• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.383-386
• /
• 2006

HTPB/AP 혼합형 추진제(A형)와 니트라민계 산화제가 소량 함유된 추진제의 진공 점화 특성을 고찰하였다. A형 추진제의 임계 점화 압력은 4psia로 판단되었고, AP의 일부를 HMX와 HNIW로 $5\sim15%$ 치환한 니트라민계 혼합형 추진제(B형)에서는 임계 압력은 0.4psia, 점화지연시간은 50% 이상 향상되었다. 이러한 이유는 HMX나 HNIW 성분이 AP에 비해 낮은 온도$(\sim220^{\circ}C)$에서 발열 분해되는 특성에 기인되는 것으로 보인다. 점화도움물질인 $B/KNO_3$를 추진제 표면에 코팅한 결과, 15% 정도 점화성이 개선되는 효과를 보였다. $B/KNO_3$ 점화제에 2차 결합제로 NC를 소량 사용하고, 이를 추진제 그레인의 점화도움물질로 적용하였다.

• 한국추진공학회지
• /
• 제10권3호
• /
• pp.67-72
• /
• 2006

HTPB/AP 혼합형 추진제(A형)와 니트라민계 산화제가 소량 함유된 추진제의 진공 점화 특성을 고찰하였다. 추진제의 임계 점화 압력은 4 psia로 판단되었고, AP의 일부를 HMX와 HNIW로 $5{\sim}l5%$ 치환한 니트라민계 혼합형 추진제(B형)에서 임계 압력은 0.4 psia, 점화지연시간은 50% 이상 향상되었다. 이는 HMX나 HNIW가 AP에 비해 낮은 온도(${\sim}220^{\circ}C$)에서 발열 분해되는 특성에 기인되는 것으로 보인다. 점화도움물질인 $B/KNO_3$를 추진제 표면에 코팅한 결과,15% 정도 점화성이 개선되었다. $B/KNO_3$에 2차 결합제로 NC를 소량 사용하고, 이를 추진제 그레인의 점화도움물질로 적응하였다.

• 에너지공학
• /
• 제4권2호
• /
• pp.297-302
• /
• 1995

Ignition of a reactive solid in a shape of square corner by a hot surface is studied theoretically. Ignition time and the location of ignition point are determined as a function of dimensionless parameters, with the use of the homogeneous model of ignition. The effect of geometry on the ignition of solid fuel results in the local characteristics: the reaction is initiated in a hot point in depth of the substance. It is shown that ignition time is proportional to the dimensionless initial temperature, whereas for the ignition of the semiinfinite body this dependence was quadratic.

• 한국가스학회지
• /
• 제16권2호
• /
• pp.45-51
• /
• 2012

최소자연발화온도는 가연성혼합물이 화염이나 스파크 없이 주위로부터 충분한 열에너지를 받아서 스스로 발화하는 최저온도를 말한다. 본 연구에서는 ASTM E659 장치를 이용하여 가연성 혼합물인 n-Pentanol+Ethylbenzene계를 구성하는 순수물질과 혼합물의 최소자연발화온도를 측정하였다. Pentanol과 Ethylbenzene의 측정된 최소자연발화온도는 각 각 $285^{\circ}C$, $475^{\circ}C$ 였다. 그리고 n-Pentanol+Ethylbenzene 계의 예측된 최소자연발화온도는 실험값과 적은 평균절대오차에서 일치하였다.

• 한국안전학회지
• /
• 제19권2호
• /
• pp.54-60
• /
• 2004

Flammable substances are frequently used chemical industry processes. An accurate knowledge of the ALTs(Autoignition Temperatures) is important in developing appropriate prevention and control measures in industrial fire protection. The AITs describe the minimum temperature to which a substance must be heated, without the application of a flame or spark, which will cause that substance to ignite. The AITs are dependent upon many factors, namely initial temperature, pressure, volume, fuel/air stoichiometry, catalyst material, concentration of vapor, ignition delay. This study measured relationship between the AITs and the ignition delay times by using ASTM E659-78 apparatus for methanol and ethanol. The A.A.P.E.(Average Absolute Percent Error) and the A.A.D.(Average Absolute Deviation) of the experimental and the calculated delay times by the AITs for methanol were 14.59 and 1.76 respectively. Also the A.A.P.E. and the A.A.D. of the experimental and the calculated delay times by the ATIs for ethanol were 8.33 and 0.88.

