• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1559-1564
• /
• 2011

This study presents the development of a machine vision inspection system(MVIS) purposely for car seat frames as an alternative for human inspection. The proposed MVIS is designed to meet the demands, features and specifications of car seat frame manufacturing companies in striving for increased throughput of better quality. This computer-based MVIS is designed to perform quality measures by detecting holes, nuts and welding spots on every car seat frame in real time. In this study, the NI Vision Builder software for Automatic Inspection was used as a solution in configuring the aimed quality measurements. The techniques for visual inspection are optimized through qualitative analysis and simulation of human tolerance on inspecting car seat frames. Furthermore, this study exemplifies the incorporation of the optimized vision inspection environment to the pre-inspection and post-inspection subsystems. The system built on this proposed MVIS for car seat frames has successfully found the possible detections.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4472-4477
• /
• 2013

This paper describes the color features of smoke in each standard color model in order to present the most suitable color model for somke detection in video surveillance system. Histogram intersection technique is used to analyze the difference characteristics between color of smoke and color of non smoke. The considered standard color models are RGB, YCbCr, CIE-Lab, HSV, and if the calculated histogram intersection value is large for the considered color model, then the smoke spilt characteristics are not good in that color model. If the calculated histogram intersection value is small, then the smoke spilt characteristics are good in that color model. The analyzed result shows that the RGB and HSV color models are the most suitable for color model based smoke detection by performing respectively 0.14 and 0.156 for histogram intersection value.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.8
• /
• pp.2061-2074
• /
• 1998

In pattern recognition and image analysis upplications, a graph is a useful tool for complex obect representation and recognition. However it takes much time to pair proper nodes between the prototype graph and an input data graph. Futhermore it is difficult to decide whether the two graphs in a class are the same hecause real images are degradd in general by noise and other distortions. In this paper we propose a matching algorithm using a matrix. The matrix is suiable for simple and easily understood representation and enables the ordering and matching process to be convenient due to its predefined matrix manipulation. The nodes which constitute a gaph are ordered in the matrix by their geometrical positions and this makes it possible to save much comparison time for finding proper node pairs. for the classification, we defined a distance measure thatreflects the symbo's structural aspect that is the sum of the mode distance and the relation distance; the fornet is from the parameters describing the node shapes, the latter from the relations with othes node in the matrix. We also introduced a subdivision operation to compensate node merging which is mainly due t the prepreocessing error. The proposed method is applied to the recognition of musteal symbols and the result is given. The result shows that almost all, except heavily degraded symbols are recognized, and the recognition rate is approximately 95 percent.

• Radiation Oncology Journal
• /
• v.34 no.1
• /
• pp.64-75
• /
• 2016

Purpose: In order to evaluate the relationship between the dose to the liver parenchyma and focal liver reaction (FLR) after stereotactic ablative body radiotherapy (SABR), we suggest a novel method using a three-dimensional dose distribution and change in signal intensity of gadoxetate disodium-gadolinium ethoxybenzyl diethylenetriamine pentaacetic acid (Gd-EOB-DTPA)-enhanced magnetic resonance imaging (MRI) hepatobiliary phase images. Materials and Methods: In our method, change of the signal intensity between the pretreatment and follow-up hepatobiliary phase images of Gd-EOB-DTPA-enhanced MRI was calculated and then threshold dose (TD) for developing FLR was obtained from correlation of dose with the change of the signal intensity. For validation of the method, TDs for six patients, who had been treated for liver cancer with SABR with 45-60 Gy in 3 fractions, were calculated using the method, and we evaluated concordance between volume enclosed by isodose of TD by the method and volume identified as FLR by a physician. Results: The dose to normal liver was correlated with change in signal intensity between pretreatment and follow-up MRI with a median $R^2$ of 0.935 (range, 0.748 to 0.985). The median TD by the method was 23.5 Gy (range, 18.3 to 39.4 Gy). The median value of concordance was 84.5% (range, 44.7% to 95.9%). Conclusion: Our method is capable of providing a quantitative evaluation of the relationship between dose and intensity changes on follow-up MRI, as well as determining individual TD for developing FLR. We expect our method to provide better information about the individual relationship between dose and FLR in radiotherapy for liver cancer.

• Korean Journal of Materials Research
• /
• v.10 no.10
• /
• pp.715-720
• /
• 2000

By the mechanical alloying method. Ni-WC composite materials were prepared to improve the deformation-resistance for creep and sintering of Ni-anode at the operating temperature of $650^{\circ}C$. Mechanically alloyed powder w was initially fabricated by ball milling for 80hr, and then amorphization was occurred by the destruction of ordered crystals based on XRD analysis. In order to investigate the electrochemical performance and sheet characteristics of Ni-WC anode, tape casting process was adopted. Finally, the obtained sheet thickness of Ni- we after sintering at $1180^{\circ}C$ for 60 minutes in $H_2$ atmosphere was O.9mm and the average pore size was $3~5{\mu\textrm{m}}$ with porosities of 55%. The second phase was not observed in Ni- W matrix while W particles were finely and uniformly distributed in Ni matrix. This fine and uniform distributed W particles in Ni matrix are expected to enhance the mechanical properties of Ni anode through the dispersion and solid solution hardening mechanisms.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.3
• /
• pp.325-333
• /
• 2007

