• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.733-737
• /
• 2001

Heat generated from the electronic parts in PDP is undesirable physical properties. To attain optimal arrangement of the electronic parts in PDP, thermal flows in PDP should be analyzed. PIV measurement has been made to quantify the characteristics of the inner flows and outer flows of an actual PDP. The quantity of heat flux from PDP has been estimated using the PIV results. Measurement system consists of Ar-ion laser, CCD camera and an image grabber installed on a host computer.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.5
• /
• pp.338-346
• /
• 2001

An infrared imaging method in which direct measurement of energy gap variations can be achieved by digital image processing is proposed. This method allows economic and easy evaluation of the temperature coefficients of a semiconductor energy gap. The key components of the method are a polychromator, a computer equipped with a frame grabber and a variable temperature cryostat. Tentative experimentation conducted on LEC grown semi-insulating GaAs has resulted in a fairly good agreement with the theoretical model. This proposed method could be applicable for most compound semiconductors.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.6
• /
• pp.1281-1290
• /
• 2001

A study on the fluid flow with ultrasonic forcing is carried out to obtain data for the turbulence enhancement. A large water tank is made of the transparent acrylic plates and a horizontal flow field is given by setting two acrylic tubes to face mutually on a horizontal line. A 2-dimensional PlV system which is composed of a continuous-output 4W Argon-ion laser, a high-speed video camera, a PC based by an image grabber and a high resolution monitor is used to investigate characteristics of the complex turbulence flow field. And a 2MHz ultrasonic transducer is used fur ultrasonic vibration forcing. Some experiments are carried out at Reynolds numbers of 2,000 and 4,000 and at 7 angles of ultrasonic incidence. In results, the flew velocity vector distribution, kinetic energy and turbulence intensity in both cases of with and without ultrasonic forcing are examined, compared and discussed by using PIV measurement. It is clarified that the ultrasonic forcing into flow field is valid to obtain the turbulence enhancement.

• Journal of Biosystems Engineering
• /
• v.23 no.3
• /
• pp.285-290
• /
• 1998

Growth information of crops is essential for efficient control of greenhouse environment. However, a few non-invasive and continuous monitoring methods of crop growth has been developed. A computer vision system with a CCD camera and a frame grabber was developed to conduct non-destructive and intact plant growth analyses. The developed system was evaluated by conducting the growth analysis of lettuce. A linear model that explains the relationship between the relative crop coverage by the crop canopy and dry weight of a lettuce was presented. It was shown that this measurement method could estimate the dry weight from the relative crop coverage by the crop canopy. The result also showed that there was a high correlation between the projected top leaf area and the dry weight of the lettuce.

• Journal of Biomedical Engineering Research
• /
• v.14 no.4
• /
• pp.371-378
• /
• 1993

A new recognition algorithm which decides thge opening & the closing states of subject's eye and isn't affected by the subject's background is proposed. And it is tested in circumstances in which subject's motions are not restricted using the developed system. AERS (Automatic Eye opening & closing Recognition System) . The significant characteristic of the AERS is that it dosen't need any extra hardware except a formal CCD carmera and an image grabber but it works so well and so fast. The AFRS wcould be particularly well suited to a tray of communications of patients in a hospital, who can not communicate othertvise.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2054-2059
• /
• 2003

3D-PTV measurement was conducted on the wake of a goldfish in order to understand its swimming motions. The measurement system consisted of three CCD cameras, an image grabber, an Ar-Ion laser and a host computer. The flow properties of the wake of the goldfish were measured under three different velocities of the currents. Unsteady flow structures around the goldfish were quantitatively clarified using the time-consecutive instantaneous three-dimensional vectors obtained by the constructed 3D-PTV system.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.479-484
• /
• 2003

A non-contact 6D motion tracking system is proposed. The system consists of two color cameras, a color image grabber and a host computer, Motions of a floating vessel was measured by the constructed system. The instantaneous forces of the floating vessel are analyzed. The floating vessel was put on the water in a small water container in free conditions. The measured forces are reconstructed by the measurement results. The system can be used to non-contact measurements for 6D dynamic analysis of floating vessels.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1748-1753
• /
• 2003

3D-PTV measurement was conducted on the wake of a sphere. The Reynolds number is 1130 with the diameter(d=30mm). The measurement system consisted of three CCD cameras, an image grabber, an Ar-Ion laser and a host computer. An eigenvalue analysis was introduced for the analysis on the wake. Statistical turbulent properties were quantitatively clarified using the time-consecutive instantaneous three-dimensional vectors obtained by the 3D-PTV system. The spatial distributions of the sphere wake showed strong relations with spiral motions of the vortcies shedded from the surface of the sphere.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.249-252
• /
• 2002

Turbulent properties of the wake of a circular cylinder were measured The diameter of the cylinder is l0mm and the Reynolds number is 420. A new 3D-PTY system was constructed and a genetic algorithm (GA) was introduced in order to increase the number of instantaneous three-dimensional velocity vectors. In the GA two fitness functions were introduced in order to enhance the correspondences of the particles. The measurement system consists of three CCD cameras, Ar-ion laser, an image grabber and a host computer. More than 3000 instantaneous three-dimensional velocity vectors were obtained by the system. The database of the turbulent properties of the circular cylinder was constructed by the constructed 3D-PTV system.

• 한국가시화정보학회:학술대회논문집
• /
• 2001.12a
• /
• pp.6-13
• /
• 2001

A new GA-3D-PTV technique has been constructed to measure an impinging jet. The measurement system consists of three CCD cameras, Ar-ion laser, an image grabber and a host computer. GA (Genetic Algorithm) was used based on one-to-one correspondences in order to take advantage of the combinatorial optimization in tracking the pairs of the whole particles of the two images having a time interval. Two fitness functions were introduced in order to enhance the correspondences of the particles. One was based on a concept of the continuum theory and the other one was based on a minimum distance error. The constructed GA-3D-PTV system was applied in success to the measurement of flow characteristics of the impinging jet.