• Solar Energy
• /
• v.8 no.2
• /
• pp.39-45
• /
• 1988

Photo-decomposition experiments to produce hydrogen from organic compound such as alcohols and organic acids were investigated using the Korean natural ilmenite, which was used as ore itself as well as the calcined in vacuum. The decomposition activities of alcohol on ore (30-60 mesh) which was not calcined did not decrease even if it was repeatedly used. But crushed ore which had newly formed ilmenite surface revealed enhanced activities. The ilmenite powder calcined in vacuum showed 3-8 times higher activies than the ore powder itself and also the decomposition activity of formic acid was much higher than that of alcohols.

• Resources Recycling
• /
• v.27 no.3
• /
• pp.30-38
• /
• 2018

In this study, the behaviors of Fe selective chlorination in ilmenite ore by using PVC or $CO-Cl_2$ gas mixture as reducing agents under the condition of 1173 K, for 60 minutes were investigated. The weight loss ratio was 28% when PVC was applied as the reducing agent. The condensate formed at the outlet of reaction tube was identified as $FeCl_2$ by X-ray diffraction analysis. From these results, it was observed that iron in ilmenite ore reacted with HCl gas and Fe was selectively removed in the form $FeCl_2$. However, when $CO-Cl_2$ gas mixture was used as a reducing agent, the weight reduction ratio was 54%, and the condensate formed at the outlet of reaction tube after the experiment was estimated to be $FeCl_3$. It was observed that the ilmenite ore reacted with the $CO-Cl_2$ gas mixture and was simultaneously removed in the form of $FeCl_3$ and $TiCl_4$. However, the results of X-ray diffraction of ilmenite ore after the reaction showed that Fe was almost removed.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.1
• /
• pp.25-37
• /
• 2010

Ilmenite ore bodies are deposited within the Precambrian anorthosite body distributed in the Hadonggun and Sancheonggun district, Gyeongsangnamdo. This study tries to identify the occurrence of ilmenite ore body in titanium mine area distributed in Wheolheongri, Okjongmyon, Hadonggun and six mining concession areas (Danseong claim no. 64, 65, 74, 75, 84, 85) in Danseongmyon, Sancheonggun. Wheolheongri ilmenite ore body occurs as vein with about 10~50 m width and 100 m length and shows NNE strike and NW dipping. High grade ore with $TiO_2$ 20 wt% in this area is distributed in intercumulated anorthosite and is sheared and brecciated. Ilmenite occurring in this type is commonly associated with hornbelnde. Ilmenite ore bodies distributed in Danseonggun, Sancheongmyon are deposited in layered anorthosite. They occur as stratiform with variable width from several and several tens meters. Ilmenite which is disseminated in the matrix is sheared and elongated. This type shows generally low grade ($TiO_2$ 1.0~6.0 wt%). The ilmenite ore bodies occur as vein and stratiform, and the former shows higher grade than the latter.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.4
• /
• pp.197-205
• /
• 2014

Study area (Jikjeon-ri) is located in south end of the Hadong anorthositic rocks. And along the south-western boundary, diorite intruded the Hadong anorthosite. Ilmenite ore bodies are extended in both anorthosite and diorite. And their occurrence in the diorite are not studied yet. While no particular textures are found in the ilmenite within the anorthosite, the ilmenite within the diorite shows characteristic exsolution texture, that is, ilmenite phases are separated into rutile and Fe-oxide and the ilmenite and Fe-oxide. MnO composition in ilmenite ratios are 2.14~3.74wt%, it has higher composition in diorite than that in anorthosite. The plagioclase composition display andesine ($An_{28.7-42.9}$) in the diorite and labradorite ($An_{57.1-72.8}$) in the anorthosite in composition. The exsolution of ilmenite has been developed during the cooling of partly melted ilmenite into rutile and Fe-oxides which is related to the intrusion of the diorite.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.4
• /
• pp.285-297
• /
• 2013

Ilmenite deposits are developed along the Precambrian intercumulated anorthosite body in Jikjeon-Ri, Bukcheon-Myeon, Hadong, Korea. Both detailed geological survey and drilling prospecting data for seven boreholes can be used to do resource estimation with GOCAD S/W. 3D modeling using geostatistics is applied to predict the shape and size of Ti ore bodies. As a result, 5 Ti ore veins occurred along N-S direction and average grade of Ti and ilmenite resources are calculated as 2.98 wt% Ti and 7,494,303 metric tons ilmenite ore reserves (Ti 223,330 t). This 3D modeling will be applied to the whole ilmenite deposits in Hadong-Sancheong area to predict the exact distribution and resources estimations of Ti ores.

