• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.3
• /
• pp.169-175
• /
• 2011

In this paper, an automatic scoring system of the OMR answer sheet is implemented using Gray Scale and image segmentation method. The proposed method was used to extract the OMR data on multiple-choice answer sheet from captured image. In addition, On-line scoring system is developed and implemented to mark the short-answer type on the reverse side. Therefore, teachers can mark the short-answer type for anytime and anywhere within the available time. There were many advantages to mark of the multiple-choice answer sheet without additional OMR reader. In the future, the grading of short-answer type will be more efficient if it were performed by using an automatic scoring system based on image processing.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.1
• /
• pp.13-18
• /
• 2008

Purpose: The image processing method due to the algorism which is various portion nuclear medical image decision is important it makes holds. The purpose of this study is it applies hereupon new image processing method SIEMENS (made by Pixon co.) Onco. flash processing reconstruction and the comparison which use the image control technique of existing the clinical usefulness it analyzes with it evaluates. Materials & Methods: 1. Whole body bone scan-scan speed 20 cm/min, 30 cm/min & 40 cm/min blinding test 2. Bone static spot scan-regional view 200 kcts, 400 kcts for chest, pelvis, foot blinding test 3. 4 quadrant-bar phantom-20000 kcts visual evaluation 4. LSF-FWHM resolution comparison ananysis. Results: 1. Raw data (20 cm/min) & processing data (30 cm/min)-similar level image quality 2. Low count static image-image quality clearly improved at visual evaluation result. 3. Visual evaluation by quadrant bar phantom-rising image quality level 4. Resolution comparison evaluation (FWHM)-same difference from resolution comparison evaluation Conclusion: The study which applies a new method Onco. flash processing reconstruction, it will be able to confirm the image quality improvement which until high level is clearer the case which applies the method of existing better than. The new reconstruction improves the resolution & reduces the noise. This enhances the diagnostic capabilities of such imagery for radiologists and physicians and allows a reduction in radiation dosage for the same image quality. Like this fact, rising of equipment availability & shortening the patient waiting move & from viewpoint of the active defense against radiation currently becomes feed with the fact that it will be the useful result propriety which is sufficient in clinical NM.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.40-43
• /
• 1997

This paper presents a 3D object recognition method for generation of 3D environmental map or obstacle recognition of mobile robots. An active light source projects a stripe pattern of light onto the object surface, while the camera observes the projected pattern from its offset point. The system consists of a laser unit and a camera on a pan/tilt device. The line segment in 2D camera image implies an object surface plane. The scaling, filtering, edge extraction, object extraction and line thinning are used for the enhancement of the light stripe image. We can get faithful depth informations of the object surface from the line segment interpretation. The performance of the proposed method has demonstrated in detail through the experiments for varies type objects. Experimental results show that the method has a good position accuracy, effectively eliminates optical noises in the image, greatly reduces memory requirement, and also greatly cut down the image processing time for the 3D object recognition compared to the conventional object recognition.

• Journal of Information Processing Systems
• /
• v.11 no.4
• /
• pp.495-508
• /
• 2015

In this paper, a novel robust medical images watermarking scheme is proposed. In traditional methods, the added watermark may alter the host medical image in an irreversible manner and may mask subtle details. Consequently, we propose a method for medical image copyright protection that may remedy this problem by embedding the watermark without modifying the original host image. The proposed method is based on the visual cryptography concept and the dominant blocks of wavelet coefficients. The logic in using the blocks dominants map is that local features, such as contours or edges, are unique to each image. The experimental results show that the proposed method can withstand several image processing attacks such as cropping, filtering, compression, etc.

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.139-146
• /
• 2006

In this paper vector code correlation(VCC) method and an algorithm to promote the image processing performance in building an effective measurement system using cameras are described for automatically berthing and controlling the ship equipped with side thrusters. In order to realize automatic ship berthing, it is indispensable that the berthing assistant system on the ship should continuously trace a target in the berth to measure the distance to the target and the ship attitude, such that we can make the ship move to the specified location. The considered system is made up of 4 apparatuses compounded from a CCD camera, a camera direction controller, a popular PC with a built in image processing board and a signal conversion unit connected to parallel port of the PC. The object of this paper is to reduce the image processing time so that the berthing system is able to ensure the safety schedule against risks during approaching to the berth. It could be achieved by composing the vector code image to utilize the gradient of an approximated plane found with the brightness of pixels forming a certain region in an image and verifying the effectiveness on a commonly used PC. From experimental results, it is clear that the proposed method can be applied to the measurement system for automatic ship berthing and has the image processing time of fourfold as compared with the typical template matching method.