• 한국화재소방학회논문지
• /
• 제18권2호
• /
• pp.27-33
• /
• 2004

화학물질의 최소자연발화온도의 정확한 지식은 산업화재를 예방하고 제어하는데 중요하다. 최소자연발화온도(AIT)는 화염이나, 스파크 없이 주위로부터 충분한 에너지를 받아서 스스로 점화할 수 있는 최저온도를 말한다. AIT는 실험 개시온도, 압력, 농도, 용기의 크기, 양론혼합비, 촉매, 증기의 농도, 발화지연시간 등 많은 인자에 영향을 받는다. 본 연구에서는 1994년에 제작된 ASTM E659-78 장치를 이용하여 산류(Acids) 발화지연시간과 AIT관계를 측정하였고, 실험에서 얻은 자료는 본 연구에서 제시한 예측 모델과 적은 오차 범위에서 일치하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1995년도 제5회 학술강연회논문집
• /
• pp.11-30
• /
• 1995

The ignition characteristics of a reactive solid with rough surface by constant heat flux were studied. The geometry of surface was represented by a set of identical protrusions having a shape of wedge based on the block of reactive solid. Several regimes of ignition were found, depending on the ratio of the protrusion length and the depth of the heated layer, formed in course of ignition process: 1) when the substance is ignited as the massive block, and the effect of roughness is not pronounced; 2) when ignited are the individual protrusions; and 3) in the intermediate region between the first two. Critical ignition conditions: ignition time and ignition criterion, are determined for the three regimes. The results are compared with the results for the one-dimensional ignition of the semi-infinite body. It is shown, that the effect of geometry on ignition results in the considerable reduction of ignition delay, and the amount of energy required for the successful ignition is less compared to the one- dimensional case.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.45-52
• /
• 2006

The AITs(autoignition temperatures) describe the minimum temperature to which a substance must be heated, without the application of a flame or spark, which will cause that substance to ignite. The AITs are often used as a factor in determining the upper temperature limit for processing operations and conditions for handling, storage and transportation, and in determining potential fire hazard from accidental contact with hot surfaces. The measurement AITs are dependent upon many factors, namely initial temperature, pressure, volume, fuel/air stoichiometry, catalyst material, concentration of vapor, time lag. Therefore, the AITs reported by different ignition conditions are sometimes significantly different. This study measured the AITs of benzene, toluene and xylene isomers from time lag using AS1M E659-78 apparatus. The experimental ignition delay times were a good agreement with the calculated ignition delay times by the proposed equations wtih a few A.A.D.(average absolute deviation). Also The experimental AITs of benzene, toluene, o-xylene, m-xylene and p-xylene were $583^{\circ}C,\;547^{\circ}C,\;480^{\circ}C,\;587^{\circ}C,\;and\;557^{\circ}C$, respectively.

• 한국안전학회지
• /
• 제29권6호
• /
• pp.55-61
• /
• 2014

The autoignition temperature (AIT) of a material is the lowest temperature at which the substance will spontaneously ignite in the absence of an external ignition source such as a spark or flame. The AIT may be used as combustion property to specify operating, storage, and materials handling procedures for processs safety. This study measured the AITs of n-Propanol+n-Decane system from ignition delay time(time lag) by using ASTM E659 apparatus. The AITs of n-Propanol and n-Decane which constituted binary system were $435^{\circ}C$ and $212^{\circ}C$, respectively. The experimental AITs of n-Propanol+n-Decane system were a good agreement with the calculated AITs by the proposed equations with a few A.A.D(average absolute deviation).

• 한국산업융합학회 논문집
• /
• 제21권2호
• /
• pp.45-51
• /
• 2018

Compression ignition diesel engine can reduce carbon emission than gasoline engine in case of high efficiency, output and durability. So, compression ignition diesel engine is used in various fields such as automobiles, industries and so on. Due to reducing of emission exhaust by Developing of injection and combustion type of diesel engine, emission of pollution substance is developed compared the past. Moreover, its efficiency and reduce of carbon emission is better than gasoline engine and it is used in power source of industries, transports and others because of its high efficiency and durability nowadays. In this study, we experiment by making and designing of compression ignition diesel engine witch has air-cooling, 2 cylinder and 2 strokes.