• Restorative Dentistry and Endodontics
• /
• 제29권3호
• /
• pp.233-238
• /
• 2004

The purpose of this study was to evaluate the effect of immediate or delayed composite resin filling on dentinal microtensile bond strength (${\mu}TBS$) after applied the adhesive. The coronal dentin of human third molars was exposed. Single-Bond or One-Step was applied on the dentin surfaces. and composite resin were constructed immediately (group 1) or 5min., 10min., 15min., 20min. and 30min. (groups 2-6) after an adhesive was applied. The specimens were sectioned and made bar-shaped. Each surface area of them was about $1\textrm{mm}^2$. The ${\mu}TBS$ test was performed by EZ test. The results were analysed by One-way ANOVA and Tukey's test at 95% significance level. The results suggested that the ${\mu}TBS$ of Single-Bond to dentin was decreased when the composite resin was constructed 20min. and 30min. after Single-Bond was applied. But the ${\mu}TBS$ of One-Step was not affected by delayed composite resin filling.

• Restorative Dentistry and Endodontics
• /
• 제36권5호
• /
• pp.419-424
• /
• 2011

연구목적: 임상에서 주로 사용되는 가봉재가 레진 코팅된 상아질과 레진 인레이간 결합력에 미치는 영향을 밝히고, 지연 상아질 봉쇄법과 즉시 상아질 봉쇄법의 접착에 대한 효과를 비교 평가하고자 본 연구를 시행하였다. 연구 재료 및 방법: ZOE로 임시 가봉한 후 상아질 접착제로 지연 상아질 봉쇄법을 이용한 군을 1군, 즉시 상아질 봉쇄법을 이용하고 ZOE로 가봉한 군을 2군, 즉시 상아질 봉쇄법을 이용하고 Dycal로 가봉한 군을 3군, 즉시 상아질 봉쇄법을 이용하고 레진계열의 임시 가봉재로 가봉한 군을 4군으로 분류하였다. 각 그룹에서 가봉재를 제거하고 미리 제작한 레진 인레이를 와동에 합착한 후 근원심으로 절단하여 미세인장 결합 강도를 측정하였다. 결과: 1군에서 가장 낮은 결합력, 4군에서 가장 큰 결합력 나타내었다(p < 0.01). ZOE로 임시 가봉을 한 경우 즉시 상아질 봉쇄법이 지연 상아질 봉쇄법에 비해 결합력이 컸다(p < 0.01). 결론: 레진 인레이의 상아질 접착시 지연 상아질 봉쇄법보다 즉시 상아질 봉쇄법이 권고되며, 레진 계열의 임시 가봉재가 가장 우수한 결과를 보였다.

• 대한소아치과학회지
• /
• 제24권1호
• /
• pp.82-94
• /
• 1997

For the purpose of establishing the most appropriate method of bonding between glass ionomer liners and composite resin and comparing the materials for sandwich technique, an experiment was performed to measure the shear bond strengths between the two with the variables in the surface treatment of liners and elapsed time till composite buildup. Materials used were Vitrebond and Fuji II LC, each as the restorative and liner respectively, and each group was subdivided by surface treatment (acid etching and sandblasting) and time elapsed from GIC filling to composite buildup (immediately, 1 day, 7 days), consisting 12 groups as a whole. Each subgroup was composed of 10 specimens and the shear bond strength between GIC liners and composite resin was measured under UTM and analyzed. The result were as follows: 1. The shear bond strength between two materials was highest when initially filled Fuji II LC was sandblasted after 1 days and composite built-up (Group FS1). And the lowest value was found when GIC was acid-etched after 7 days and composite built-up (Group FE7). Significant difference was found between the two groups. (P<0.01) 2. In regard of surface treatment of GI liners, acid-etched group (VE) showed higher bond strength than sandblasted group (VS) for Vitrebond. But, the reverse was true for Fuji II LC. (P<0.05) 3. In regard to the time elapsed from GI filling to composite buildup, the group of 1 day elapse showed relatively higher strength for Vitrebond. On the contrary, immediate buildup group (FE0) was stronger for acid-etched group and 1 day elapse group(FS1) was higher for sand-blasted group in Fuji II LC. (P<0.05)

