• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.211-214
• /
• 2002

Under a continuous manufacturing process, two dimension inspection system causes problems as blurring effect and low resolution and requires position calibration between frames. One dimension inspection system is, therefore, being researched as a substitution. In this paper, we implement mechanism of switching memory and processing data for reasonable one dimension inspection system. Redundant weft image and noise was suggested to be reduced by new method using modified morphological process and masked erosion process. From resulting image, line data and possible error information were obtained and constructed as a structure. Finally, error detecting algorithm was performed with this data structure. Processing time of error detecting was 0.625ms per line in applied system and experiment showed 94.7% of error detecting ability. This method is 20% faster in speed and 2.7% higher in error detecting ability comparing with the present method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.14-16
• /
• 2007

The statistics for the Gaussian noise mixed with impulsive noise are modelled. The denoising algorithm called amplitude-limited sample average filter is derived, which is optimal in terms of minimizing mean square errors under the assumption that contaminating noise is heavy-tailed Gaussian distributed. Its performance is shown to be excellent when image is corrupted mainly with Gaussian noise. However, it shows visually grainy output as the amount of impulsive noise increases. In order to overcome such problems, it is combined with the myriad filter to propose an amplitude-limited myriad filter. Simulation shows it effectively removes both Gaussian and impulsive noise, not blurring edges severey.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.159-165
• /
• 2012

The accurate focusing position should be determined for accurate measurements In VMS. Camera lens focusing is an important problem in computer vision and video measuring systems (VMS) that use CCD cameras and high precision XYZ stages. Camera focusing is a very important step in high precision measurement systems that use computer vision technique. The auto focusing process consists of two steps, the focus value measurement step and the exact focusing position determination step. It is suitable for eliminating high frequency noises with lower processing time and without blurring. An automatic focusing technique is applied to measure a crater with a one-dimensional search algorithm for finding the best focus. Throughout this paper, the suggested algorithm for the Auto focusing was combined with the learning. As a result, it is expected that such a combination would be expanded into the system of recognizing voices in a noisy environment.

• 한국의류학회지
• /
• 제28권9_10호
• /
• pp.1231-1241
• /
• 2004

The purpose of this study was to investigate the musicians' body image and fashion styles portrayed in Korea and American music' video in aspects of body dimension such as sex, race, nature, and technology. The results were as follows. In aspects of sex, male musicians showed the blurring of gender appearance, while female musicians reflected sexuality which intensified the gender norms. In aspects of race, musicians pursued the racial blending appearances. In nature and technology dimension, Korea music video focused on natural imagery, while American music video showed a lot of technology imagies. And, the body combined with the nature and technology implied the post human image in the future.

• International Journal of Contents
• /
• 제11권3호
• /
• pp.39-46
• /
• 2015

When host images are watermarked with CRT (Chinese Remainder Theorem), the watermark images are still robust in spite of the damage of the host images by maintaining the remainders in an unchanged state within some range of the changes that are incurred by the attacks. This advantage can also be attained by "zero-watermarking," which does not change the host images in any way. This paper proposes an improved zero-watermarking scheme for color images on the DCT (Discrete Cosine Transform) domain that is based on the CRT. In the scheme, RGB images are converted into YCbCr images, and one channel is used for the DCT transformation. A key is then computed from the DC and three low-frequency AC values of each DCT block using the CRT. The key finally becomes the watermark key after it is combined four times with a scrambled watermark image. When watermark images are extracted, each bit is determined by majority voting. This scheme shows that watermark images are robust against a number of common attacks such as sharpening, blurring, JPEG lossy compression, and cropping.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.569-571
• /
• 1998

In this paper, we propose a method of restoring blurred images by an edge-sensitive adaptive filter. The direction of the edge is estimated using the properties of 2-D block FFT. Reduction of blurring due to the added noise during image transfer and the focus of lens caused by shooting a fast moving object is very important. To remove this phenomenon effectively, we can use the edge information obtained by processing the blurred images. The proposed algorithm estimates both the existence and the direction of the edge. On the basis of the acquired edge direction information, we choose the appropriate edge-sensitive adaptive filter, which enables us to get better images than images obtained by methods not considering the direction of the edge. The performance of the proposed algorithm is shown in the simulation result.

• 스마트미디어저널
• /
• 제4권3호
• /
• pp.44-49
• /
• 2015

Text line segmentation is a preprocessing step in OCR, which can significantly influence the accuracy of document analysis applications. This paper proposes a novel methodology for the text line segmentation of handwritten documents. First, the average width of the connected components is used to form a 1-D Gaussian kernel and a smoothing operation is then applied to the input binary image. The adaptive binarization of the smoothed image forms the final text lines. In this work, the segmentation method involves two stages: firstly, the large connected components are labelled as a unique text line using text line area mapping. Secondly, the final refinement of the segmentation is performed using the Euclidean distance between the text line and small connected components. The group of uniquely labelled text candidates achieves promising segmentation results. The proposed approach works well on Korean and English language handwritten documents captured using a camera.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.102-105
• /
• 2003

Up to the present studies of the car number recognition system, it is generally known to have serious problems such as relatively long processing time due to the excessive length of data extracted from the number plate based on the current image characteristics, and the image blurring with the physical damage of the brightness and darkness signals of the number plate caused by external impulses with many difficulties in the extraction of the highlighted numbers. In this Paper we used the characteristics firstly having a constant brightness of number plate, and a high density to the horizontal axis, and the influences of highlighted signal could be reduced by making reflections less through the polarized filter on the camera for any highlighted signal. For the more, the data processing time and the noise reduction are effectively implemented by using the wavelet transform of time-space scale with the considerations on the physical loss and processing time.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3759-3766
• /
• 1996

In this paper a new gefchmique to measaure the creater wear using image processing and automatic focusing is presented. The contour detection algorithm, which can adopt ina noisy image, is suggested. It is suitable for eliminating high frequency noses with lower processing time and without blurring. An automatic focusing technique is applied to measure a createrwear depth with a one-dimensional search algorithm for finding the bestfocus. This method is implemented in the tool microscope driven by a servo motor. The results show that the countour and depth of crater wear can be measured reliably.

• Current Optics and Photonics
• /
• 제5권1호
• /
• pp.23-31
• /
• 2021

We propose a wheel screen type Lamina 3D display, which realizes a 3D image that can satisfy the accommodation cue by projecting volumetric images encoded by varying polarization states to a multilayered screen. The proposed system is composed of two parts: an encoding part that converts depth information to states of polarization and a decoding part that projects depth images to the corresponded diffusing layer. Though the basic principle of Lamina displays has already been verified by previous studies, those schemes suffered from a bottleneck of inferior resolution of the 3D image due to the blurring on the surfaces of diffusing layers in the stacked volume. In this paper, we propose a new structure to implement the decoding part by adopting a form of the wheel screen. Experimental verification is also provided to support the proposed principle.