• The KIPS Transactions:PartB
• /
• v.9B no.1
• /
• pp.91-98
• /
• 2002

In this paper, an implementation method of the efficient image transmission stage using watermarking and channel ceding is proposed. Usually, image communication system consists of both a transmitter part and a receiver part. The transmitter part takes charge of copyright protection of the generated image data, and image coding and compression that can deal with channel noises when transmitting. In the transmitter part, we propose a channel coding method which protects both the watermark signal and the original signal for protecting the copyright of image data and solving channel noises when transmitting. Firstly, copyright protection of image data is conducted. For this, image structure analysis is performed, and both the improvement of image quality and the generation of the watermark signal are made. Then, the histogram is constructed and the watermark signals are selected from this. At this stage, by embedding of the coefficients of curve fittness into the lower 4 bits of the image data pixels, image quality degradation due to the embedding of watermark signals are prevented. Finally, turbo coding, which has the most efficient error correction capability in error correction codes, has been conducted to protect signals of watermark and preserved original image quality against noises on the transmission channel. Particularly, a new interleaving method named "semi random inter]easer" has been proposed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.4
• /
• pp.562-569
• /
• 2010

This paper analyzes the problems that occurred in the magnification process for a fine input image and investigates a method to improve the blurring of magnified image. This paper applies a curve interpolation algorithm in CAD/CAM for the same test images with the existing image algorithm in order to improve the blurring of magnified image. As a result, the nearest neighbor interpolation, which is the most frequently applied algorithm for the existing image interpolation algorithm, shows that the identification of a magnified image is not possible. Therefore, this study examines an interpolation of gray-level data by applying a low-pass spatial filter and verifies that a bilinear interpolation presents a lack of property that accentuates the boundary of the image where the image is largely changed. The periodic B-spline interpolation algorithm used for curve interpolation in CAD/CAM can remove the blurring but shows a problem of obscuration, and the Ferguson' curve interpolation algorithm shows a more sharpened image than that of the periodic B-spline algorithm. For the future study, hereafter, this study will develop an interpolation algorithm that has an excellent improvement for the boundary of the image and continuous and flexible property by using the NURBS, Ferguson' complex surface, and Bezier surface used in CAD/CAM engineering based on the results of this study.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.3 no.2 s.2
• /
• pp.31-38
• /
• 2005

Make-up changes facial images. In particular, eyebrow make-up is a part of changing expression most easily and effectively. While color make-up is helpful to produce women's desired image with their favorite colors, eyebrow make-up is hidden actor to give a clear impression to others. Therefore, this study connected facial type which is an important factor deciding facial image with eyebrow, examined image of eyebrow make-up and that changed by facial types and aimed to be helpful in producing more effective facial image with eyebrow make-up considering one's facial type. Consequently, it was found that eyebrow make-up was a great factor in making better facial impression and image and complementing the weakness of facial type. h strong impression of facial type can be changed into soft shape or foolish shape in worse case depending on the types of eyebrow make-up. Eyebrow make-up shows charming image as angle of eyebrow is steep, heavy image as eyebrow is horizontal, cold image as eyebrow tail rises and simple and dull image as it lowers. Therefore, it is known that image of eyebrow make-up can be governed by several factors including angle and direction of eyebrow. Consequently, it is thought that most effective eyebrow make-up considers individual facial types, images of their eyes, noses and mouths and factors deciding angle, direction and colors of eyebrow.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.1
• /
• pp.63-73
• /
• 2015

In this paper, a quality improvement scheme is proposed for magnified image using the various curved surface characteristics of image. After testing horizontal and vertical directional surface characteristics of source image, interpolation value is calculated to have the surface characteristics such as simple convex surface, simple concave surface, and compound surface. The calculated interpolation value become the value of the interpolated pixel of magnified image. The calculated interpolation value is closer to the pixel value of real image. So, the quality of the magnified image is improved. The PSNR value of the magnified image using the proposed scheme is larger than the PSNR values of the magnified image using the existing techniques.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.115-120
• /
• 2000

