• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.5
• /
• pp.666-672
• /
• 2011

In this paper, we describes the development of automatic inspection system for detecting the defects on photovoltaic wafer by using machine vision. Until now, The defect inspection process was manually performed by operators. So these processes caused the produce of poorly-made articles and inaccuracy results. To improve the inspection accuracy, the inspection system is not only configured, but the image processing algorithm is also developed. The inspection system includes dimensional verification and pattern matching which compares a 2-D image of an object to a pattern image the method proves to be computationally efficient and accurate for real time application and we confirmed the applicability of the proposed method though the experience in a complex environment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.245-252
• /
• 1997

The development of digital camera and advancement of computer processor could simplify the acquisition and the analysis of digial image, and be the real-time processing by the digital photogrammetry. This study is about to enhancement of the image measuring accuracy by the centroid methods. We were able to determine more effective centroid measuring methods and suitable target shape as the development of analysis system and actualize semi-automatic measuring of digital image. And we can supply the weakness of non-metric camera for the geometric internal accuracy of digital image as the correct of Kodak DCS200 camera 8008s lens distortion.

• 한국항공운항학회:학술대회논문집
• /
• 2004.11a
• /
• pp.275-278
• /
• 2004

In this paper, development of the Image Transmission and Receiving System(ITRS) for UAV is being introduced. ITRS can tranfer the imagery informations from UAV to the multiple sites at the same time. Analog video signal is encoded by using MPEG4 protocol at the Image Transmission System, and the encoded digital video data can be transmitted to the various locations where the Image Receiving System decodes and displays the received video data. The ITRS might be a very efficient method of sharing UAV's information at a low cost.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.6
• /
• pp.988-994
• /
• 2017

The risk of facilities in catenary is increasing because the railway section extension and high-speed train service. And visual check of workforce is not enough time to maintain the extensive railway facilities. Accordingly, The technical development trend of maintenance of railway facilities can be seen by automation and application of IT technology, especially the mechanization work and the information technology are spreading in the maintenance work of the train line solved by manpower. In this paper, we describe the method by obtaining the cantilever image using acquisition device and pole inspection system in high speed vehicle, to check the variation of the cantilever component using image processing.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.4
• /
• pp.484-491
• /
• 2019

General Hyperspectral Image Sensor acquires an image of line form such as a thin rectangle shape because of using 1D array Push Broom or Whisk Broom scanning method. A special mechanism is required for a Hyperspectral Image Sensor to operate for nadir and slant range. To design the mechanism, the characteristics of the flight motion and the overlap rate between consecutive frames were analyzed. Also, system requirements were proposed through modeling and simulation.

• Progress in Medical Physics
• /
• v.32 no.1
• /
• pp.1-17
• /
• 2021

The evolution of X-ray computed tomography (CT) has been based on the discovery of X-rays, the inception of the Radon transform, and the development of X-ray digital data acquisition systems and computer technology. Unlike conventional X-ray imaging (general radiography), CT reconstructs cross-sectional anatomical images of the internal structures according to X-ray attenuation coefficients (approximate tissue density) for almost every region in the body. This article reviews the essential physical principles and technical aspects of the CT scanner, including several notable evolutions in CT technology that resulted in the emergence of helical, multidetector, cone beam, portable, dual-energy, and phase-contrast CT, in integrated imaging modalities, such as positron-emission-tomography-CT and single-photon-emission-computed-tomography-CT, and in clinical applications, including image acquisition parameters, CT angiography, image adjustment, versatile image visualizations, volumetric/surface rendering on a computer workstation, radiation treatment planning, and target localization in radiotherapy. The understanding of CT characteristics will provide more effective and accurate patient care in the fields of diagnostics and radiotherapy, and can lead to the improvement of image quality and the optimization of exposure doses.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.6
• /
• pp.15-21
• /
• 2003

