• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.891-894
• /
• 2002

We studied characteristics of polyimide (PI) about Liquid Crystal on Silicon (LCOS) microdisplay. In order to compare two kinds of PI and choose one PI, we measured some items. First, we measured thermal imidization of SE-7492, SE-5291 (Nissan) PI using FT-IR. The results of thermal imidization are same 85%for SE-7492 and 86% for SE-5291. The second, we measured voltage-holding ratio (VHR) of LCOS imager using two kinds PI and one liquid crystal (LC) that is a mixture developed by Merck. The third, we measured contrast ratio (C/R) of LCOS imager using function generator from ov to 4V. The results of VHR and C/R are higher LCOS imager using SE-7492 than LCOS imager using SE-5291. And last we measured response time and the result is same two types LCOS Imagers. So, we choose PI of LCOS imager and concluded that LC is much better matched of PI using SE-7492.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.158-161
• /
• 2006

Recently the application of plastic optical fiber (POF) in automotives and planes demands the heat-resistant and high refractive index con materials. We synthesized polyglutarimides (PGIs) via imidization of PMMA with primary amines under high pressure and high temperature and investigated thermal and optical properties by varying the molar ratio of amines and the type of amines (ethyl amine vs. isopropyl mine). The degree of imidization was calculated based on the peak intensity in $^1H$ NMR and FTIR. We found that the glass transition temperature $(T_g)$ of PGIs increased over $30^{\circ}C$ compared to the traditional core materials in POF, PMMA, and they are stable up to $300\sim400^{\circ}C$. PGIs anthesized with ethyl mine show the better heat resistance than those with isopropyl amines. Additionally, they show the comparable transparency and higher refractive index than PMMA. It implies that they can be utilized as the excellent photo-efficient and heat-resistant core materials in POF.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.8
• /
• pp.866-870
• /
• 2004

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. The NLC pretilt angles on thin plastic substrates generated higher than that on glass substrate. Also, EO characteristics of the TN-LCD with a rubbed PI surface based on polymer substrate are almost the same as that of the TN-LCD with a rubbed PI surface based on glass. However, the transmittances of the TN-LCD with a rubbed PI surface based on polymer is less than that with a rubbed PI surface based on g1ass.

• Macromolecular Research
• /
• v.11 no.3
• /
• pp.172-177
• /
• 2003

Biphenyltetracarboximide-phenylene diamine polyimide/silica-titania ternary hybrid composites were Prepared by thermal imidization and sol-gel reaction. Fluorescence spectroscopic, scanning electron microscopy, and atomic force microscopy studies revealed that the addition of small amount of titania showed profound effects on the microstructure and photophysical behaviors of polyimide/silica hybrid composites, when the content of silica-titania mixture was small or when the ratio of silica to titania in the mixture was high.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.227-227
• /
• 2006

It was attempted to synthesize polyimides from PPMDA and 3FPPMDA with mDAPPO/pPDA in order to afford CTE of 17ppm and adhesion property of 80g/mm, besides high Tg (>$300^{\circ}C$), good thermal stability (>$500^{\circ}C$), low water absorption and good solubility. The polyimides were prepared via a conventional two-step process; preparation of poly(amic-acid), followed by solution imidization by refluxing in NMP with o-DCB and the molar ratio of mDAPPO/pPDA was varied. The polyimides were characterized by FT-IR, NMR, DSC and TGA. In addition, intrinsic viscosity, solubility and coefficient of thermal expansion (CTE) were also measured.

• Electrical & Electronic Materials
• /
• v.9 no.2
• /
• pp.180-187
• /
• 1996

The use of preformed copolymers and their cross-linking have been attempted in order to improve the intrinsic fragility of monolayers and Langmuir-Blodgett (LB) films and to make their technological applications. It has shown that an imidization followed a polyion-complexation can stabilize the LB films against heat and solvents. And, when the polymer structure was properly designed, concurrent removal of the alkyl tails together with imide formation could be accomplished. In this paper, the monolayers of the polymers which were polyion-complexed with PAA at the air-water interface can be transferred onto solid substrates such as porous fluorocarbon membranes filter and quartz crystal microbalance. The properties of the monolayers and the LB films will be discussed by .pi.-A isotherms, FT-IR, DSC, deposition ratio, QCM, and SEM. In addition, it was attempted to investigate the response characteristics of polymer LB films to the organic gases by the use of QCM.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.375-380
• /
• 2002

