• 척추신경추나의학회지
• /
• 제5권1호
• /
• pp.49-56
• /
• 2010

본 증례는 골절 치유 과정에서 치유기간의 연장을 가져올 수 있는 심한 골다공증에 이환된 환자에게 약한 충격으로 야기된 골반골절 환자에 대하여 침상 안정과 함께 침구 및 부항치료, 약침치료, 한약물치료를 실시하여, 환자가 느끼는 통증 정도를 측정하는 VAS 및 일상 생활 장애의 정도를 반영하는 ODI의 감소, 3차원 전산화단층촬영 상 골절 치유라는 결과를 얻었기에 이를 보고하는 바이다.

• Journal of Korean Neurosurgical Society
• /
• 제61권1호
• /
• pp.75-80
• /
• 2018

Objective : Among the various sacropelvic fixation methods, S2 alar-iliac (S2AI) screw fixation has several advantages compared to conventional iliac wing screw. However, the placement of S2AI screw still remains a challenge. The purpose of this study was to describe a novel technique of free hand S2AI screw insertion using a K-wire and cannulated screw, and to evaluate the accuracy of the technique. Methods : S2AI screw was inserted by free hand technique in sixteen consecutive patients without any fluoroscopic guidance. The gearshift was advanced to make a pilot hole passing through the sacroiliac joint and directing the anterior inferior iliac spine. A K-wire was placed through the pilot hole. After introducing a cannulated tapper along with the K-wire, a cannulated S2AI screw was installed over the K-wire. Results : Thirty-three S2AI screws were placed in sixteen consecutive patients. Thirty-two screws were cannulated screws, and one screw was a conventional non-cannulated screw. Thirty out of 32 (93.8%) cannulated screws were accurately positioned, whereas two cannulated screws and one non-cannulated screw violated lateral cortex of the ilium. Conclusion : The technique using K-wire and cannulated screw can provide accurate placement of free hand S2AI screw.

• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.19-28
• /
• 2006

This paper describes rapid prototyping (RP) and reverse engineering (RE) application for orthopedic surgery planning to improve the efficiency and accuracy of the orthopedic surgery. Using the symmetrical characteristics of the human body, CAD data of undamaged bone of the injured area are generated from a mirror transformation of undamaged bone data for the uninjured area. The physical model before the injury is manufactured from Poly jet RP process. The surgical plan, including the selection of the proper implant, pre-forming of the implant and decision of fixation positions, etc., is determined by a physical simulation using the physical model. In order to examine the applicability and efficiency of the surgical planning technology, two case studies, such as a distal tibia comminuted fracture and an iliac wing fracture of pelvis, are carried out. From the results of the examination, it has been shown that the RP and RE can be applied to orthopedic surgical planning and can be an efficient surgical tool.

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.188-196
• /
• 2004

The objective of this paper is to propose a new technology of the orthopaedic surgery using the combination of reverse engineering (RE) based on CT data and rapid prototyping (RP). The proposed technology utilizes symmetrical characteristics of the human body and capability of the combination of RE and RP, which rapidly manufactures three-dimensional parts from CT data. The original .stl data of injured extents are generated from the mirror transformation of .stl file fur uninjured extents. The physical shape before injuring is manufactured from RP using the original .stl data. Subsequently, pre-operative planning, such as a selection of proper implants, preforming of the implant, a decision of fixation locations and an insert position for the implant, an estimation of the invasive size, and pre-education of operators are performed using the physical shape. In order to examine the applicability and the efficiency of the proposed surgical technology, various case studies, such as a distal tibia commented fracture, a proximal tibia plateau fracture and an iliac wing fracture of pelvis, are carried out. From the results of case studies, it has been shown that the proposed technology is an effective surgical tool of the orthopaedic surgery reducing the operational time, the operational cost, the radiation exposure of the patient and operators, and morbidity. In addition, the proposed technology could improve the accuracy of operation and the speed of rehabilitation.

