• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.16 no.1
• /
• pp.27-35
• /
• 1980

The purpose of the present study is to find the light intensity which induces maximum gathering rate and to observe the variation of the gathering rate both in' daytime and at night by using two species of commercial fishes: rock bream, Oplegnathus fasciatus(Temminet et Schlegel) and glass-puffer,\ulcorner Fugu.niphobles (Jordan \ulcorneret. Snyder). An experimental tank($360L{\times}50W{\times}55H cm$) was set up in a dark room. An illumination system was attached to one end of the tank to control horizontal light intensity. Six artificial light sources were prepared by combination of two light bulbs (5W, 150W) and seven filters. During the. experiment water depth was maintained 50 em level in the tank. The tank was marked into six longitudinal sections each, being 60 cm long to observe the distribution of fish. The fish were acclimatized in dark condition for 40 minutes prior to the main experiment. Upon turning on the light, the number of fish in each section was counted40 times every 30 seconds, and the gathering rates were obtain from th~ average number of. fish' in each section. The light intensity inducing maximum gathering rate is as follows: rock bream: 162.0 lux (104,3--238, 1 lux) (day), 162.0 lux (104.3--238.1 lux) (night). grass puffer: 16.6 lux (10.6--24.5 lux) (day), 1. 9 lux (1. 2-2. 9 lUX) (night). Trend .of the gathering rate in illumination time revealed different results in two fish species. Gathering rate of rock bream showed the increasing trend fluctuately with the lapse of ' illumination time. However, that of grass puffer showed the increasing trend gradually at the early period of the illumination time and the uniform trend at the latter period with little distictive fluctuation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.2
• /
• pp.103-111
• /
• 2012

This paper introduces a novel concept of 'A Green LED Sensitivity Lighting System' which can automatically estimate QoS(quality of service) and emotional requirements of user using smart phone. And it can intelligently control ambient illumination lamp to conserve electric energy and to satisfy human sensitivity. The proposed system has 4 control modes; emotional lighting, smart lighting, green lighting and realistic lighting modes in order to comfort man's emotion, to maximize work efficiency, to save energy consumption and to make the entertainment more fun, respectively. When we choose green lighting mode for indoor office situations, an elaborate simulation shows that the proposed system with home network can reduce the energy by 50% compared to conventional light control system with a fixed time-based switching.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1083-1086
• /
• 2005

Light scattering measurement system that can evaluate light scattering characteristic from defects on silicon wafer surface has been developed. The system uses $Ar^+$ laser as an illumination source, and a highly sensitive photomultiplier tube (PMT) for detecting scattered light from defects. Unlike with conventional measurement system, our system has ability to measure scattered light pattern from wide range of scattering angles with changeable incidence condition. It is shown that our developed system is effective to discriminate the types and sizes of defects from basic experimental results using a microscatch and a PSL sphere.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.12
• /
• pp.54-60
• /
• 2000

Research about tool condition monitoring has been done until now for product automation and unmaned system. But it is hard to apply it to the industrial field due to its cost and reliability. This paper presents the new method of tool wear measurement using Marpos gauge. This is a kind of touch sensor, so its cost is lower than vision system. And it is not affected by dust and illumination, which are important in vision system. This proposed method use tool clearance angle to measure flank wear. Experimental results compared with vision system shows that this method is available for tool condition monitoring system.

• Journal of Biosystems Engineering
• /
• v.28 no.5
• /
• pp.439-448
• /
• 2003

An image processing algorithm was developed for a robot system which was used in gene study. The robot system achieved a job of colony picking. The colony included DNA of an organism. The robot picked up the colony in petri-dish, which included the cultivated colony in medium, by a picking pin, and moved the colony to wellplates. The vision system consisted of an image acquisition system which acquired the image information of colony, an illumination device which irradiated the object once when it got the image of it, a computer and so on. The image processing algorithm distinguished the colony and detected colony positions. Performance test of the developed algorithm showed that the distinguishing success rate of colony and detecting success rate of colony positions were over 96%.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.184-191
• /
• 2004

In this study, an inspection system for automotive parts using machine vision has been developed and presented. The system is comprised of six analog CCD cameras, frame grabber, and mechanism that loads the automotive parts to the system for the inspection. An Image processing algorithm for detecting eight different types of defects of oil-seals are developed, and the effectiveness of the algorithm is experimentally verified. Inspection process is completed in 1 second with acceptable accuracy. It is envisaged that this inspection system will have a wide application in the automotive part manufacturing industry in the future.

• Journal of ILASS-Korea
• /
• v.15 no.2
• /
• pp.67-73
• /
• 2010

The capability of pilot injection with small fuel quantity at all engine operating conditions is one of the main feature of the common rail direct injection system. The purpose of the pilot injection is to lower the engine noise and to reduce the NOx emissions. This study describes the pilot spray structure characteristics of the common-rail diesel injectors with different electric driving characteristics, including solenoid-driven and piezo-driven type. Namely three common-rail injectors with different electric current wave were investigated in this study. The pilot spray characteristics such as spray speed, spray tip penetration, and spray angle were obtained by spray images, which is measured by the back diffusion light illumination method with optical system for high-speed temporal photography. As this research results, it was found that pilot injection of common-rail system was effected by rate of injection with different electrical characteristic for injector driving.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.8
• /
• pp.751-755
• /
• 2010

In this paper, we proposed an omnidirectional ranging system that is able to obtain $360^{\circ}$ all directional distances effectively based on structured light image. The omnidirectional ranging system consists of laser structured light source and a catadioptric omnidirectional camera with a curved mirror. The proposed integro-differential structured light image processing algorithm makes the ranging system robust against environmental illumination condition. The omnidirectional ranging system is useful for map-building and self-localization of a mobile robot.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.3
• /
• pp.349-355
• /
• 2013

Recent high oil price results in the development of energy saving technology such as LED lighting system. Street-lighting system using COH LED package can save energy because the heat dissipation through cupper base is better than conventional technology. Studies on manufacturing processes of lighting system are insufficient even though LED package design and its heat analysis have been studied. This study focuses on the problem and solution of manufacturing processes such as LED packaging process, optimized emission angle, and LED bar dimension for mechanical assembly. As a result, we established better manufacturing alternatives of LED packaging and street-lighting system with higher lighting efficiency of 84 lm/W, as well as good illumination intensity of 39.7 lux at 6 m from lighting source.

• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.215-218
• /
• 2002

Gesture recognitions needed for various applications and is now gaining in importance as one method of enabling natural and intuitive human machine communication. In this paper, we propose a real time hand-signal recognition system in 3-dimensional space performs robust, real-time tracking under varying illumination. As compared with the existing method using classical pattern matching, this system is efficient with respect to speed and also presents more systematic way of defining hand-signals and developing a hand-signal recognition system. In order to verify the proposed method, we developed a virtual driving system operated by hand-signals.