• Economic and Environmental Geology
• /
• v.50 no.1
• /
• pp.35-44
• /
• 2017

The Hadong-Sancheong Proterozoic anorthosite complex occurs in the southwestern region of the Ryongnam massif. The geology of the area mainly consists of metamorphic rocks of the Jirisan metamorphic complex as basement rocks, charnockite, and the Hadong-Sancheong anorthosite, which are intruded by the Mesozoic igneous rocks. Hadong-Sancheong anorthosite complex is divided into the Sancheong anorthosite and the Hadong anorthosite which occur at north-southern and south area of the Jurassic syenite, respectively. The Hadong Fe-Ti-bearing dike-like ore bodies developed intermittently in the Hadong anorthosite with north-south direction and extend about 14 km. The Hadong Fe-Ti-bearing ore bodies consist mainly of magnetite and ilmenite with rutile, titanite, and minor amounts of sulfides(pyrrhotite, pyrite, chalcopyrite and sphalerite). The Hadong Fe-Ti-bearing ore bodies show a paragenetic sequence of magnetite-ilmenite ${\rightarrow}$ magnetite-ilmenite-pyrrhotite ${\rightarrow}$ ilmenite-pyrrhotite-rutile-titanite(and/or pyrite) ${\rightarrow}$ sulfides. Equilibrium thermodynamic interpretation of the mineral paragenesis and assemblages indicate that early Fe-Ti-bearing ore mineralization in the ore bodies occurs at about $700^{\circ}C$ which corresponds to oxygen fugacity of about $10^{-11.8}{\sim}10^{-17.2}$ atm with the decrease tendency of sulfur fugacity to about $10^0$ atm as equilibrium of $Fe_3O_4-FeS$. The change of ore mineral assemblages from Fe-Ti-bearing minerals to sulfides in late ore mineralization of the ore bodies indicates that oxygen fugacity would have slightly decreased to ${\geq}10^{-20.2}$ atm and increased sulfur fugacity to ${\geq}10^0$ atm.

• Economic and Environmental Geology
• /
• v.27 no.4
• /
• pp.345-361
• /
• 1994

Lens shaped titanomagnetite ore bodies in the Soyeonpyeong iron mine are embedded in amphibolites, which were intruded into Precambrian metasediments such as garnet-mica schist, marble, mica schist, and quartz schist. Mineral chemistry, K-Ar dating and hydrogen and oxygen stable isotopic analysis for the amphibolites and titanomagnetite ores were conducted to interpret petrogenesis of amphibolite and ore genesis of titanomagnetite iron ore deposits. Amphibolites of igneous origin have unusually high content of $TiO_2$, ranging from 0.94 to 6.39 wt.% with an average value of 4.05 wt.%. REE patterns of the different lithology of the amphibolite show the similar trend with an enrichment of LREE. Amphiboles of amphibolites are consist mainly of calcic amphiboles such as ferro-hornblende, tschermakite, ferroan pargasite, and ferroan pargasitic hornblende. K-Ar ages of hornblende from amphibolite and gneissic amphibolite were determined as $440.04{\pm}6.39Ma$ and $351.03{\pm}5.21Ma$, respectively. This indicates two metamorphic events of Paleozoic age in the Korean peninsula which are correlated with Altin orogeny in China. The titanomagnetite mineralization seems to have occurred before Cambrian age based on occurrence of orebodies and ages of host amphibolites. The Soyeonpyeong iron ores are composed mainly of titanomagnetite, ilmenite, and secondary minerals such as ilmenite and hercynite exsolved in titanomagnetite. The temperature and the oxygen fugacity estimated by the titanomagnetite-ilmenite geothermometer are $500{\sim}600^{\circ}C$ (ave. $550^{\circ}C$) and about $2{\pm}10^{-23}bar$, respectively. Hornblendes from ores and amphibolites which responsible for magnetite ore mineralization, have a relatively homogeneous isotopic composition ranging from +0.8 to +3.9 ‰ in ${\delta}^{18}O$ and from -87.8 to -113.3 ‰ in ${\delta}D$. The calculated oxygen and hydrogen isotopic compositions of the fluids which were in equilibrium with hornblende at $550^{\circ}C$, range from 2.8 to 5.9‰ in ${\delta}^{18}O_{H2O}$ and from -60.41 to -81.31 ‰ in ${\delta}D_{H2O}$. The ${\delta}^{18}O_{H2O}$ value of magnetite ore fluids are in between +6.4 to + 7.9 ‰. All of these values fall in the range of primary magmatic water. A slight oxygen shift means that $^{18}O$-depleted meteoric water be acted with basic fluids during immiscible processes between silicate and titaniferous oxide melt. Mineral chemistry, isotopic compositions, and occurences of amphibolites and orebodies, suggest that the titanomagnetite melt be separated immisciblely from the titaniferous basic magma.

