• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.6
• /
• pp.267-274
• /
• 2023

In this paper, a method for estimating the illuminant chromaticity of a scene for an input image is proposed. The illuminant chromaticity is estimated using the illuminant reference region. The conventional method uses a certain number of reference lighting information. By comparing the chromaticity distribution of pixels from the input image with the chromaticity set prepared in advance for the reference illuminant, the reference illuminant with the largest overlapping area is regarded as the scene illuminant for the corresponding input image. In the process of calculating the overlapping area, the weights for each reference light were applied in the form of a Gaussian distribution, but a clear standard for the variance value could not be presented. The proposed method extracts an independent reference chromaticity region from a given reference illuminant, calculates the characteristic values in the r-g chromaticity plane of the RGB color coordinate system for all pixels of the input image, and then calculates the independent chromaticity region and features from the input image. The similarity is evaluated and the illuminant with the highest similarity was estimated as the illuminant chromaticity component of the image. The performance of the proposed method was evaluated using the database image and showed an average of about 60% improvement compared to the conventional basic method and showed an improvement performance of around 53% compared to the conventional Gaussian weight of 0.1.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.369-372
• /
• 2009

When measuring the luminous flux of a light source at the integrating sphere photometer, it can know the luminous flux to compare the standard lamp with the specimen lamp at the same location. But in case of PLS(plasma lighting system, microwave discharged lamp), that two lamps are cannot be the same location. If the reference illuminant and specimen lamp are cannot measure identical location, we should measure the variation of the luminous flux. For the outcome we can turn out a correction factor to revise and reflect it. But the better way is calibrate the specimen lamp locate the identical location of reference illuminant measured. In this thesis, we've test to find the correction factor for consider that change the measuring location. And it turns out the correction factor. From this, it presents the result to make a select for the reference illuminant which is against the illuminant type for newly produce.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.11
• /
• pp.26-32
• /
• 2011

In this study, a standard illuminant A type LED that has similar emission spectrum as the standard illuminant A was developed using LED chip(emission peak: 405[nm]) and four types of phosphors(blue, green orangered and red). Using the design of experiment for spectrum control, the trend of the change of spectrum shape influenced by the change of interaction among phosphors and their density could be examined. Computer simulation through the optimization of the design of experiment revealed that, among four phosphors, the most influential one on the shape of the spectrum was green phosphor. Using the obtained optimal combination ratio of the four phosphors, an alternative LED illuminant to the actual standard illuminant A was developed and the spectrums of these two were confirmed identical. Using this standard illuminant A type LED, a portable transmittance meter with the range of measurement error of ${\pm}1.0$[%] was developed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.110-121
• /
• 2016

The primary aim of the color constancy algorithm is to estimate illuminant chromaticity. There are various statistical-based, learning-based and combinational-based color constancy algorithms already exist. However, the statistical-based algorithms can only perform well on images that satisfy certain assumptions, learning-based methods are complex methods that require proper preprocessing and training data, and combinational-based methods depend on either pre-determined or dynamically varying weights, which are difficult to determine and prone to error. Therefore, this paper presents a new optimization based illuminant estimation method which is free from complex preprocessing and can estimate the illuminant under different environmental conditions. A strong color cast always has an odd standard deviation value in one of the RGB channels. Based on this observation, a cost function called the degree of illuminant tinge(DIT) is proposed to determine the quality of illuminant color-calibrated images. This DIT is formulated in such a way that the image scene under standard illuminant (d65) has lower DIT value compared to the same scene under different illuminant. Here, a swarm intelligence based particle swarm optimizer(PSO) is used to find the optimum illuminant of the given image that minimizes the degree of illuminant tinge. The proposed method is evaluated using real-world datasets and the experimental results validate the effectiveness of the proposed method.