This study is on the application the image processing algorithm for inspection of the aluminium mill strip surface defect. The image of surface defect data was obtained using the CCD camera with the digital signal board. The edge was found from the difference of pixel intensity between the normal image and defect image. Two step were taken to find the edge in the image processing algorithm. First, noise was removed by using the median filter in the image. Second, the edge was sharpened in detail by using the sharpening convolution filter in the image. Canny algorithm was used to defect the exact edge. The defect section was separated from the original image is to find the coordination point p1 and p2 which include the defect image

• Korean Journal of Remote Sensing
• /
• v.36 no.4
• /
• pp.545-555
• /
• 2020

This paper focuses on automatic image registration between EO (Electro-Optical) and IR (InfraRed) satellite images with different spectral properties using block-based approach and simple preprocessing technique to enhance the performance of feature matching. If unpreprocessed EO and IR images from Kompsat-3A satellite were applied to local feature matching algorithms(Scale Invariant Feature Transform, Speed-Up Robust Feature, etc.), image registration algorithm generally failed because of few detected feature points or mismatched pairs despite of many detected feature points. In this paper, we proposed a new image registration method which improved the performance of feature matching with block-based registration process on 9-divided image and pre-processing technique based on adaptive histogram equalization. The proposed method showed better performance than without our proposed technique on visual inspection and I-RMSE. This study can be used for automatic image registration between various images acquired from different sensors.

• Journal of Digital Convergence
• /
• v.7 no.3
• /
• pp.75-82
• /
• 2009

The purpose of this study is explore the effect of brand marketing on the circulation structure factors as corporation image, brand image, and purchase intention and to clarify the causal sequence model in mobile phone corporation The results confirmed the suggested hypotheses. In addition, the analyses showed that effects of both brand marketing-related variables and the circulation structure factors as CI (corporation image) and BI(brand image) and PI(purchase intention) are mediated by the other variables. Based on the findings, the study showed that the effect of brand marketing indirectly on the purchase intention is mediated by corporation image and brand image in mobile phone corporation.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.355-356
• /
• 2007

This paper proposes a new panoramic image synthesis method using flash and no-flash image pairs, which reduces undesirable artifacts. Generally, in panoramic images, it is difficult to determine to use a flash in indoor environment. A flash image has unwanted artifacts such as hot spots and tunnel effect whereas a no-flash image also has artifacts like glass reflection. We derive cross projection tensors using flash and no-flash image pairs and transform the gradient field of a no-flash image using them. The image reconstructed from the modified gradient provides enhanced results, which are applied to synthesis of panoramic images. The proposed method can provide a better panoramic image than the conventional method. Experimental results show the effectiveness of the proposed method.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.168-173
• /
• 2011

In this paper, an optical image hiding technique using real-valued decoding key is proposed. In the embedding process, a each zero-padded original image placed in a quadrants on an input plane is multiplied by a statistically independent random phase pattern and is Fourier transformed. An encoded image is obtained by taking the real-valued data from the Fourier transformed image. And then a phase-encoded pattern, used as a hidden image and a decoding key, is generated by the use of multiple phase wrapping from the encoded images. A transmitted image is made from the linear superposition of the weighted hidden images and a cover image. In reconstruction process, the mirror reconstructed images can be obtained at two quadrants by the inverse-Fourier transform of the product of the transmitted image and the decoding key. Computer simulation and optical experiment are demonstrated in order to confirm the proposed technique.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.132-139
• /
• 2024

In this paper, we proposed an effective technique that uses location-based encryption technique and spatial encryption technique to improve security vulnerabilities in previous reversible data hiding technique that can hide twice as much confidential data as the NSAS technique. If the proposed technique is applied to hide confidential data in an image, the same amount of confidential data can be hidden compared to the previous technique, but the security of confidential data is greatly enhanced. By hiding confidential data in an image using the proposed technique, high-quality stego-image can be generated, making it impossible to visually distinguish whether confidential data is hidden in the image. Additionally, confidential data can be restored from stego-image without loss, and the original cover image can also be restored without loss. Through experiments, it was confirmed that when confidential data is hidden by applying the proposed technique, the quality of the stego-image is maintained up to 39.73dB, and the security of the stego-image is greatly strengthened.