• Journal of the Korean GEO-environmental Society
• /
• v.18 no.1
• /
• pp.31-35
• /
• 2017

The mechanical characteristics of frozen sand greatly depend on the frozen temperature and the fine contents according to the previous study by Chae et al. (2015). There are two hypotheses to explain this experimental results; one is the unfrozen water contents greatly affected by the fine contents and frozen temperature and the other is the sand particle spacing greatly affected by the pore-ice. To evaluate the latter hypothesis, the micro X-ray CT scan was performed. The micro X-ray CT scanning, one of the actively performed interdisciplinary research area, has a high resolution with micrometer unit allows to investigate internal structure of soils. In this study, X-ray CT technique was applied to investigate the effect of the frozen temperature and fine contents on the sand particle minimum and average spacing with the developed image processing techniques. Based on the spacing analysis, the frozen temperature and fine contents have little influence on the sand particle spacing in the frozen sand specimens.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.3
• /
• pp.277-284
• /
• 2015

Purpose: The study aimed to evaluate the effect of circle contact lens wearing on visual quality of the eyes after a refractive surgery. Methods: The objective visual quality was evaluated for 40 eyes who did not get refractive surgery and 30 eyes who got a refractive surgery after applying plano circle contact lenses on their eyes, respectively. Modulation transfer function (MTF), objective scatter index (OSI) and the focusing ratio on retina (Strehl ratio) were measured by using optical quality analysis system (OQAS) and the correlation between pupil size and objective visual quality was analyzed by measuring the pupil size. Results: When wearing circle contact lens on the eyes after refractive surgery, MTF and Strehl ratio were reduced and OSI was increased compared with the eyes without refractive surgery. The eyes after a refractive surgery showed more significant difference changes in MTF, OSI and Strehl ratio according to the pupil size compared with those without refractive surgery. Conclusions: The results showed that wearing of circle contact lens after the refractive surgery has deteriorated the objective visual quality based on the quality of focused image on the retina. Therefore, we suggest that sufficient understanding and consideration about the deterioration of visual quality is necessary in the case of circle contact lens wearing after refractive surgery.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.4
• /
• pp.77-84
• /
• 2012

Face classification has wide applications in intelligent video surveillance, content retrieval, robot vision, and human-machine interface. Pose and expression changes, and arbitrary illumination are typical problems for face recognition. When the face is captured at a distance, the image quality is often degraded by blurring and noise corruption. This paper investigates the efficacy of multi-classifier decision level fusion for face classification based on the photon-counting linear discriminant analysis with two different cost functions: Euclidean distance and negative normalized correlation. Decision level fusion comprises three stages: cost normalization, cost validation, and fusion rules. First, the costs are normalized into the uniform range and then, candidate costs are selected during validation. Three fusion rules are employed: minimum, average, and majority-voting rules. In the experiments, unfocusing and motion blurs are rendered to simulate the effects of the long distance environments. It will be shown that the decision-level fusion scheme provides better results than the single classifier.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.2
• /
• pp.79-94
• /
• 2019

The purpose of this research study was to examine how multi-cultural education contents are reflected in the contents related to the 'Human Development and Family' area of middle school Technology-Home Economics textbooks, based on the multi-cultural education criteria developed by Paek(2014). The sample of the study consisted of the 'Human Development and Family' contents in 'Technology-Home Economics 1·2' textbooks from five publishers (10 volumes) written in accordance with the 2015 revised curriculum. The research results of the study can be summarized as follows: First, all the four multi-cultural education criterion components were shown in the textbooks from five publishers. Cooperation was shown in the highest frequency, followed by Identity, Diversity, and Equality. Second, the analyses of text, image, and learning activities in the textbooks confirmed that Home Economics as a subject contains multi-cultural education contents that allow students to establish self and identity, respect others, accept diverse family patterns, understand family changes from multiple viewpoints, and form family community culture from gender equality perspective without prejudice. Ultimately, it can be concluded that Home Economics is a subject that enables learners to learn how individuals and families can cooperate and care for each other in order to harmoniously coexist.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.3-9
• /
• 2013

