• 한국방사선학회논문지
• /
• 제11권4호
• /
• pp.253-262
• /
• 2017

슬관절의 측면 촬영 검사방법에서 기존에 권고되고 있는 정 측면 자세에서 중심 X선의 입사 각도를 머리 쪽 $5{\sim}7^{\circ}$로 조정하는 방법을 검사방법 A, 중심 X선이 슬관절 강을 향해 검사대의 수평면과 수직으로 입사하는 방법을 검사방법 B, 경골 원위부(distal tibia)의 바깥 면(lateral side)을 방사선 투과성 물질(radiolucent materials)로 보상한(compensated) 상태에서 중심 X선을 관절 강에 수직 입사하는 방법을 검사방법 C로 분류하였다. 연구 대상자들을 분류하여 3가지 검사방법을 각각 시행한 후, 검사영상에서 관절 강 거리(joint space distance)와 양측과의 거리(both condyle distance)를 정량적 지표로 설정하여 이를 측정하고 비교하였다. 또한 각 검사방법의 편의성을 검사자(Practician)들을 대상으로 설문조사를 통해 확인하였다. 정량적 지표의 측정 결과 검사방법 A와 C는 통계적 분석 결과 특징적인 차이가 없었지만(p>0.05), 검사 방법 B는 A와 C 모두에서 차이를 보였다(p<0.05). 검사방법의 편의성을 평가한 결과, 검사방법 A가 모든 항목에서 검사방법 B, C 보다 상대적으로 점수가 낮게 평가되었고, 검사방법 B와 C는 근소한 차이로 B가 높은 평가를 받았다. 본 연구를 통해 제안한 간단한 보조기구(support device)를 이용한 슬관절 측면 촬영 검사방법은 다소 복잡한 준비과정 없이도 기존의 권고 방법과 큰 차이가 없는 관절 강의 묘사가 가능하고, 검사의 진행과정에서 검사자의 편의성을 증가시킬 수 있었다.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2204-2212
• /
• 2022

Recently, the demand for alpha imaging detectors for quantifying the distributions of alpha particles has increased in various fields. This study aims to reconstruct a high-resolution image from an alpha imaging detector by applying a super-spatial resolution method combined with the maximum-likelihood expectation maximization (MLEM) algorithm. To perform the super-spatial resolution method, several images are acquired while slightly moving the detector to predefined positions. Then, a forward model for imaging is established by the system matrix containing the mechanical shifts, subsampling, and measured point-spread function of the imaging system. Using the measured images and system matrix, the MLEM algorithm is implemented, which converges towards a high-resolution image. We evaluated the performance of the proposed method through the Monte Carlo simulations and phantom experiments. The results showed that the super-spatial resolution method was successfully applied to the alpha imaging detector. The spatial resolution of the resultant image was improved by approximately 12% using four images. Overall, the study's outcomes demonstrate the feasibility of the super-spatial resolution method for the alpha imaging detector. Possible applications of the proposed method include high-resolution imaging for alpha particles of in vitro sliced tissue and pre-clinical biologic assessments for targeted alpha therapy.

• ETRI Journal
• /
• 제27권3호
• /
• pp.289-293
• /
• 2005

We propose an asymmetric integral imaging method to adjust the resolution and depth of a three-dimensional image. Our method is obtained by use of two lenticular sheets with different pitches fabricated under the same F/#. The asymmetric integral imaging is the generalized version of integral imaging, including both conventional integral imaging and one-dimensional integral imaging. We present experimental results to test and verify the performance of our method computationally.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권3호
• /
• pp.1043-1064
• /
• 2020

A kind of Subjective Imaging Effect Assessment (SIEA) method and its applications on intelligent imaging terminal design in engineering site are presented. First, some visual assessment indices are used to characterize the imaging effect: the image brightness, the image brightness uniformity, the color image contrast, the image edge blur, the image color difference, the image saturation, the image noise, and the integrated imaging effect index. A linear weighted function is employed to carry out the SIEA computation and the Analytic Hierarchy Process (AHP) technique is used to estimate its weights. Second, a SIEA software is developed. It can play images after the settings of assessment index or assessment reaction time, etc. Third, two cases are used to illustrate the application effects of proposed method: the image enhancement system design for surveillance camera and the imaging environment perception system design for intelligent lighting terminal. A Prior Sequential Stimulus (PSS) experiment is proposed to improve the evaluation stability of SIEA method. Many experiment results have shown the proposed method can realize a stable system design or parameters setting for the intelligent imaging terminal in engineering site.

