• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.486-488
• /
• 2004

The SRI (Super Resolution Imager) uses the CCD (Charge coupled device) detector that is used to convert the light into electronic data. The purpose of the SRI is to obtain data for high resolution images by converting incoming light into digital stream of pixel data. The SRI has a high resolution, so this electronic system needs more fast imaging data processing, detector control and data transmission systems. This report describes the required system specification and manufactured electronic system for satellite.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.464-467
• /
• 2007

All image data acquisition systems for example the digital camera and digital camcorder, use the image sensor to convert the image data (light) into electronic data. These image sensors are used in satellite camera for high quality and resolution image data. There are two kinds of image sensors, the one is the CCD (charge coupled device) detector sensor and the other is the CMOS (complementary metal-oxide semiconductor) image sensor. The CCD sensor control system has more complex than the CMOS sensor control system. For the high quality image data on CCD sensor, the precise timing control signal and the several voltage sources are needed in the control system. In this paper, the comparison of the CCD with CMOS sensor, the CCD sensor characteristic, and the control system will be described.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.681-689
• /
• 2023

Purpose: Muons are characterized by a strong penetrating ability and can travel through thousands of meters of rock, making them ideal to image large volumes and substances typically impenetrable to, for example, electrons and photons. The feasibility of 3D image reconstruction and material identification based on a cosmic ray muons tomography (MT) system with triangular bar plastic scintillator detectors has been verified in this paper. Our prototype shows potential application value and the authors wish to apply this prototype system to 3D imaging. In addition, an MT experiment with the same detector system is also in progress. Methods: A simulation based on GEANT4 was developed to study cosmic ray muons' physical processes and motion trails. The yield and transportation of optical photons scintillated in each triangular bar of the detector system were reproduced. An image reconstruction algorithm and correction method based on muon scattering, which differs from the conventional PoCA algorithm, has been developed based on simulation data and verified by experimental data. Results: According to the simulation result, the detector system's position resolution is below 1 ~ mm in simulation and 2 mm in the experiment. A relatively legible 3D image of lead bricks in size of 20 cm × 5 cm × 10 cm used our inversion algorithm can be presented below 1× 10⁴ effective events, which takes 16 h of acquisition time experimentally. Conclusion: The proposed method is a potential candidate to monitor the cosmic ray MT accurately. Monte Carlo simulations have been performed to discuss the application of the detector and the simulation results have indicated that the detector can be used in cosmic ray MT. The cosmic ray MT experiment is currently underway. Furthermore, the proposal also has the potential to scan the earth, buildings, and other structures of interest including for instance computerized imaging in an archaeological framework.

• 대한디지털의료영상학회논문지
• /
• 제8권1호
• /
• pp.27-32
• /
• 2006

The rapid development in digital acquisition technology in radiography has not been accompanied by information regarding optimum radiolographic technique for use with an amorphus silicon flat panel detector. The purpose of our study was to compared imaging characteristics and image quality of an amorphus silicon flat panel detectors for digital chest radiography. All examinations were performed by using an amorphus silicon flat panel detector. Chest radiographs of an chest phantom were obtained with peak kilovoltage values of 60$\sim$150 kVp. Published data ell the effect of x-ray beam energy on imaging characteristics and image qualify when using an amorphus silicon flat panel detector. It is important that radiographers are aware of optimum kVp selection for an amorphus silicon flat panel detector system, particularly for the commonly performed chest examination.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.373-375
• /
• 2002

4D CT is a dynamic volume imaging system of moving organs with an image quality comparable to conventional CT, and is realized with continuous and high-speed cone-beam CT. In order to realize 4D CT, we have developed a novel 2D detector on the basis of the present CT technology, and mounted it on the gantry frame of the state-of-the-art CT-scanner. In the present report we describe the design of the first model of 4D CT-scanner as well as the early results of performance test. The x-ray detector for the 4D CT-scanner is a discrete pixel detector in which pixel data are measured by an independent detector element. The numbers of elements are 912 (channels) ${\times}$ 256 (segments) and the element size is approximately 1mm ${\times}$ 1mm. Data sampling rate is 900views(frames)/sec, and dynamic range of A/D converter is 16bits. The rotation speed of the gantry is l.0sec/rotation. Data transfer system between rotating and stationary parts in the gantry consists of laser diode and photodiode pairs, and achieves net transfer speed of 5Gbps. Volume data of 512${\times}$512${\times}$256 voxels are reconstructed with FDK algorithm by parallel use of 128 microprocessors. Normal volunteers and several phantoms were scanned with the scanner to demonstrate high image quality.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제11권1호
• /
• pp.29-34
• /
• 2022