• Proceedings of the Korean Printing Society Conference
• /
• 2000.04a
• /
• pp.35-44
• /
• 2000

Because Image on the CRT change under different illuminants, human is difficult to see original color of object. If what is information of used illuminant on capturing object know, image can be transformed according to viewing condition using the linear matrix method. To know information of used illuminant at an image, the spectral radiance of illuminant can be estimated using the linear model of Maloney and Wandell form an image. And then image can be properly transformed it using color appearance model. In this paper, we predict the spectral radiance of illuminant using spectral power distribution of specular light and using surface spectral reflectance at maximum gray area. and then we perform visual experiments for the corresponding color reproduction according to viewing condition. In results, we ensure that the spectral radiance of illuminant at an image can be well estimated using above algorithms and that human visual system is 70% adapted to the monitor's white point and 30% to ambient light when viewing softcopy images.

• Journal of Korea Multimedia Society
• /
• v.7 no.10
• /
• pp.1370-1377
• /
• 2004

The still image and video of the same scene taken under various condition show different color, and the most important factor of capture condition is scene illuminant. The average color of contents is determined along the color temperature of scene illuminant, the method for conversion of scene illuminant chromaticity is needed. In this paper, the method for converting the scene illuminant chromaticity from arbitrary correlated color temperature to another arbitrary one is proposed. Conventional method only defines several set of color temperature conversion that can be evaluated as representative ones. The proposed method has the merit of calculating the conversion function directly from arbitrary color temperature to another one.

• Journal of Broadcast Engineering
• /
• v.19 no.1
• /
• pp.75-82
• /
• 2014

This paper proposes an illuminant compensation method using a camera noise analysis without segmentation in the dichromatic reflectance model. In general, pixels within highlight regions include large amounts of information on the image illuminant. Thus, the analysis of highlight regions provides a relatively easy means of determining the characteristics of an image illuminant. Currently, conventional methods require regional segmentation and the accuracy of this segmentation then affects the illuminant estimation. Therefore, the proposed method estimates the illuminant without segmentation based on a conformity assessment of highlight regions. Furthermore, error factors, such as noise and sensor non-uniformity, can be reduced by the conformity assessment.

• Journal of Broadcast Engineering
• /
• v.21 no.1
• /
• pp.51-59
• /
• 2016

This paper presents a method of DCT-based illuminant compensation to enhance the accuracy of face recognition under an illuminant change. The basis of the proposed method is that the illuminant is generally located in low-frequency components in the DCT domain. Therefore, the effect of the illuminant can be compensated by controlling the low-frequency components. Moreover, a directional high-order local pattern descriptor is used to detect robust features in the case of face motion. Experiments confirm the performance of the proposed algorithm got up to 95% when tested using a real database.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.251-258
• /
• 2004

This paper proposes a method for estimating the illuminant chromaticity using the distributions of the camera responses obtained by a CCD camera in a real-world scene. Illuminant estimation using a highlight method is based on the geometric relation between a body and its surface reflection. In general, the pixels in a highlight region are affected by an illuminant geometric difference, camera quantization errors, and the non-uniformity of the CCD sensor. As such, this leads to inaccurate results if an illuminant is estimated using the pixels of a CCD camera without any preprocessing. Accordingly, to solve this problem the proposed method analyzes the distribution of the CCD camera responses and selects pixels using the Mahalanobis distance in highlight regions. The use of the Mahalanobis distance based on the camera responses enables the adaptive selection of valid pixels among the pixels distributed in the highlight regions. Lines are then determined based on the selected pixels with r-g chromaticity coordinates using a principal component analysis(PCA). Thereafter, the illuminant chromaticity is estimated based on the intersection points of the lines. Experimental results using the proposed method demonstrated a reduced estimation error compared with the conventional method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.3
• /
• pp.292-303
• /
• 2001

Object color can be determined by the characteristic of scene illuminant and surface. In this paper, perceived illumination effect is extended and with the highlight analysis, hybrid approach is proposed to estimate the illuminant chromaticity. The perceived illumination approach provides a stable candidate range for the estimation of illuminant chromaticity, however, the accuracy is slightly degraded depending on the image contents. The highlight approach does not depend on the image contents and provides an accurate solution of the scene illuminant chromaticity, however, it is difficult to determine the final solution among many cross-points. These two approaches are in effect mutually compensating. The solution from perceived illumination can be used as a starting point or as base information for the highlight approach to get the final solution.