• Journal of Information Display
• /
• 제8권4호
• /
• pp.5-9
• /
• 2007

We demonstrate an optically compensated bend (OCB) cell with pixel-isolating polymer wall. The polymer wall is formed by anisotropic phase separation of LCs and UV-curable polymer. The fabricated cell is initially in ${\pi}-twisted$ state so that it shows uniform and fast bend transition without any transition nucleus. The proposed cell has lower driving voltage than conventional OCB cell. Also, the polymer wall provides mechanical stability, hence preventing distortion of display image from external pressure.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.475-478
• /
• 2007

This study presents the use of multi-temporal JERS-1 SAR images to extract the land cover information and possibility. So far, land cover information extracted by high resolution aerial photo and field survey. The study site was located in Non-san area. This study developed on multi-temporal land cover status monitoring and coherence information mapping can be processing by L band SAR image. From July, 1997 to October, 1998 JERS SAR images (9 scenes) coherence values are analyzed and then extracted land cover information factors, so on. This technique which forms the basis of what is called SAR Interferometry or InSAR for short has also been employed in spaceborne systems. In such systems the separation of the antennas, called the baseline is obtained by utilizing a single antenna in a repeat pass

• KSTLE International Journal
• /
• 제1권1호
• /
• pp.59-62
• /
• 2000

This paper deals with an experimental study on the dynamic response of an elastomeric oil seal when the interferences between shaft and lip as well as the dynamic eccentricities are present. The dynamic response of seal lip in oil seals was observed with the aid of an image processing apparatus. The temperature of the seal lip edge, friction torque and the dynamic sealing gap between shaft and lip are measured at different conditions of the initial interference and the shaft eccentricity, The data were simultaneously measured under dynamic conditions. Experimental results show that, as the shaft speed is increased, S/e$_{d}$ has nearly reached a constant asymptotic value fur a certain range of shaft speeds. The results indicate that the gap separation between shaft and lip is provided due to the shaft eccentricity because the seal lip cannot follow quickly the radial displacements with increasing shaft speed.d.

• 전자공학회논문지B
• /
• 제28B권5호
• /
• pp.382-393
• /
• 1991

In this paper, we propose a method for recognizing printed Korean characters using the Preceding Layer Driven multi-layer perceptron. The new learning algorithm which assigns the weight values to an integer and makes use of the transfer function as the step function was presented to design the hardware. We obtained 522 Korean character-image as an experimental object through scanner with 600DPI resolution. The preprocessing for feature extraction of Korean character is the separation of individual character, noise elimination smoothing, thinnig, edge point extraction, branch point extraction, and stroke segmentation. The used feature data are the number of edge points and their shapes, the number of branch points, and the number of strokes with 8 directions.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.67.2-67.2
• /
• 2012

Graphene is expected to have a significant impact in various fields in the foreseeable future. For example, graphene is considered to be a promising candidate to replace indium tin oxide (ITO) as transparent conductive electrodes in optoelectronics applications. We report the tunability of the wavelength of localized surface plasmon resonance by varying the distance between graphene and Au nanoparticles [1]. It is estimated that every nanometer of change in the distance between graphene and the nanoparticles corresponds to a resonance wavelength shift of ~12 nm. The nanoparticle-graphene separation changes the coupling strength of the electromagnetic field of the excited plasmons in the nanoparticles and the antiparallel image dipoles in graphene. We also show a hysteresis in the conductance and capacitance can serve as a platform for graphene memory devices. We report the hysteresis in capacitance-voltage measurements on top gated bilayer graphene which provide a direct experimental evidence of the existence of charge traps as the cause for the hysteresis [2]. By applying a back gate bias to tune the Fermi level, an opposite sequence of switching with the different charge carriers, holes and electrons, is found [3]. The charging and discharging effect is proposed to explain this ambipolar bistable hysteretic switching.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.611-616
• /
• 2003

The headphone is regarded as the most effective means for reproducing 3-dimentional virtual sound due to its channel separation property. However, there still exist several serious problems in headphone reproduction, such as, 'front-back confusion' and in-head localization'. These well-known problems are in general assessed by the subjective test that is based on human judgment. In this paper, an objective test is conducted in parallel with the subject test in order to validate the objective reproduction performance. Such a combined approach may be a more scientific and systematic approach to the reproduction performance.

• 천문학회보
• /
• 제39권1호
• /
• pp.34-34
• /
• 2014

We investigate the constraints on the matter density ${\Omega}m$ and the cosmological constant ${\Omega}{\Lambda}$ using the gravitational lensed QSO (Quasi Stellar Object) systems from the Sloan Digital Sky Survey (SDSS) by analyzing the distribution of image separation. The main sample consists of 16 QSO lens systems with measured source and lens redshifts. We use a lensing probability that is simply defined by the gaussian distribution. We perform the curvature test and the constraints on the cosmological parameters as the statistical tests. The statistical tests have considered well-defined selection effects and adopt parameter of velocity dispersion function. We also applied the same analysis to Monte-Carlo generated mock gravitational lens samples to assess the accuracy and limit of our approach. As the results of these statistical tests, we find that only the excessively positively curved universe (${\Omega}m+{\Omega}{\Lambda}$ > 1) are rejected at 95% confidence level. However, if the informations of the galaxy as play a lens are measured accurately, we confirm that the gravitational lensing statistics would be the most powerful tool.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.207-210
• /
• 2007

We fabricated an optically compensated bend cell with pixel-isolating polymer wall. The polymer wall was formed by phase separation of LCs and UVcurable polymer. The fabricated cell had initially ${\pi}-twist$ state. It showed low driving voltage, wide viewing angle and fast response properties. Also, polymer wall provided the mechanical stability preventing distortion of a display image from pressure.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.135-139
• /
• 2001

This experimental study investigates the wake flow behind a pair of cylinders displaced normal to a free stream. In this experiment, the principal aim is to investigate the transition mechanism of the large vortex generating process in the wake having unique vortex shedding pattern. associated with the gap difference between the cylinders. The detailed visualization is carried out using the PIV measurement. The transition mechanism of the large generating vortex is clarified by showing the streak lines. the vorticity and the statistical fluctuating velocity distributions.

• 대한기계학회논문집B
• /
• 제28권7호
• /
• pp.800-808
• /
• 2004

Wind tunnel test of an airplane model with forward swept wing was done in KARI LSWT to evaluate and measure the aerodynamic characteristics of initially designed configuration. Since the given wing planform did not fully satisfy the design requirements, local flow control devices such as vortilon, vortex generator and flow fence were used to delay separation and to enhance aerodynamic characteristics. Also decision making processes of design parameters such as vertical tail boom length, the location, size and the incidence angle of horizontal tail were discussed. The general aerodynamic characteristics of forward swept wing for various control surface deflection conditions of flap, aileron and elevator were also given.