Various data like digital maps(1/1,000 or 1/5,000), field surveying, online materials and literatures are used for the preliminary investigation for urban development such as the feasibility evaluation, the profitability analysis, the zoning proposal, the zoning designation, and the land replotting planning. There are a couple of urban development methods like an expropriation, a replotting, a mixed-used method. The replotting method requires the consideration of land replotting types based on topography and building condition, which is not easy to gather data for the preliminary investigation maintaining the security of development planning. There are limitations of a preliminary investigation using aerial photos to detect topographic and building changes at specific period. GIS data combined with high-resolution imagery has advantages over the current dataset, which come from easy acquisition of various spatial resolution satellite images, wide swath coverage, the choice of imagery resolution satisfying a usage purpose, economic benefit comparing to aerial photos, and the calculation of distance and area on imagery from image modeling. For these reasons, the proposed method in this study enables to perform the more appropriate preliminary investigation using more accurate information.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.197-205
• /
• 2020

Compared to aerial photogrammetry, UAV photogrammetry has advantages in acquiring and utilizing high-resolution images more quickly. The production of 3D models using UAV photogrammetry has become an important issue at a time when the applications of 3D spatial information are proliferating. Therefore, this study assessed the feasibility of utilizing 3D models produced by UAV photogrammetry through quantitative and qualitative analyses. The qualitative analysis was performed in accordance with the LODs (Level of Details) specified in the 3D Land Spatial Information Construction Regulation. The results showed that the features on planes have a high LoD while features with elevation differences have a low LoD due to the occlusion area and parallax. Quantitative analysis was performed using the 3D coordinates obtained from the CPs (Checkpoints) and edges of nearby structures. The mean errors for residuals at CPs were 0.042 m to 0.059 m in the horizontal and 0.050 m to 0.161 m in the vertical coordinates while the mean errors in the structure's edges were 0.068 m and 0.071 m in horizontal and vertical coordinates, respectively. Therefore, this study confirmed the potential of 3D models from UAV photogrammetry for analyzing the digital twin and slope as well as BIM (Building Information Modeling).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.1033-1041
• /
• 2014

Rapid urbanization of Korea was an unprecedented example in the world and urban population increased significantly. As a result, unbalanced distribution of population is serious problem in Korea because approximately 50% of the population is concentrated in the capital area that is 10% of nation's territory, thereby occurring various urban problems including UHI. Hence, Sejong Special Autonomous City was inaugurated officially on 2 July 2012 in order to decentralize population of capital area and induce more balanced regional development. The Sejong City has been changed drastically over a period of years as developed practically since the late 2000's and is expected to have new problems of urbanization. The land cover change due to urbanization is the main cause of UHI that urban area is significantly warmer than its surrounding areas and UHI is not only affecting urban climate change but also natural environment. So the purpose of this research is to analyze level of urbanization and UHI effect and to provide the correlation analysis between Land Surface Temperature and spectral indices. To achieve this, satellite imagery from LANDSAT were used. NDVI, NDBI, and UI were calculated using red, near-infrared, mid-infrared ($0.63{\mu}m-1.75{\mu}m$) images and LST was retrieved utilizing thermal infrared ($10.4{\mu}m-12.5{\mu}m$) image. Based on each index and LST, Changes of NDVI, UI and UHI through TVI were analyzed in Sejong City. UHI effect increased around newly constructed multi-functional administrative city, the correlation between LST and NDVI was negative and UI was strong positive.