모바일 디바이스 화면상의 클릭 가능한 객체를 인지하기 위한 데이터셋을 구축하고 새로운 네트워크 구조를 제안한다. 모바일 디바이스 화면에서 클릭 가능한 객체를 기준으로 다양한 해상도를 가진 디바이스에서 여러 애플리케이션을 대상으로 데이터를 수집하였다. 총 24,937개의 annotation data를 text, edit text, image, button, region, status bar, navigation bar의 7개 카테고리로 세분화하였다. 해당 데이터셋을 학습하기 위한 모델 구조는 Deconvolution Single Shot Detector를 베이스라인으로, backbone network는 기존 ResNet에 Squeeze-and-Excitation block을 추가한 Squeeze-and-Excitation networks를 사용하고, Single shot detector layers와 Deconvolution module을 Feature pyramid networks 형태로 쌓아 올려 header와 연결한다. 또한, 기존 input resolution의 1:1 비율에서 오는 특징의 손실을 최소화하기 위해 모바일 디바이스 화면과 유사한 1:2 비율로 변경하였다. 해당 모델을 구축한 데이터셋에 대하여 실험한 결과 베이스라인에 대비하여 mean average precision이 최대 101% 개선되었다.

• 대한교통학회지
• /
• 제25권2호
• /
• pp.7-15
• /
• 2007

ITS(Intelligent Transportation Systems)는 도로이용자에게 정확한 통행시간정보를 신속히 전달함으로써 도로이용의 효용 극대화를 목표로 하고 있다. 이러한 통행시간정보는 ITS장비에 의해 수집되는 자료를 기반으로 생성되므로 ITS장비의 신뢰성 유지가 매우 중요하지만 국내 설치 운영중인 ITS장비의 신뢰성을 확보하기 위한 교정(Calibration) 등과 같은 유지관리활동은 매우 미흡한 상태이다. 만약 고장, 수리, 교체 등과 관련된 장기간의 이력자료가 축적되어 있다면 신뢰성공학 등과 같은 기존 연구를 활용하여 체계적인 유지관리계획을 산정할 수 있겠지만, 현재 각 센터별로 충분한 이력자료를 확보하지 못하는 실정이다. 이에 본 연구에서는 설치 연도별로 영상검지기의 성능수준을 평가하고 시계열적인 분석을 위한 현장자료를 수집하였다. 또한 제조회사 설치년도 등 각각의 영상검지기의 특성이 동일하지 않기 때문에 발생하는 이분산성(heteroscedasticity) 문제를 고려하여 영상검지기의 정확도 감소 곡선을 추정하였다. 궁극적으로, 장기간의 이력자료 분석을 통해 체계적인 유지관리계획을 산정하여 ITS장비의 신뢰성을 유지하고 운영 관리하는 것이 바람직하겠지만 이력자료 축적에 소요되는 기간 동안 본 연구결과를 광범위하게 활용할 수 있을 것이다.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1804-1809
• /
• 2017

A data acquisition (DAQ) system based on oscilloscope was developed and evaluated for radiation detector. The dedicated LabVIEW program that perform the oscilloscope control and the data process was developed. Triggered events for each analog channel were acquired and the output signals were subsequently digitized and recorded for offline processing. Radiation pulse generation circuit was developed to evaluate the intrinsic characteristics of DAQ system. Energy linearity and energy resolution performances were assessed by voltage-peak channels and FWHM obtained from Gaussian fit, respectively. Radiation detector consists of LYSO and GAPD array. The 16 output signals were multiplexed by the RCD networks, and they were fed into the custom-made preamplifiers. Voltage-peak channels was linearly changed as a function of input voltage and the estimated coefficient of determination ($R^2$) was 0.999. No considerable changes in voltage resolution were observed. All 16 crystals were clearly identifiable on the resulting flood image and the mean energy resolution was ~15.1%. This study demonstrated that it is feasible to develop the DAQ system based on oscilloscope and LabVIEW program for radiation detector and the proposed approach offers opportunities to build simple DAQ system in various radiation measurement field.

• 한국군사과학기술학회지
• /
• 제22권2호
• /
• pp.162-169
• /
• 2019

This paper describes a thermal image processing algorithm for uncooled type TEC-less IR detector which is applicable to fire control system of small arms. We implemented a real-time gain and offset compensation algorithm based on polynomial approximation from the raw dataset which is acquired by two reference temperature of blackbody from various FPA(Focal Plane Array) temperature. Through the experiment, we analyzed the output characteristics of detector's raw-data and compared IR image quality to traditional non-uniformity correction method. It shows that the proposed method works well in all FPA temperature range with low residual non-uniformity.

• 전자공학회논문지B
• /
• 제31B권1호
• /
• pp.49-56
• /
• 1994

This paper describes the design principles and methods of electronic processor for thermal imager with the SPRITE detector, operating in the 8-12 micron band. The thermal imager consists of a optical scanner containing the detector and an electrical signal processor. The optical scanner utilizing rotating polygon and oscillating mirror, is 2-dimensional serial/parallel scan type using 5 elements of the detector. And the electronic processor has pre-processing of 5 chnanel's thermal signal from the detector, and performs digital scan conversion to reform the parallel data stream into serial analog data compatible with conventional RS-170 video. Through the designed electronic processor, we have acquired a satisfactory thermal image. And the MRTD (Minimum Resolvable Temperature Difference) is 0.5$^{\circ}$K at 7.5 cycles/mm.