• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.561-564
• /
• 2005

In this paper, we present a new JPEG (Joint Photograph Experts Group) compression architecture which compresses still image into fixed size of bitstream to use restricted system memory efficiently. The size of bitstream is determined by the complexity of image and the quantization table. But the quantization table is set in advance the complexity of image is the essential factor. Therefore the size of bitstream for high complexity image is large and the size for low complexity image is small. This means that the management of restricted system memory is difficult. The proposed JPEG encoder estimates the size of bitstream using the correlation between consecutive frames and selects the quantization table suited to the complexity of image. This makes efficient use of system memory.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.82-86
• /
• 1990

A camera type optical bench system equipped with a lens collimator and an image analyzer is fabricated to measure the equivalent focal length and distortion of lenses. This system is automatized by the computer which controls stepping motors. A nodal slide optical bench system equipped with an off axis reflective collimator is fabricated and improved by using rotating arms and air bearing system. distortion measurement on a wide angle lens using the camera method and the nodal slide method is reported. Defocusing error in the distortion measurement with the nodal slide optical bench is analyzed and improved by iteration method to search the correct image point.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.06a
• /
• pp.161-164
• /
• 2001

정밀한 자료처리를 위한 영상 분석도구의 개발과 더불어 영상 특성을 바탕으로 한 영상처리와 분석 방법의 개발은 좋은 연구 보조 도구가 된다. 외국의 수입에 의존적인 현재의 연구환경에서 개발자로서의 영상분석도구의 설계 및 구현은 고가의 장비를 대치할 만한 대체효과와 더불어 개인의 개발의지와 아이디어를 쉽게 반영하여 실습해 볼 수 있는 도구적 기능으로서의 효과를 가지게 된다. 본 논문에서는 의료영상 분석을 위한 영상분석도구를 설계 및 구현하여 의료영상에 대한 처리를 하여 보았다. 영상분석도구의 계속적인 개발은 영상처리 및 분석을 연구하는 개발자에게 좋은 실험도구가 될 것이 다.

• Journal of ILASS-Korea
• /
• v.7 no.3
• /
• pp.24-30
• /
• 2002

In the analysis of the mass distribution and SMD(Sauter Mean Diameter), planar laser imaging technique is a convenient and useful one when compared to the mechanical pattemator or PDPA (Phase Doppler Particle Analyzer). But recorded signals at cameras and intensity of laser are distorted by attenuation. Using experimental datum and assumptions, we study measurement errors due to attenuation in plannar image technique.

• Journal of Information Processing Systems
• /
• v.16 no.6
• /
• pp.1437-1446
• /
• 2020

For the last few years, smart devices have begun to occupy an essential place in the life of children, by allowing them to access a variety of language activities and books. Various studies are being conducted on using smart devices for education. Our study extracts images and texts from kids' book with smart devices and matches the extracted images and texts to create new images that are not represented in these books. The proposed system will enable the use of smart devices as educational media for children. A deep convolutional generative adversarial network (DCGAN) is used for generating a new image. Three steps are involved in training DCGAN. Firstly, images with 11 titles and 1,164 images on ImageNet are learned. Secondly, Tesseract, an optical character recognition engine, is used to extract images and text from kids' book and classify the text using a morpheme analyzer. Thirdly, the classified word class is matched with the latent vector of the image. The learned DCGAN creates an image associated with the text.

• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.11-11
• /
• 2003

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.521-533
• /
• 1995

This study was performed to develop and evaluate the method to detect Quantitatively the serial changes in the size of artificial lesion in the spongious bone by automatic color image analyzer. 15 intraoral radiograms taken before and after endodontic treatment of 5 cases were used for contour line analysis. 30 intraoral radiograms taken by geometrically standardized apparatus before and after serially the formation of artificial lesions of 0.80, 1.20, 1.75, 2.00mm in diameter at the periapical area and interdental area of spongious bone were used. The analysis of image according to the variance of lesion size by 0.25, 0.35, 0.55, and 0.85mm serially was performed by the histogram and the color enhancement with subtraction. The images inputted by CCDcamera were digitized and analyzed by NEXUS QUBE program with NEC PC-9801 computer. The obtained results were as follows: 1. There was no reliability in the analysis of lesions by contour line 2 .. The mean difference of the grey scale at each pixel was 1 step between reference image and the corrected images. 3. In the analysis by histogram of the artificial lesion in spongeous bone, the change over 0.55mm in the mesiodistal size was detectable by the change of the numbers of pixel showing the change in grey scale. 4. In the analysis by histogram of the artificial lesion in spongeous bone, the change over 0.25mm in the buccolingual size was detectable by the change in grey scale. 5. By color enbancement with- subtraction, each lesion was able to be isolated and the change in it's mesiodistal size was detectable visually , but not in it's buccolingual size.

• Journal of ILASS-Korea
• /
• v.4 no.1
• /
• pp.45-54
• /
• 1999

The spray characteristics of a direct injection multi-hole diesel nozzle having the 2-spring nozzle holder were investigated by using the image processing system and a PDPA(phase Bowler particle analyzer) system. The spray tip penetration, the spray angle, and the droplet diameter and velocity with the variation of the pump speed, injection quantity were measured. From, the experiments, we know that there are small droplets which are not to be detected with spray image around the leading edge of the spray. In order to represent the mean characteristics of the intermittent spray very well, it is very important to set the time windows accurately. From the measurements along the axis of the spray, close to the nozzle, the initially injected droplets are overtaken by droplets that follow them. And also there are the maximum axial mean velocity and SMD at the following part of the leading edge of the spray.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.6
• /
• pp.71-77
• /
• 2010

Although the problems of defects and nonmetallic inclusion in metal fatigue are very complicated, it is particularly important to view these problems from the perspective that defects and inclusions are virtually equivalent to small cracks. This concept will help one to understand various fatigue phenomena caused by Ductile Cast Iron. For different ferrite-pearlite matrix structure, containing more than 90% spheroidal ratio of graphite, GCD 45-3, GCD 50, GCD 60 series and 70%, 80%, 90% spheroidal ratio of graphite, GCD 40, GCD 45-1, GCD 45-2 series, this paper has carried out image analyzer, estimated maximum and mean size of graphite, investigated correlation. It was concluded as follows. (1) A good quality of Ductile cast iron using in this experiment, the graphite was separated well. The effect of the interaction by graphite was verified by microscopic observation and by fracture mechanics investigation in surface, interior of the specimen. (2)${\sqrt{area}}_{max}$ of graphite can be used to predict fatigue limit of Ductile Cast Iron. The Statistical distribution of extreme values of ${\sqrt{area}}$ may be used as a guide line for the control of inclusion size in the steel making processes.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.4 s.117
• /
• pp.68-75
• /
• 2006

Electromagnetic shielding sheet using the carbon and wood fiber mixture was manufactured in an effort to develop an electromagnetic shielding packaging material. Carbon fibers were cut into 5, 10, and 15 mm using the automatic cutting device and blown and dispersed using compression air passed through the fine nozzle. Then carbon fibers were slurried with water (0.1% consistency), and softwood kraft pulp along with cone starch were added. The wet mats were manufactured by dewatering in modified hand-sheet machine. The wet mats were pressed upto $4kgf/cm^2$ in the carbon and wood fiber mixture mat press. The wet mats were dried in the automatic controlled plate dryer. Investigation on the formation and surface structure of the newly developed carbon and wood fiber mixture electromagnetic shielding sheet were carried out using the scanning electron microscopy and the image analyzer. Finally electromagnetic shielding characteristics of the newly developed carbon and wood mixture sheet were measured using net-work analyser. The result was promising in the light of the fact that this method could open a new way to substitute the expensive imported electromagnetic shielding sheet.