• Journal of Distribution Science
• /
• v.11 no.10
• /
• pp.27-36
• /
• 2013

Purpose - This paper empirically studies the effects of advanced design innovation strategy on business performance, to investigate manufacturing industries that can develop design-driven-innovation strategies. Many researchers now recognize the importance of design in a CEO's decision-making process. To analyze these effects, this study deduces the definition of advanced design strategy by reviewing existing studies. The advanced design is a strategy that is applied to improve business performance instead of the appearance of a product for increasing its sales. In terms of business processes, the advanced design strategy is defined as the incorporation of business activities prior to the development of the product, to offer new experiences and values to users, from those designs. Research design/data/methodology - This paper establishes a model for empirical analysis. In this study, we derived factors of the characteristics of advanced design based on previous studies. We tried to investigate whether advanced design innovation strategy and entrepreneur's characteristics could have any impact on business performance. At the same time, we tried to find out the moderating effect of entrepreneurs' characteristics. The advanced design is made up of three elements: precedence, integration, and immersion of design activities. These three elements are independent variables for the model. The dependent variables are: increased rate of sales, R & D performance, and public image of the company. Specifically, this study establishes a CEO's characteristics as a moderating variable between the independent and dependent variables. Results - We proved that the level of entrepreneurs' characteristics has a moderating effect on the business performance. The findings of this study offer the following theoretical implications. The precedence of design activities positively affects the increased rate of sales by offering new experiences to users and creating new values. The integration of design activities also has a positive effect on the R&D performance. In addition, the immersion of design activities positively influences all the elements comprising business performance. The analysis of moderating variables elucidates that CEO's characteristics have a moderating role between precedence, integration, and immersion of design activities, and business performance. Conclusions - The practical implications of the study are as follows. This study contributes to the progression of advance design theories by conducting an empirical study on the advanced design concept. More importantly, the empirical study on the CEO group seeking exploratory innovation supports Verganti's "design-driven innovation" concept, according to which design can make innovation successful by offering useful values to users, as evident in the case of many innovative companies, such as Nintendo and Apple. Future studies need to investigate the reliability of practical examples, including the various activities of business. We suppose that there may be real differences between the results of this study and the applicative situation in the presence of a CEO group.

• Economic and Environmental Geology
• /
• v.46 no.2
• /
• pp.105-121
• /
• 2013

This study introduces integrated approach on detection of a leakage in a sea wall based on remote sensing, electric resistivity survey, electromagnetic survey, and borehole survey for the Seosan A-Region sea wall. The satellite temperature distribution from Landsat ETM+ data identifies water leakage distribution and period by analyzing temperature mixing patterns between sea water and fresh water. Electric resistivity survey provides both horizontal and vertical anomaly distributions over the sea wall showing below average electric resistivity. Electromagnetic survey(electrical conductivity survey) reveals the potential possible leakage areas with minimal background impact by comparing electrical conductivity values between high and low tides. Borehole image processing system confirmed the locations of anomalies identified from the other survey methods and distributions of vertical fracture zones. The integrated approach identified 41.7% of the sea wall being the most probable area vulnerable to water leakage and effectively approximated both horizontal and vertical distribution of water leakage. The integrated analysis of remote sensing, electric resistivity survey, electromagnetic survey and borehole survey is considered to be an optimal method in identifying water leakage distribution, period, and extent of fractures knowledged from the boreholes.

• The Journal of the Korea Contents Association
• /
• v.15 no.3
• /
• pp.488-498
• /
• 2015

Form the observation that the successful management and operation of university websites brings about university branding effects, this paper attempts to identify the problems in relation to evaluation elements of university homepages and establish a new evaluation model that allows us to grasp the importance and priority of phased evaluation elements. In particular, we tried to secure the objectivity of the importance of department homepage evaluation elements by using AHP(Analytic Hierarchy Process). Our analysis shows that among 29 evaluation elements of department homepage, mobile service, curriculum, description of department's characteristics, guide to homepage usage/accessibility to site map and differentiated educational method were considered to be relatively important whereas the relative importance of department's slogan, differentiated image and identity, linkage to SNS, Q&A bulletin board, operation of department community, and FAQ was low. Based on the findings from our analysis, we present the basic foundation for successful management and operation of university department homepages along with a few suggestions for vitalizing those hompages.