• Journal of the Korea Society of Computer and Information
• /
• v.28 no.2
• /
• pp.19-25
• /
• 2023

In this paper, we propose a method for improving raw images captured in a low light condition based on deep learning considering the image signal processing. In the case of a smart phone camera, compared to a DSLR camera, the size of a lens or sensor is limited, so the noise increases and the reduces the quality of images in low light conditions. Existing deep learning-based low-light image processing methods create unnatural images in some cases since they do not consider the lens shading effect and white balance, which are major factors in the image signal processing. In this paper, pixel distances from the image center and channel average values are used to consider the lens shading effect and white balance with a deep learning model. Experiments with low-light images taken with a smart phone demonstrate that the proposed method achieves a higher peak signal to noise ratio and structural similarity index measure than the existing method by creating high-quality low-light images.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.555-562
• /
• 2007

In order to display Bayer input stream received from CMOS image sensor to the display device, image signal processing must be performed. That is, the hardware performing the image signal processing for Bayer data is called ISP(Image Signal Processor). We can see real image through ISP processing. ISP executes functionalities for gamma correction, interpolation, color space conversion, image effect, image scale, AWB, AE and AF. In this paper, we obtained the optimum algorithm through software verification of ISP module for CMOS camera image sensor and described using VHDL and verified in ModelSim6.0a simulator. Also we downloaded into Xilinx XCV-1000e for the designed ISP module and completed the board level verification using PCI interface.

• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.551-555
• /
• 2009

This paper proposes a signal generation method for automatic control of a monitoring camera. Using the control signal, the monitoring camera can track a moving object and keep it near the image center for a longer time. The proposed method is estimated in the experiments that automatically move a maker located at the specified position to the image center.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.4
• /
• pp.23-30
• /
• 2001

In this paper, the discharge image of NO particles wire-cylinder type electrode in the discharge reactor where AC dielectric barrier type corona discharge occurred and horizontal and vertical signal intensity at each flourescence emission during discharge and the horizontal and vertical signal strength of NO particles at flourescence emission wavelength band[236[nm], 247[nm]], were measured were measured by ICCD Camera. In addition discharge images and signal intensities in accordance with discharge time were measured to figure out the discharge mechanism. It was found that the strongest horizontal and vertical signal intensity of NO particles were observed at 247[nm] band, but no big difference in the horizontal and vertical signal intensity in accordance with discharge time was seen. In particular, the phenomenon image occuring inside the discharge reactor and wavelength ware able to be carried based on the measured data.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.202-207
• /
• 2002

EOC (Electro-Optical Camera) of KOMPSAT-1 (Korea Multi-Purpose SATellite) has been producing land imageries of the world since January 2000. After image data are acquired by EOC, they are transmitted from satellite to ground via X-band RF signal. Then, EOC image data are generated and pass through radiometric and geometric corrections to generate standard products of EOC images. After radiometric correction on EOC image data, Modulation Transfer Function (MTF) compensation is applicable on EOC images with user's request for better image quality. MTF compensation is concerned with filtering EOC images to minimize the effect of degradations. For Image Receiving and Processing System (IRPE) at KOMPSAT Ground Station (KGS), Wiener filter is used in MTF compensation for EOC images. If the Pointing Spread Function (PSF) of EOC system is known, signal-to-noise power spectra ratio is the only factor in the determination of Wiener filter. In this paper, MTF compensation in IRPE at KGS is introduced and MTF compensated EOC 1R images are generated using Wiener filters with various signal-to-noise power spectra ratios. MTF compensated EOC 1R images are correlated with EOC 1R images for observing linearities between them. As a result, the effect of signal-to-noise power spectra ratio is shown on MTF compensated EOC 1R images.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1737-1744
• /
• 2010

The Image sensor needs various image processing to improve image quality. ISP(Image Signal Processor) performs various image processing. Conventional vision cameras have own software ISP functions and perform in PC instead of using commercial ISP chips. However these methods have problems such as large computation for image processing. In this paper, we proposed ISP that significantly reduced chip area by efficient sharing of hardware and software. Large operation blocks are designed to hardware for high performances, and we used hardware simultaneously with software considering the size of the hardware. The implemented ISP can process VGA(640*4800) images and has 91450 gate sizes in 0.35um process.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.11
• /
• pp.72-82
• /
• 1996

In this paper, newly developed algorithm for enhancing images corrupted by white gaussian noise is proposed. In the method proposed here, image is subdivided into a number of subblocks, and each block is separated into cimponents corresponding to signal and noise subspaces, respectively through the signal subspace method. A clean signal is then estimated form the signal subspace by the adaptive wiener filtering. The decomposition of noisy signal into noise and signal subspaces in is implemented by eigendecomposition of covariance matrix for noisy image, and by performing blockwise KLT (karhunen loeve transformation) using eigenvector. To reduce the perceptual noise level and distortion, wiener filtering is implementd by adaptively adjusting noise level according to activity characteristics of given block. Simulation results show the effectiveness of proposed method. In particular, edge bluring effects are reduced compared to the previous methods.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.85-88
• /
• 2000

Signal splitting and perfect reconstruction in subband coding is based on the assumption that quantization errors are negligible. But if subband signal is quantized, 4 types of errors occurs thus it is not impossible to do perfect reconstruction. These errors are QMF design error, aliasing error, signal error and random error. By using the QMF for subband splitting, the QMF error does not present. and by using the Lloyd-Max quantizer for the quantization and by using an appropriate synthesis filter, all signal dependent errors can be cancelled and the remaining error is random error which is uncorrelated with the original image〔1〕. In this thesis, Lenna and Camera-Man image are devided into 10 subbands by using the D4 and D20 wavelet And the subband signals are quantized by using the Lloyd-Max quantizer and the quantization errors are compared. and evaluated.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.27-30
• /
• 2003

In this paper a new approach of digitalized ‘Takbon’ is introduced. By image signal processing, the letters which were written on stones can be deciphered. Epigraphic letter is detected by digital image device, digital camera. The two dimensional digital image is preprocessed because of sensor noise and detective turbulence. Color image is transformed into grey level. The letter image is analyzed in time/frequency domain. By the resultant analysis data decisive functions are calculated. Signal Processing techniques, such as scaling, clipping, digital negative, high/low filter, morphology and so on, provide algorithms that can extract letter from stones.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.117-118
• /
• 2007

The received signal of ICS repeater is composed of BS(Base Station) and feedback signals. In this case, if the feedback signal is not rejected, system is oscillated. we use the IF signal for rejecting the feedback signal at ICS system. In general, SAW filter is used to reject the image of If signal. the use of this filter generates the system delay problems. In this paper, instead of SAW filter we use the Hilbert transform for rejecting image signal.