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.435-445
• /
• 2000

The purpose of this study was to compare the leakage of four different obturation techniques in conjunction with immediate apical barrier of ${\beta}$-tricalcium phosphate(TCP) in teeth with open apex. Eighty single-rooted human premolar teeth were prepared and sectioned horizontally, so maximum diameter in apex was 4mm. Apical defects that were similar to open apex, were created with #1/2 round bur and SF104R bur. The apical foramen were opened to a size 80 file extended 3mm beyond the apex. The teeth were placed into the oasis block soaked saline to simulate periapical tissue often associated with pulpless teeth and received apical barriers consisting of TCP followed by obturation using lateral condensation technique, vertical condensation technique, continuous wave technique and thermoplasticized gutta-percha injection technique. Two unobturated teeth served as positive and negative controls. Teeth were immersed in resorcinol-formaldehyde resin for S days at $4^{\circ}C$, and the resin was allowed to polymerize completely for 4 days at room temperature. Teeth were then sectioned horizontally at 1.5mm(level 1), 2.5mm(level 2) and 3.5mm(level 3) from the apex, and examined under a stereomicroscope at ${\times}40$ magnification. The photographs were taken at ${\times}40$ magnification of the filling in each level and scanned. The leakage length in tooth/resin interface was measured at each of the three levels. Each ratio of leakage was obtained by calculating the ratio of the leakage length of canal wall infiltrated with resin to the total length of the canal and was analyzed statistically(One-way ANOVA and Scheffe test). The result were as follows : 1. At the level 1, there was the least leakage in the thermoplasticized gutta-percha injection technique group(group 4), but there was statistically significant(p<0.05). 2. At the level 2, there was the least leakage in the thermoplasticized gutta-percha injection technique group(group 4), and the most leakage in the continuous wave technique group(group 3). There was statistically significant difference between the thermoplasticized gutta-percha injection technique group and the continuous wave technique group(p<0.05). 3. At the level 3, there was the least leakage in the thermoplasticized gutta-percha injection technique group(group 4), but there were no statistically significant differences between other groups(p>0.05). These results suggest that thermoplasticized gutta-percha injection technique which had 1mm apical gutta-percha matrix after the formation of TCP apical barrier, can demonstrate favorable apical sealing.

• 대한소아치과학회지
• /
• 제27권2호
• /
• pp.256-261
• /
• 2000

파절의 종류는 치관파절 치근파절, 동시에 나타난 치관-치근파절이 있고 치수노출에 따라 단순파절과 복잡파절로 나뉜다. 치아파절이 치은 연하로 침범하여 치아장축을 따라 나타난 경우나 치근의 1/3 이상을 넘어선 경우 발치가 원칙이다. 그러나 치근쪽 파절편을 교정적으로 정출시켜서 수복시켜 주는 방법과 인위적으로 발치하여 적절하게 수복 가능한 위치로 재식 시켜주는 방법을 선택적으로 이용할 수 있다. 본 증례에선 치아외상으로 상악 중절치가 치관-치근 파절된 혼합치열기의 환아에서 의도적 재식술을 이용하여 발치 후 즉일 근관치료와 역충전 후 레진수복을 시행하여 치료하였기에 보고하는 바이다.

• 치위생과학회지
• /
• 제21권4호
• /
• pp.243-250
• /
• 2021

Background: Endodontic sealers or their toxic components may become inflamed and lead to delayed wound healing when in direct contact with periapical tissues over an extended period. Moreover, an overfilled sealer can directly interact with adjacent tissues and may cause immediate necrosis or further resorption. Therefore, the treatment outcome conceivably depends on the endodontic sealer's biocompatibility and osteogenic potential. This study aimed to evaluate the cell viability and osteogenic effects of four different sealers in osteoblastic cells. Methods: AH Plus (resin-based sealer), Pulp Canal Sealer EWT (zinc oxide-eugenol sealer), BioRoot RCS (calcium silicate-based sealer), and Well-Root ST (MTA-based calcium silicate sealer) were mixed strictly according to the manufacturer's instructions, and dilutions of sealer extracts (1/2, 1/5 and 1/10) were determined. Cell viability was measured using the water-soluble tetrazolium-8 (WST-8) assay. Differentiation was assessed by alkaline phosphatase (ALP) activity and mineralized nodule formation by Alizarin Red S staining. Results: The cell viability of the extracts derived from the sealers excluding Well-Root ST was concentration dependent, with sealer extracts having the least viability at a 1/2 dilution. At sealer extract dilution of 1/10, the test groups showed the same survival rate as that control group, with the exception of BioRoot RCS. Among all experimental groups, BioRoot RCS showed the highest cell viability after 48 hours. The ALP activity was significantly higher in a concentration-dependent manner. Furthemore, all four materials promoted ALP activity and mineralized nodule formation compared to the control at 1/10 dilutions. Conclusion: This is the first study to highlight the differences in biological activity of these four materials. These results suggest that the composition of root canal sealers appears to alter the form of biocompatibility and osteoblastic differentiation.