Diamines (p-phenylenediamine , m-phenylenediamine , and n-hexamethylenediamine) were intercalated into sodium montmorillonite for the further reaction with the anhydride end groups of polyamic acid. The anhydride terminated polyamic acid was synthesized using a mole ratio of 4,4'-oxydianilline : 1,2,4,5-benzene tetracarboxylic dianhydride = 1.50 : 1.53. The modified montmorillonite was reacted with polyamic acid terminated with anhydride group in N-methyl-2-pyrrolidone (polyamic acid/clay nanocomposite). After imidization, thin films of the polyimide/clay nanocomposite were prepared. From the results of XRD and TEM, we found that mono layered silicates were dispersed in polyimide matrix and those resultants were exfoliated nanocomposites. Mechanical properties of exfoliated polyimide nanocomposite were better than both those of pure polyimide and those of intercalated polyimide nanocomposite.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.254-262
• /
• 2001

Epoxy resin based upon the N,N'-diglycidylaniline which is widely used in optic, electronic and composite material. We modified this epoxy resin with poly(amic acid) (PAA) that is a precursor of polyimide. To improve the mechanical property we controlled PAA content and imidization ratio. PI-modified epoxy blends were prepared for the formation of IPN structure. The possible reaction in the epoxy resin/PAA blends were investigated by FT-IR and inherent viscosity techniques. Thermal properties are measured by TGA, DSC, and TMA. Mechanical properties are measured by UTM and impact test machine. Morphology is investigated by SEM. Thermal stability improved with increasing the content of PAA in blends. As the content of PAA increases in blend, the glass transition temperature and thermal expansion coefficient decreases. Increasing impact strengths in J/m in the range of 920∼2412 were observed in blends. The PAA segment may act as a toughening agent in the epoxy networks, thus contributing the impact strength improvement of the blends.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.478-485
• /
• 2012

A series of transparent polyimide (PI) nanocomposite films was synthesized from bicyclo(2,2,2)oct-7-ene-2,3,5,6-tetracarboxylic dianhydride (BTDA) and 1,3-bis(3-aminophenoxy)benzene (BAPB) with various organoclay contents via solution intercalation polymerization to poly(amic acid)s, followed by thermal imidization. Varying organoclay loading in a range of 0 to 1.5 wt% produced variations in the optical transparency, morphology, and oxygen barrier property of the hybrids. An optimum oxygen barrier property was observed for the hybrids containing 1.0 wt% Cloisite 30B; these properties were degraded gradually by further increases in the clay content. The PI hybrid films were found to exhibit excellent optical transparency and almost no color. However, the transparency of the hybrid films decreased slightly with increasing organoclay content. Transparent PI hybrid films containing 1.0 wt% Cloisite 30B were stretched equi-biaxially with various stretching ratios in a range of 100-140% to investigate their optical transparency and oxygen permeability in detail; the variations of clay dispersion and morphology were also determined as a function of equi-biaxial stretching ratio. PI hybrid films with ${\geq}120%$ stretching were found to contain homogeneously dispersed clay in the polymer matrix and exfoliated nanocomposites. The highest barrier to oxygen permeation was found at an equi-biaxial stretching ratio of 130%.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.275-280
• /
• 2012

Poly(amic acid)s were successfully synthesized from 1,4-bis(4-aminophenoxy)benzene (1,4-APB) or 2,2-bis[4-(4-aminophenoxy)phenyl]hexafluoropropane (HFBAPP) with pyromellitic dianhydride (PMDA), 3,3'-4,4'-benzopenonetetracarboxylic dianhydride (BPDA) and $p$-phenylenediamine ($p$-PDA) and then they were effectively converted into polyimide films by thermal imidization. The chemical structure and thermo-mechanical properties of polyimide films were examined using Fourier transform infrared spectroscopy (FTIR), thermo-gravimetric analyzer (TGA), thermo-mechanical analyzer, dynamic mechanical analyzer (DMA) and universal tensile machine (UTM). The moisture absorption, thermal and mechanical properties of polyimide films decreased with increasing the amount of 1,4-APB and HFBAPP. The polyimide films using HFBAPP showed lower properties than that of 1,4-APB at the same ratio, but it displayed better thermal properties and lower moisture absorption at the similar coefficient of thermal expansion (CTE) with a copper. On the basis of our finding, it is concluded that 4-component polyimide films could be utilized for base films for flexible copper clad laminates (FCCL) of flexible printed circuit boards.