• Transactions on Electrical and Electronic Materials
• /
• v.5 no.1
• /
• pp.34-37
• /
• 2004

Amorphous chalcogenide thin films, especially a-(Se, S) based films, exhibit a number of photo-induced phenomena. In this study, we make the As$\_$40/Ge$\_$10/Se$\_$15/S$\_$35//Ag thin film and then we measure the holographic diffraction efficiency according to thickness of Ag. And we form the two-dimensional holographic grating. At first, we formed one-dimensional grating and then we form two-dimensional grating by rotate the sample. We found out the most suitable thickness of Ag and in case of As$\_$40/Ge$\_$10/Se$\_$15/S$\_$35//Ag(600${\AA}$), the diffraction efficiency was more higher than other samples. The holographic grating was formed by He-Ne laser(λ=632.8nm). The intensity of incident beam was 2.5mW and incident angle was 20$^{\circ}$. We confirm. the two-dimensional holographic grating by the pattern of diffracted beam and AFM(Atomic Force Microscope) image. We perform the etching process using by 0.26N NaOH in order to confirm clearly two-dimensional grating.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.7
• /
• pp.23-30
• /
• 2014

"Cut off line" in automotive passing beam has very important safety function because it serves for headlamp aiming. Headlights that are aimed incorrectly will not only perform poorly but also offend oncoming traffic. In addition, an objective definition of cut off line in low beam is necessary, since a requirement for correct aiming of the beams is specified within all the existing regulations. Accordingly, headlight regulations are requirements that automobiles must satisfy in order to be sold in a particular country. In this study, a more advanced recognition method for the cut off lines of the various headlamps commonly used in Europe, North America, and domestic is suggested and a headlamp testing system is developed to adjust the beam to the country-specific regulation. This system uses image processing technology to detect the cut off lines in the beam patterns of halogen headlamps, high-intensity discharge headlamps, and light-emitting diode headlamps as well.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.440-441
• /
• 2007

For this study, terbium-doped yttrium aluminum garnet (YAG:Tb) phosphor powders were prepared via the combustion process using the varous reagents. The characteristics of the synthesized nano powder were investigated by means of X-ray diffraction (XRD), Scanning Electron Microscope(SEM), and photoluminescence (PL). Single-phase cubic YAG:Tb crystalline powder was obtained at $1000^{\circ}C$ by directly crystallizing it from amorphous materials, as determined by XRD techniques. The SEM image showed that the resulting YAG:Tb powders had uniform sizes and good homogeneity. The photoluminescence spectra of the YAG:Tb nanoparticles were investigated to determinethe energy level of electron transition related to luminescence processes. There were three peaks in the excited spectrum, and the major one was a broad band of around 274 nm. Also, the YAG:Tb nanoparticles showed two emission peaks in the range of 450~500 nm and 525~560 nm, respectively, and had maximum intensity at 545 nm.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.519-525
• /
• 2018

Obtaining knowledge of the absorbed dose up-taken by a certain material when it is exposed to a specific ionizing radiation field is a very important task. Even though there are a plenitude of methods for determining the absorbed dose, each one has its own strong points and also drawbacks. In this article, an innovative idea for the development of a new gamma-ray dosimetry system is proposed. The method described in this article is based on optical colorimetry techniques. A color standard is fixed to the back of a BK-7 glass plate and then placed in a point in space where the absorbed dose needs to be determined. Gamma-ray-induced defects (color centers) in the glass plate start occurring, leading to a degree of saturation of the standard color, which is proportional, on a certain interval, to the absorbed dose. After the exposure, a high-quality digital image of the sample is taken, which is then processed (MATLAB), and its equivalent $I_{RGB}$ intensity value is determined. After a prior corroboration between various well-known absorbed dose values and their corresponding $I_{RGB}$ values, a calibration function is obtained. By using this calibration function, an "unknown" up-taken dose value can be determined.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.576-580
• /
• 2005

New real-time confocal microscopy using spectral encoding technique and slit confocal aperture is proposed and designed. Spectral encoding technique, which encodes one-dimensional spatial information of a specimen in wavelength, and slit aperture make it possible to obtain two-dimensional lateral image of the specimen simultaneously at standard video rates without expensive scanning units such as polygon mirrors and galvano mirrors. The working principle and the configuration of the system are explained. The variation in axial responses for the simplified model of the system with normalized slit width is numerically analyzed based on the wave optics theory. Slit width that directly affects the depth discrimination of the system is determined by a compromise between axial resolution and signal intensity from the simulation result. On the assumption of the lateral sampling resolution of 50 nm, design variables and governing equations of the system are derived. The system is designed to have the mapping error less than the half pixel size, to be diffraction-limited and to have the maximum illumination efficiency. The designed system has the FOV of $12.8um{\times}9.6um$, the theoretical axial FWHM of 1.1 um and the lateral magnification of-367.8.