This study was conducted to investigate the weight concerns of female university students living in Jeonju, as well as their control on behavior. Self-administered questionnaires were collected from 285 students. Statistical data analysis was completed using the SPSS v. 11.0 program. The results are summarized as follows: The average weight, height, and BMI of the subjects were 21.43 kg, 161.93 cm, and 19.8, respectively. With regard to body image, most were dissatisfied with their figures, especially the hips and thighs. About 42% of the students estimated their figures as 'slightly fat', while 5.4% stated 'very fat', even though their BMI classified as 'normal'. Four percent of the underweight students described themselves as being 'fatty'. Approximately 93% of the students had strongly pursued weight control, and 45.3% reported wanting to lose about $2{\sim}5$ kg. Almost 73% of the respondents had weight loss experience. The primary reason for weight control was to improve self-confidence. Only 19.6% had succeeded in losing weight, while nearly 48% had stopped dieting. To reduce weight, about two thirds of the students ate less(e.g. no snacks, no sweets). Fifty percent tried to reduce weight by more physical activity(e.g. sports). Television(50.9%), friends(48.4%), and newspapers/magazines(40.4%) were essential sources of pertinent information. In conclusion, the results show that female students in Jeonju have a great interest in weight reduction. Thus, the majority are willing to try several methods for weight reduction, which however, are not promising and not based on a lasting nutritional change. Therefore, it's necessary to increase cooperation among those concerned(e.g. dietitians, teachers, parents, media) and to develop weight-control programs that take into consideration lifestyle and daily habits, as well as combine physical activity, nutrition, and behavioral and personality training.

• Journal of Korea Multimedia Society
• /
• v.9 no.5
• /
• pp.576-584
• /
• 2006

Content-based video matching is measuring a similarity of video signature compared to the original clip and copies of media. Specially, it is very important to match the exact frame position, but it depends on frame rate, noise condition and compression format of video. Ordinal signature shows good performance than other video signatures under normal condition but the previous didn't try to find the uniqueness and robustness. Hua et al. performed a uniqueness test under compressed in different formats or frame size. However, they used other compression format image instead of noise in robustness test. This paper proposes robustness test method using several noise models and analyzes the performance of robustness and uniqueness.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.6
• /
• pp.371-376
• /
• 2007

Objective : The aim of this study was to investigate the usefulness of diffusion-weighted imaging [DWI] and apparent diffusion coefficiency [ADC] in distinguishing brain abscesses from cystic or necrotic brain tumors, which are difficult to be differentiated by conventional magnetic resonance imaging techniques. Methods : Seven patients with brain abscesses and ten patients with cystic brain tumors were studied from September 2003 to October 2005. Abscess, subdural empyema and ventriculitis were categorized to the abscess group and cystic or necrotic brain gliomas or metastatic brain tumors into the tumor group. Preoperative magnetic resonance images were performed in all patients and diffusion-weighted images and apparent diffusion coefficiency values of lesions were calculated directly from software of 1.5 tesla MRI [General Electrics, USA]. The ratio of the ADC of the lesion to contralateral regional ADC was also measured [relative ADC, rADC]. Results : The average ADC value of pyogenic abscesses group was $0.82+/-0.14{\times}10^{-3}\;[mean+/-S.D.]\;mm^2/s$ and mean rADC was 0.75. Cystic or necrotic areas had high ADC values [$2.49+/-0.79{\times}10^{-3}\;mm^2/s$, mean rADC=2.14]. ADC and rADC values of abscesses group showed about three times lower values than those of cystic or necrotic tumor group. Conclusion : This study results based on numerical comparison of signal intensities and quantitative analysis to distinguish between brain abscess and cystic or necrotic tumor, DWI and ADC mapping are thought to be very useful diagnostic tools.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.5
• /
• pp.573-580
• /
• 2005

In this paper, we propose an emotion recognition using static and dynamic facial images to effectively design human interface. The proposed method is constructed by HMM(Hidden Markov Model), PCA(Principal Component) and wavelet transform. Facial database consists of six basic human emotions including happiness, sadness, anger, surprise, fear and dislike which have been known as common emotions regardless of nation and culture. Emotion recognition in the static images is performed by using the discrete wavelet. Here, the feature vectors are extracted by using PCA. Emotion recognition in the dynamic images is performed by using the wavelet transform and PCA. And then, those are modeled by the HMM. Finally, we obtained better performance result from merging the recognition results for the static images and dynamic images.

• Journal of Radiation Industry
• /
• v.9 no.3
• /
• pp.143-151
• /
• 2015

A PET-MR system is particularly useful in diagnosing brain diseases. We have developed a prototype positron emission tomography (PET) system which can be inserted into the bore of a whole-body magnetic resonance imaging (MRI) system that enables us to obtain PET and MRI images simultaneously with a reduced cost. Silicon photomultipliers (SiPM) are appropriated as a PET detector at PET/MR system because detectors have a high gain and are insensitive to magnetic fields. Despite of its improved performance compared to that of PMT-based detectors, there is a problem of the photo-peak channel shift which is due to the increase of the temperature inside the ring detector. This problem will occur decreasing sensitivity of the PET and image distortion. In this paper, I quantitative analyze parameters of the KAIST SiPM depending on temperature by experiments. And I designed cooling methods in consideration of the degradation of sensors for correction of the temperature in the PET gantry. According to this research, we expect that distortive images and degradation of the sensitivity will not be occurred with using the above idea to reduce heat even if the PET system operates for a long time.