• Nuclear Engineering and Technology
• /
• 제56권10호
• /
• pp.3993-4006
• /
• 2024

Compton imaging excels at visualizing gamma rays in the range of several hundred kiloelectronvolts to several megaelectronvolts. However, this technique has limitations in the imaging of low-energy gamma rays. In contrast, collimatorless imaging technique determines the location of a source by analyzing the distribution of interactions. Because the collimatorless imaging technique excels at imaging low-energy gamma rays that are easily shielded by detector components, it can compensate for the shortcomings of the Compton imaging technique. In this study, we propose a dual-mode imaging technique that selects the imaging method depending on the target gamma-ray energy and fuses them during reconstruction. The collimatorless imaging method demonstrated high angular resolution at low energy levels, whereas the Compton image surpasses it starting from 200 keV within its reconstructible range. The angular resolution of the dual-mode image was between those of the two methods. The trend of the positional error of gamma ray energy was similar to that of the angular resolution, and the dual-mode method exhibited the lowest average error of 0.7°. The dual imaging method exhibited higher efficiency, figure of merit, and signal-to-noise ratio by utilizing events from both imaging modalities. In addition, we investigated the geometrical effects of various structures.

• 대한의용생체공학회:의공학회지
• /
• 제17권1호
• /
• pp.93-98
• /
• 1996

The purpose of this paper is to propose a new localized imaging method of reduced imaging time luting a locally-linear gradient. Since most fast MR(Magnetic Resonance) imaging methods need the whole $\kappa$-space(Spatial frequency space) data corresponding to the whole imaging area, there are limitstions in reducing the minimum imaging time. The imaging method proposed in this paper uses a specially-made gradient coil generating a local ramp-shape field and uniform field outside of the imaging areal Conventional imaging sequences can be used without any RF/gradient pulse sequence modifiestions except the change in the number of encoding steps and the field of view.

• Current Optics and Photonics
• /
• 제3권3호
• /
• pp.220-226
• /
• 2019

A novel speckle-shifting ghost imaging (SSGI) technique is proposed in this paper. This method can effectively extract the edge of an unknown object without achieving its clear ghost image beforehand. However, owing to the imaging mechanism of SSGI, the imaging result generally contains serious noise. To solve the problem, we further propose a simple and effective method to remove noise from the speckle-shifting ghost image with a connected-region labeling (CRL) algorithm. In this method, two ghost images of an object are first generated according to SSGI. A threshold and the CRL are then used to remove noise from the imaging results in turn. This method can retrieve a high-quality image of an object with fewer measurements. Numerical simulations are carried out to verify the feasibility and effectiveness.

• Journal of Mechanical Science and Technology
• /
• 제18권7호
• /
• pp.1236-1245
• /
• 2004

In this study, an optical imaging method was developed for the measurements of the sizes and velocities of droplets in sprays. Double-exposure single-frame spray images were captured by the imaging system. An image processing program was developed for the measurements of the sizes and positions of individual particles including separation of the overlapped particles and particle tracking and pairing at two time instants. To recognize and separate overlapping particles, the morphological method based on watershed segmentation as well as separation using the perimeter and convex hull of image was used consecutively. Better results in separation were obtained by utilization of both methods especially for the multiple or heavily-overlapped particles. The match probability method was adopted for particle tracking and pairing after identifying the positions of individual particles and it produced good matching results even for large particles like droplets in sprays. Therefore, the developed optical imaging method could provide a reliable way of analyzing the motion and size distribution of droplets produced by various sprays and atomization devices.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권6호
• /
• pp.383-389
• /
• 2016

This paper presents a novel automatic white balance (AWB) algorithm for consumer imaging devices. While existing AWB methods require reference white patches to correct color, the proposed method performs the AWB function using only an input image in two steps: i) white point detection, and ii) color constancy gain computation. Based on the dark channel prior assumption, a white point or region can be accurately extracted, because the intensity of a sufficiently bright achromatic region is higher than that of other regions in all color channels. In order to finally correct the color, the proposed method computes color constancy gain values based on the Y component in the XYZ color space. Experimental results show that the proposed method gives better color-corrected images than recent existing methods. Moreover, the proposed method is suitable for real-time implementation, since it does not need a frame memory for iterative optimization. As a result, it can be applied to various consumer imaging devices, including mobile phone cameras, compact digital cameras, and computational cameras with coded color.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.290-293
• /
• 2009

In this paper, we propose a method to estimate pointing region in real-world from images of cameras. In general, arm-pointing gesture encodes a direction which extends from user's fingertip to target point. In the proposed work, we assume that the pointing ray can be approximated to a straight line which passes through user's face and fingertip. Therefore, the proposed method extracts two end points for the estimation of pointing direction; one from the user's face and another from the user's fingertip region. Then, the pointing direction and its target region are estimated based on the 2D-3D projective mapping between camera images and real-world scene. In order to demonstrate an application of the proposed method, we constructed an ICGS (interactive cinema guiding system) which employs two CCD cameras and a monitor. The accuracy and robustness of the proposed method are also verified on the experimental results of several real video sequences.