Image processing technique was adapted for exploring the more convenient ways to investigate the drying characteristics of wood. The acquisition of information about drying characteristics is indispensable for the development or improvement of dry-kiln schedules. A small internal fan type wood dry kiln was combined with image-processing and data-acquisition systems to monitor continuously the formation of checks and moisture reduction during drying. All the images and data were analyzed to improve or estimate the dry-kiln schedules and predict the drying time which would be required to dry green wood to 10% moisture content in internal fan type kiln. Samples of 20 mm- and 50 mm-thick Metasequoia glyptostrobodies, Paulownia coreana Uyeki, Pinus densiflora Sieb. Et Zucc., Platanus occidentalis L., Quercus acutissima and Robinia pseudo-acacia were used to verify the potentiality of this technique.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1069-1073
• /
• 2023

A research project titled as Development of Comprehensive Land Management Technology using Satellite Image Information, funded by the Ministry of Land and Transportation, is being conducted to improve the efficiency of land management and to boost satellite image utilization in the private sector. This editorial describes the introduction of the project and papers presented in this special edition.

• Archives of design research
• /
• v.3 no.1
• /
• pp.34-70
• /
• 1990

Recently the tourism industry has achieved rapid growth and thus stands out as a means for the improvement of international payments and the acquirement of foreign currency. In particular, the hotel and major tourist travel industries have been developed for the inducement of foreign tourists. However, the manu-facturing and sales indust\ulcornerries of tourism folklore haven't developed. The reason is that the endeavor to attract tourists has been more emphasized than the development of tourism folklore which includes chief shopping items and indust-rialization. Tourism folklore plays a great role not only as material evidence of a tourist's visit to a country or region but also as a gift and a souvenir. Also it represents the image and the degree of the industrial development of the nation, so it should be congruent with the nature and the images of the region. Nevertheless, our tourism folklore has been merely mass produced by specific companies that do not represent the region's image and nature in their products. Tourism folklore development can raise the image of Choongnam and serve as a catalyst to induce tourists. Also, it can be an avenue for com$$\mu$ity publicity and industrialization. Thus, this study has examined and analyzed original products made with textiles and metal materials whether can be developed into tourism folklore. Also this study presents the example of developed tourism folklore works in a foreign country. It tries to give the unique symbolic image of Choongnam by developing the original products with Choongnam' s own materials. However, this study has shown that the actual conditions of tourism folklore development in Choongnam are seriously inferior to other industries. The producers are limited. Moreover, the product items are coarse. Many problems are being brought up which should be improved. Hereafter, to develop Choongnam's own tourism folklore, it should be carried out with financial and political support from the government, design development by industrial circles, professional design training and marketing research by the sellers.

• Korean Journal of Remote Sensing
• /
• v.28 no.3
• /
• pp.319-327
• /
• 2012

In this paper, we introduce a newly developed photogrammetric software for automatic generation of high quality geo-products and its performance assessment carried out using various satellite images. Our newly developed software provides the latest techniques of an optimized sensor modelling, ortho-image generation and automated Digital Elevation Model (DEM) generation for diverse remote sensing images. In particular, images from dual- and multi-sensor images can be integrated for 3D mapping. This can be a novel innovation toward a wider applicability of remote sensing data, since 3D mapping has been limited within only single-sensor so far. We used Kompsat-2, Ikonos, QuickBird, Spot-5 high resolution satellite images to test an accuracy of 3D points and ortho-image generated by the software. Outputs were assessed by comparing reliable reference data. From various sensor combinations 3D mapping were implemented and their accuracy was evaluated using independent check points. Model accuracy of 1~2 pixels or better was achieved regardless of sensor combination type. The high resolution ortho-image results are consistent with the reference map on a scale of 1:5,000 after being rectified by the software and an accuracy of 1~2 pixels could be achieved through quantitative assessment. The developed software offers efficient critical geo-processing modules of various remote sensing images and it is expected that the software can be widely used to meet the demand on the high-quality geo products.