• Economic and Environmental Geology
• /
• v.11 no.3
• /
• pp.89-98
• /
• 1978

Mineralogy, beneficiation, and processes of titanium ores are reviewed from petrographic viewpoints. The most important titanium minerals are ilmenite ($FeTiO_3$) and rutile ($TiO_2$). Ilmenite will play major role :for raw material, because rutile are rapidly diminishing. Thus, there is a need to develope a successful process for producing high grade Ti02 from ilmenite. Commercial, as well as R and D processes to treat more abundant ilmenite ores fall in three general classess: 1. Iron in ilmenite is partially or completely reduced and separated either physically or chemically. 2. Iron is reduced to ferrous state and chemically leached away from the titanium. 3. Ore is treated to make chlorides either selectively or with subsequent separation and purification of $TiC_4$. Routes and efficiencies of these process technologies are primarily influenced by the particular ore deposit to be mined and secondly by environmental considerations. One deposit parameters which influence ilmenite process technologies are: 1. Complexity of microtextures of ilmenite intergrown with Fe-oxide minerals. 2. Composition of concentrates; ilmenites contain minor amounts of substituted Mg, Mn, and V. These elements plus iron and gangue minerals can cause difficulties to complete reactions, substantial acid consumption, difficulties of removing waste solids, and waste disposal problems. Major contributions to be made by petrologists for process optimization are: characterization and interpretation of compositional and physical changes of raw materials and solids derived from process streams. These informations can play significant role in selecting and improving process steps for titania production.

• Economic and Environmental Geology
• /
• v.24 no.3
• /
• pp.227-232
• /
• 1991

Since "Gyeonsang Formation" has been introduced 90 years ago by B.Koto(1903), it was newly found within the lower Chomgog Formation ore mineralized zone. The mineralized zone occurs along the stratigraphic unit there. The ore minerals are mainly composed of hematite, ilmenite and magnetite. The molybdenum (2.100-3.100ppm?), copper and zinc are the accessories. There are also traces of cadmium, gadolinium, neptunium, ruthenium and tin. The ore mineralized zone shows about 1 km of apparent thickness with 10 to 12 degrees of plunging on the surface and extends 12 km along its strike in the U-Bo sheet(Chwae et al., 1990). The mineralized zone could be valuable to correlate the stratigraphic sequence between the Uisong and Mirryang subbasins, if giving consideration of the Palgongsan lineament (Chang, 1975).

• Journal of the Mineralogical Society of Korea
• /
• v.10 no.2
• /
• pp.114-125
• /
• 1997

The purpose of this study is to clarify the geological occurrence, mineralogical, physico-chemical and thermal properties of the sericite ore which located in Chungha area, Kyungsangbuk-do. The geology of this area are composed mainly of hornfels and some felsite porphyry. The sericitic ore is classified into sericite, sericite-quartz and quartz-sericite ore according to mineral assemblages. Mineral components in sericite ore are mainly sericite with minor quartz, apatite, sphene, zircon, ilmenite, bismuthinite, iron oxide and etc. Sericite-quartz ore are mainly composed of sericite and quartz. Accessary minerals are muscovite, epidote, zircon, sphene, iron oxide and etc. The chemical compositions of K2O, Al2O3, & Ignition loss in sericite and sericite-quartz ore increase than that of the host rock, while the composition of SiO2, Na2O & Fe2O3 decrease. Sericite and sericite-quartz ore are characterized by the specific gravity of 2.35 and 2.44, the pH of 4.36 cP and 2.36 cP respectively. The result of size analyses of sericite ore is 11.3% in grain volume concentration between 12.9 $\mu\textrm{m}$ and 11.1$\mu\textrm{m}$, and 32.3% between 9.6$\mu\textrm{m}$ and 12.9$\mu\textrm{m}$. The thermal expansivity of sericite and sericite-quartz ore show the similar pattern. The sericite ore shows the thermal expansivity of 0.31% at 50$0^{\circ}C$, 0.39~0.75% at 600~1,00$0^{\circ}C$ and 0.74% at 1,10$0^{\circ}C$. The sericite-quartz ore show the thermal expansivity of 0.29% at 50$0^{\circ}C$, 0.36~0.72% at 600~1,000% and 0.71% at 1,10$0^{\circ}C$.