difficult to find more than a few major States where an unmodified Warsaw Convention or Hague Protocol limitation is still in effect. If this is the real world in the 1980's, then let the treaty so reflect it. Upon reviewing the Warsaw Convention, its history and the several attempts to amend it, strengths become apparent. Hijackings of international flights have given rise to a number of lawsuits by passengers to recover damages for injuries suffered. This comment is concerned with the liability of an airline for injuries to its passengers resulting from aviation terrorism. In addition, analysis is focused on current airline security measures, particularly the pre-boarding screening system, and the duty of air carriers to prevent weapons from penetrating that system. An airline has a duty to exercise a high degree of care to protect its passengers from the threat of aviation terrorism. This duty would seemingly require the airline to exercise a high degree of care to prevent any passenger from smuggling a weapon or explosive device aboard its aircraft. In the case an unarmed hijacker who boards having no instrument in his possession with which to promote the hoax, a plaintiff-passenger would be hard-pressed to show that the airline was negligent in screening the hijacker prior to boarding. In light of the airline's duty to exercise a high degree of care to provide for the safety of all the passengers on board, an acquiescene to a hijacker's demands on the part of the air carrier could constitute a breach of duty only when it is clearly shown that the carrier's employees knew or plainly should have known that the hijacker was unarmed. A finding of willful misconduct on the part of an air carrier, which is a prerequisite to imposing unlimited liability, remains a question to be determined by a jury using the definition or standard of willful misconduct prevailing in the jurisdiction of the forum court. Through the willful misconduct provision of the Warsaw Convention, air carrier face the possibility of unlimited liability for failure to implement proper preventive precautions against terrorist. Courts, therefore, should broadly construe the willful misconduct provision of the Warsaw Convention in order to find unlimited liability for passenger injuries whenever air carrier security precautions are lacking. In this way, the courts can help ensure air carrier safety and prevention against terrorist attack. Air carriers, therefore, would have an incentive to increase, impose and maintain security precautions designed to thwart such potential terrorist attacks as in the case of Korean Air Lines Flight No.858 incident having a tremendous impact on the civil aviation community. The crash of a commercial airliner, with the attending tragic loss of life and massive destruction of property, always gives rise to shock and indignation. The general opinion is that the legal system could be sufficient, provided that the political will is there to use and apply it effectively. All agreed that the main responsibility for security has to be borne by the governments. I would like to remind all passengers that every discovery of the human spirit may be used for opposite ends; thus, aircraft can be used for air travel but also as targets of terrorism. A state that supports aviation terrorism is responsible for violation of International Aviation Law. Generally speaking, terrorism is a violation of international law. It violates the soverign rights of the states, and the human rights of the individuals. I think that aviation terrorism as becoming an ever more serious issue, has to be solved by internationally agreed and closely co-ordinated measures. We have to contribute more to the creation of a general consensus amongst all states about the need to combat the threat of aviation terrorism.

• Journal of dental hygiene science
• /
• v.16 no.1
• /
• pp.53-61
• /
• 2016

Eating supports to gain energy and nutrition and improves quality of life. Ageing affects the food intake ability due to loss of natural teeth and the progressive muscle degeneration. Our objective was to investigate how the food intake ability (FIA) and the remaining teeth could influence on oral health related quality of life in the elderly. This study was performed with 503 elderly subjects living in Daejeon, Korea. The questionnaire with the FIA with 30 Korean food and Oral Health Impact Profile 14 (OHIP-14) and oral examination were surveyed. The five groups according to cluster analysis of FIA had the different numbers of remaining teeth and functional posterior teeth with opposing teeth or prosthesis significantly: group 1, $21.78{\pm}8.27$ and $2.80{\pm}2.63$; group 2, $16.75{\pm}7.87$ and $2.16{\pm}2.44$; group 3, $14.68{\pm}9.77$ and $1.73{\pm}2.30$; group 4, $9.93{\pm}8.13$ and $0.78{\pm}1.68$; group 5, $10.18{\pm}8.37$ and $0.51{\pm}1.22$. The more foods the subjects could masticate, the better oral health related quality of life they had. The medium FIA, soft FIA and the number of remaining teeth could explain 46% of OHIP-14, but hard FIA could not in the multiple regression model. We suggested to develop the oral health program for the elderly to be able to eat the food with medium physical property at least be helpful to improve oral health related quality of life.