• 한국임상수의학회지
• /
• 제34권5호
• /
• pp.370-373
• /
• 2017

Sacroiliac dislocation is the separation of the iliac wing from the pelvic bone and needs to be repaired by surgery. Corrective surgical methods include open reduction and minimally invasive techniques. In the present study, we used a minimally invasive surgical technique in seven dogs with sacroiliac dislocation. Five cases had unilateral sacroiliac joint luxation and two cases had bilateral sacroiliac joint luxation; all were referred to hospital after being hit by an automobile. All cases were treated with a fluoroscope-assisted, minimally invasive technique. Patients were evaluated by measuring surgery time, postoperative ambulatory time, and calculating pelvic canal diameter ratios. Surgery time was measured from initial incision to completion of skin closure. Mean surgery time was 30.6 minutes in unilateral sacroiliac joint luxation and 68 minutes in bilateral sacroiliac joint luxation. Mean preoperative pelvic canal diameter ratio was 1.22 (${\pm}0.27$), immediate postoperative pelvic canal diameter ratio was 1.26 (${\pm}0.10$), and at 2 weeks after surgery, the pelvic canal diameter ratio was 1.37 (${\pm}0.22$). All cases were ambulatory within 1 week and mean postoperative ambulatory time was 5 days. Based on the results, the use of a minimally invasive technique for correction of sacroiliac dislocation can decrease surgical time, lessen operative and postoperative burdens on patients, and provide owners with a good prognosis.

• 대한수의학회지
• /
• 제28권1호
• /
• pp.1-16
• /
• 1988

The anatomical structure of pelvic limb, of thirty-one adult Korean native goats (Body weight: 14~17kg) was observed after skeletal preparation, and the osteometry was performed in each bone. The results were as follows: 1. The pelvic limb of the Korean native goat was composed of the hip bone, femur, patella, tibia, fibula, tarsal bones, metatarsal bone, phalanges and sesamoid bones. 2. The hip bone consisted of the ilium, ischium and pubis which fused each other, The gluteal surface of the ilium was directed dorsolaterally. The tuber sacrale and tuber coxae were formed at the dorsal apex and ventrolateral part of the iliac wing, respectively. The lesser ischiatic notch was deeper than the greater one. The ischiatic tubercles were triangular form and consisted of the dorsal, lateral and caudal ischiatic tubercles. The left and right hip bone indexes were 67.08, 66.20, the acetabular indexes were 93.78 and 92.10 and the obturator foramen. indexes were 53.84 and 54.77, respectively. 3. In femur, both of the greater and lesser trochanter were well developed but the third trochanter was not observed. The left and right femur indexes were 26.55 and 26.14, head indexes were 81.66 and 81.49 and the trochlear-epicondyle indexes were 42.47 and 41.63, respectively. 4. The patella was observed as an isosceles triangle with base lying proximal and the cranial surface was more convex. 5. The tibial shaft was sigmoid form and the popliteal notch was deep. There was a large nutrient foramen at the cranial aspect of the cranial intercondylar area. The tibial indexes were 22.09 in left and 21.10 in right. 6. The proximal extremity of the fibula was fused with the lateral condyle of the tibia but the distal one was observed independently as the malleolar bone. 7. The tarsal bones were five in number; the talus, calcaneus, centroquartal tarsal bone, first tarsal bone, and second-third tarsal bone. 8. The metatarsal bone was composed of a large metatarsal bone. resulted from the fusion of the third and fourth metatarsal bones, The structure of metatarsal bone was similar to the metacarpal bone but longer about 7mm. 9. The phalanges and sesamoid bones were similar to these of the thoratic limb. 10. The ratios of the lengths among the hip bone, femur, tibia and metafarsal bone were 1.71 : 1.54 : 1.73 : 1.00 in left and 1.68 : 1.53 : 1.72 : 1.00 in right, respectively.

• 대한골관절종양학회지
• /
• 제1권2호
• /
• pp.133-144
• /
• 1995

고관절 제거후 재건을 위한 방법으로서의 안장형 인공 고관절 치환술은 동종골 이식술후 고관절 전치환술, 열처리한 자가골 재삽입 후 고관절 전치환술, 좌골 대퇴골간 유합술, 가동 관절로 그대로 두는 방법 등에 비해서 수술 시간의 단축에 의한 감염율 및 기타 이환율의 감소, 술후 조기 보행 가능, 좌식 생활을 하는 한국인의 생활에 편리한 이점이 있다. 이 방법은 Modular system으로 다리 정렬 상태를 잘 보존시킬 수 있으며 필요하다면 추후 골 재건술도 할 수 있는 장점이 있다. 저자들은 비구를 침범한 악성 골 종양을 제거 고관절의 재건을 위해 3예에서 안장형 인공 고관절 치환술을 시행하였다. 이중 1예에서 가역성 서혜부 탈장이 관찰되었으나 12개월, 19개월(사망), 27개월의 추시 관찰 결과 자가 보행, 계단 오르내리기가 가능하고, 쪼그려 앉기와 방바닥에 앉을 수 있으며, 통증없이 일상적인 생활을 할 수 있었다. 따라서, 비구를 침범한 골 종양 제거후의 고관절 재건술의 좋은 방법으로 판단되어 이에 문헌 고찰과 함께 보고하는 바이다.