• Journal of the Korea Society for Simulation
• /
• v.10 no.3
• /
• pp.59-70
• /
• 2001

Typical low-level image processing tasks require thousands of operations per pixel for each input image. Traditional general-purpose computers are not capable of performing such tasks in real time. Yet important features of traditional computers are not exploited by low-level image processing tasks. Since storage requirements are limited to a small number of low-precision integer values per pixel, large hierarchical memory systems are not necessary. The mismatch between the demands of low-level image processing tasks and the characteristics of conventional computers motivates investigation of alternative architectures. The structure of the tasks suggests employing an array of processing elements, one per pixel, sharing instructions issued by a single controller. In this paper we implemented various image processing filtering using the format converter. Also, we realized from conventional gray image process to color image process. This design method is based on realized the large processor-per-pixel array by integrated circuit technology This format converter design has control path implementation efficiently, and can be utilize the high technology without complicated controller hardware.

• Journal of ILASS-Korea
• /
• v.7 no.4
• /
• pp.23-31
• /
• 2002

In this study, the sizes and velocities of droplets in sprays were measured by image processing method from digital images of local region of sprays. The morphological method based on the Euclidean distance transform, Watershed separation, and perimeter image was adopted for the recognition and separation of overlapped particles. The match probability method was used for the particle tracking and pairing. The measurement results show that the present method may be reliable for the analysis of the motion and distribution of droplets produced by spray and atomization devices.

• Journal of Information Processing Systems
• /
• v.10 no.2
• /
• pp.256-270
• /
• 2014

A new morphed steganographic algorithm is proposed in this paper. Image security is a challenging problem these days. Steganography is a method of hiding secret data in cover media. The Least Significant Bit is a standard Steganographic method that has some limitations. The limitations are less capacity to hide data, poor stego image quality, and imperceptibility. The proposed algorithm focuses on these limitations. The morphing concept is being used for image steganography to overcome these limitations. The PSNR and standard deviation are considered as a measure to improve stego image quality and morphed image selection, respectively. The stego keys are generated during the morphed steganographic embedding and extracting process. Stego keys are used to embed and extract the secret image. The experimental results, which are based on hiding capacity and PSNR, are presented in this paper. Our research contributes towards creating an improved steganographic method using image morphing. The experimental result indicates that the proposed algorithm achieves an increase in hiding capacity, stego image quality, and imperceptibility. The experimental results were compared with state of the art steganographic methods.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.43-49
• /
• 2001

Although many kinds of stereo matching method have been developed in the field of computer vision and photogrammetry, wrong matches are not easy to avoid. This paper presents a new method to reduce wrong matches after matching, and experimental results are reported. The main idea is to analyze the histogram of the image attribute differences between each pair of image patches matched. Typical image attributes of image patch are the mean and the standard deviation of gray value for each image patch, but there could be other kinds of image attributes. Another idea is to check relative position among potential matches. This paper proposes to use Gaussian blunder filter to detect the suspicious pair of candidate match in relative position among neighboring candidate matches. If the suspicious candidate matches in image attribute difference or relative position are suppressed, then many wrong matches are removed, but minimizing the suppression of good matches. The proposed method is easy to implement, and also has potential to be applied as post processing after image matching for many kinds of matching methods such as area based matching, feature matching, relaxation matching, dynamic programming, and multi-channel image matching. Results show that the proposed method produces fewer wrong matches than before.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1425-1432
• /
• 2010

In large construction site, although soil conversion factor is so significant to preliminary design, operation design and calculating the cost of construction that it is important to take reasonable estimation and application, the standard of soil conversion factor for weathered ground doesn't clearly suggested yet. So in this study, at first we obtain the image using DSLR - high resolution camera and Laser scanner in the Haeng-Bok city constructin site, then analysis the ratio of soil and rock using various image processing method(Sobel method, Laplace method, Highpass filter, Hue and Saturation analysis). Mutual comparation with the result of image processing analysis and manual segmentation of 5case image in the cad. As a result, best image processing method was different for each case. In case of high propotion of rock, Laplace was best and in case of high propotion of soil, Highpass was best, and mixed case Laplace was best.