• Korean Journal of Weed Science
• /
• v.31 no.1
• /
• pp.41-48
• /
• 2011

This survey of weed population by different soil moisture with paddy-upland rotation was conducted to investigate information on weed flora and its ecology between two years. Weed species were assessed in April : 2009, 2010. Soil samples were taken from each study plot to assess the impact soil moisture on the occurrence and abundance of dominance weed species. Soil water of poorly drained field ranged from 10.2~18.2% more than 11.8~14.3% of somewhat poorly drained field. Weeds of fields composed of 19 species belonging to 12 families. Among 12 families, 6 weed species belonged to Compositae (31.6%) were the biggest family, Cruciferae were 2 species (10.5%), and Rubiaceae were 2 species (10.5%), respectively. Youngia japonica had the highest summed dominance ratio(SDR) (97.0%) and followed by Conyza canadensis (92.1%), Galium spurium (35.3%) and Hemistepta lyrata (28.4%) of somewhat poorly drainage in 2009. Artemisia princeps the highest SDR (100%) and followed by Stellaria alsine(55.2%), Y. japonica (38.3%) and Nasturtium officinale (28.5%) of poorly drainage in 2009. And, Stellaria alsine had the highest SDR (86.8%) and followed by Alopecurus aequalis (77.7%), Astragalus sinicus (68.7%) and Y. japonica (46.3%) of somewhat poorly drainage in 2010. S. alsine the highest SDR (93.7%) and followed by A. aequalis (78.6%), Nasturtium officinale (31.3%) and Y. japonica (30.4%) of poorly drainage in 2010. Simpson's index was calculated to 0.12~0.23, which showed that weed occurrence with different soil moisture in paddy-upland rotation and between years was various. Similarity coefficient between years was 43.0% (2009) and 74.2% (2010), which indicate a low diversity because of the moisture in the agro-ecosystem.

• Asia pacific journal of information systems
• /
• v.20 no.1
• /
• pp.127-140
• /
• 2010

The benefit that a consumer derives from the use of a good often depends on the number of other consumers purchasing the same goods or other compatible items. This property, which is known as network externality, is significant in many IT related industries. Over the past few decades, network externalities have been recognized in the context of physical networks such as the telephone and railroad industries. Today, as many products are provided as a form of system that consists of compatible components, the appreciation of network externality is becoming increasingly important. Network externalities have been extensively studied among economists who have been seeking to explain new phenomena resulting from rapid advancements in ICT (Information and Communication Technology). As a result of these efforts, a new body of theories for 'New Economy' has been proposed. The theoretical bottom-line argument of such theories is that technologies subject to network effects exhibit multiple equilibriums and will finally lock into a monopoly with one standard cornering the entire market. They emphasize that such "tippiness" is a typical characteristic in such networked markets, describing that multiple incompatible technologies rarely coexist and that the switch to a single, leading standard occurs suddenly. Moreover, it is argued that this standardization process is path dependent, and the ultimate outcome is unpredictable. With incomplete information about other actors' preferences, there can be excess inertia, as consumers only moderately favor the change, and hence are themselves insufficiently motivated to start the bandwagon rolling, but would get on it once it did start to roll. This startup problem can prevent the adoption of any standard at all, even if it is preferred by everyone. Conversely, excess momentum is another possible outcome, for example, if a sponsoring firm uses low prices during early periods of diffusion. The aim of this paper is to analyze the dynamics of the adoption process in markets exhibiting network effects by focusing on two factors; switching and agent heterogeneity. Switching is an important factor that should be considered in analyzing the adoption process. An agent's switching invokes switching by other adopters, which brings about a positive feedback process that can significantly complicate the adoption process. Agent heterogeneity also plays a important role in shaping the early development of the adoption process, which has a significant impact on the later development of the process. The effects of these two factors are analyzed by developing an agent-based simulation model. ABM is a computer-based simulation methodology that can offer many advantages over traditional analytical approaches. The model is designed such that agents have diverse preferences regarding technology and are allowed to switch their previous choice. The simulation results showed that the adoption processes in a market exhibiting networks effects are significantly affected by the distribution of agents and the occurrence of switching. In particular, it is found that both weak heterogeneity and strong network effects cause agents to start to switch early and this plays a role of expediting the emergence of 'lock-in.' When network effects are strong, agents are easily affected by changes in early market shares. This causes agents to switch earlier and in turn speeds up the market's tipping. The same effect is found in the case of highly homogeneous agents. When agents are highly homogeneous, the market starts to tip toward one technology rapidly, and its choice is not always consistent with the populations' initial inclination. Increased volatility and faster lock-in increase the possibility that the market will reach an unexpected outcome. The primary contribution of this study is the elucidation of the role of parameters characterizing the market in the development of the lock-in process, and identification of conditions where such unexpected outcomes happen.