• Journal of Korea Multimedia Society
• /
• v.10 no.2
• /
• pp.179-186
• /
• 2007

This paper proposes a novel method for face detection method using Zernike moments. To detect the faces in an image, local regions in multiscale sliding windows are classified into face and non-face by a neural network, and input features of the neural network consist of Zernike moments. Feature dimension is reduced as the reconstruction capability of orthogonal moment. In addition, because the magnitude of Zernike moment is invariant to rotation, a tilted human face can be detected. Even so the detection rate of the proposed method about head on face is less than experiments using intensity features, the result of our method about rotated faces is more robust. If the additional compensation and features are utilized, the proposed scheme may be best suited for the later stage of classification.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.7
• /
• pp.947-950
• /
• 2001

Cavernous angiomas are being increasingly well recognized throughout the central nervous system due to the widespread use of magnetic resonance imaging(MRI). However, these malformations are uncommon in the spinal column and rarely occur in the spinal cord. Here, we report a case of a cervical cord intramedullary cavernous angioma in a 49-year-old man. The patient had complained of left upper extremity paresthesia and weakness in the left hand for 5 days prior to admission. A neurological examination showed a left C-6 dermatome paresthesia and a weakness in the left hand grasping power. A MRI demonstrated a mixed signal intensity core at the C-5 level and a surrounding edema on the T-2 weighted image. Conservatively, a laminectomy was performed and slightly hard and well demarcated intramedullary mass was removed. A histological examination confirmed the diagnosis of a cavernous angioma.

• The KIPS Transactions:PartB
• /
• v.17B no.3
• /
• pp.207-214
• /
• 2010

A method of the region extraction and recognition of a traffic light and speed sign board in the real road environment is proposed. Traffic light was recognized by using brightness and color information based on HSI color model. Speed sign board was extracted by measuring red intensity from the HSI color information We improve the recognition rate by performing an incline compensation of the speed sign for directions clockwise and counterclockwise. The proposed algorithm shows a robust recognition rate in the image sequence which includes traffic light and speed sign board.

• Journal of Information Processing Systems
• /
• v.10 no.2
• /
• pp.283-299
• /
• 2014

Skin detection is used in many applications, such as face recognition, hand tracking, and human-computer interaction. There are many skin color detection algorithms that are used to extract human skin color regions that are based on the thresholding technique since it is simple and fast for computation. The efficiency of each color space depends on its robustness to the change in lighting and the ability to distinguish skin color pixels in images that have a complex background. For more accurate skin detection, we are proposing a new threshold based on RGB and YUV color spaces. The proposed approach starts by converting the RGB color space to the YUV color model. Then it separates the Y channel, which represents the intensity of the color model from the U and V channels to eliminate the effects of luminance. After that the threshold values are selected based on the testing of the boundary of skin colors with the help of the color histogram. Finally, the threshold was applied to the input image to extract skin parts. The detected skin regions were quantitatively compared to the actual skin parts in the input images to measure the accuracy and to compare the results of our threshold to the results of other's thresholds to prove the efficiency of our approach. The results of the experiment show that the proposed threshold is more robust in terms of dealing with the complex background and light conditions than others.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1828-1834
• /
• 2007

This study proposes a new digital watermarking technique based on wavelet transformation on color image. First the $YC_bC_r$ coordinates obtain from RGB color space. then, the correlation of watermark is decreased by Arnold transformation. Next, watermark which has been enlarged by Linear Bit-expansion is inserted at a given intensity in Color images' low frequency sub-bands. When detecting the presence of watermark, F-norm function is applied. As a result of the various experiments on color images, the proposed watermarking technique has outstanding quality in regards to fidelity and robustness.