• Korean Journal of Environment and Ecology
• /
• v.32 no.6
• /
• pp.639-645
• /
• 2018

The objective of the study is to analyze the impact of zone adjustment by comparing the changes from 2011 to 2018 of social and environmental factors such as the special-purpose area, actual construction activities including building development, land use environment, and officially assessed individual land price in the areas released from the National Park Zone during the second National Park Zone adjustment during 2010 to 2011 with the social and environmental factors in the areas that remained in the National Park Zone during the same period. We intended to investigate the problems of the second National Park Zone adjustment and explore alternative implications for the third National Park Zone adjustment. As for the special-purpose area, 80.4% of the released areas were converted to planned, production, and conservation area while 15.6% changed to the agricultural area, and 4.0% remained as the natural environmental conservation area. Regarding the change in building development scale, the average size of construction in the released area since 2011 was $106m^2$ while that in the retained areas was $91m^2$. For the land use environment, the rate of change from the natural area to developed area was 1.9% in the released area and 0.7% in the retained area. The officially assessed individual land price increased by 11,911 won in the released area and 4,413 won in the retained area. Although both areas showed an increase in the land price, the difference of officially assessed individual land prices was about 2.5 times. The problem concerning the private property rights of local residents in the national parks is still a challenge, but the second National Park Zone adjustment has resolved the problem significantly. Accordingly, it is necessary to offer the benefits for the residents in the national park area by analyzing the park zoning and park facility planning to present the rational alternative. It is also necessary to establish a support system that encourages the collaborative cooperation between the park authority and residents and assures that the residents to have pride in the national park.

• Food Engineering Progress
• /
• v.23 no.3
• /
• pp.193-199
• /
• 2019

This study aimed to investigate the impact of protease treatments on the yield of rice starch (RST) from frozen rice flours, and to compare the physicochemical properties of RST by alkaline steeping (control) and enzymatic isolation (E-RST) methods. Although the yield of E-RST, prepared according to conditions designed by the modified 23 complete factorial design, was lower than the control, the opposite trends were observed in its purity. E-RST (RST1, isolated for 8 h at 15℃ with 0.5% protease; RST2, isolated for 24 h at 15℃ with 1.5% protease; RST3, isolated for 24 h at 15℃ with 0.5% protease) with the yields above 50% were selected. Amylose contents did not significantly differ for the control and RST2. Relative to the control, solubilities were higher for all E-RST, but swelling power did not significantly differ for E-RST except for RST1. Although all E-RST revealed higher gelatinization temperatures than the control, the reversed trends were found in the gelatinization enthalpy. The pasting viscosities of all E-RST were lower than those of the control. Consequently, the enzymatic isolation method using protease would be a more time-saving and eco-friendly way of preparing RST than the alkaline steeping method, even though its characteristics are different.