• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.381-388
• /
• 2003

Location tracking is used to keep track of the location information of a mobile terminal in an idle state for a cail setup between mobile terminals. In this paper, we introduce a location update algorithm based on the call arrival history, which is appropriate for a variable call arrival rate over time. The location tracking strategy which uses the proposed algorithm can find changes in the call arrival rate by maintaining a call arrival history of a mobile terminal, from which a mobile terminal can calculate an appropriate timeout interval for a variable call arrival rate. We show that the proposed scheme is appropriate for a variable call arrival rate by presenting a simple analytical model and analytical results to investigate its performance for both a fixed and a variable call arrival rate.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.706-713
• /
• 2002

In the multi-pass welding of pressure vessels or ships, the mechanical touch sensor system is generally used together with a manipulator to measure the gap and depth of the narrow gap to perform seam tracking. Unfortunately, such mechanical touch sensors may commit measuring errors caused by the eterioration of the measuring device. An automation system of narrow gap multi-pass welding using a laser vision system which can track the seam line of narrow gap and which can control welding power has been developed. The joint profile of the narrow gap, with 250mm depth and 28mm width, can be captured by laser vision camera. The image is then processed for defining tracking positions of the torch during welding. Then, the real-time correction of lateral and vertical position of the torch can be done by the laser vision system. The adaptive control of welding conditions like welding Currents and welding speeds, can also be performed by the laser vision system, which cannot be done by conventional mechanical touch systems. The developed automation system will be adopted to reduce the idle time of welders, which happens frequently in conventional long welding processes, and to improve the reliability of the weld quality as well.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.6
• /
• pp.1113-1132
• /
• 2011

In wireless sensor networks (WSNs), most energy saving asynchronous MAC protocols are custom tailored for unicast communications only. However, broadcast protocols are very commonly used in WSNs for a variety of functionalities, such as gathering network topology information, event monitoring and query processing. In this paper, we propose a novel low-power asynchronous broadcast MAC protocol called Alarm Broadcast (A-CAST). A-CAST employs the strobe preamble that specifies the residual waiting time for the following data transmission. Each receiver goes back to sleep upon hearing the strobe preamble for the residual time duration, to conserve energy and to wake up just before data transmission starts. We compute the energy consumption of A-CAST via rigorous mathematical analysis. The analytic results show that A-CAST outperforms B-CAST, a simple broadcast extension of the well-known B-MAC. We also implement A-CAST on sensor motes and evaluated its performance through real experiments. Our experimental results show that A-CAST reduces the energy consumption by up to 222% compared to the previously proposed protocols.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.2
• /
• pp.1-8
• /
• 2012

We propose a new frame length control scheme for cognitive radio systems. In the proposed algorithm, the property that the probability of a primary packet arrival continually increases as time elapses during the primary user's idle period is utilized. When reducing the secondary frame length in accordance with the increasing primary packet arrival probability, spectrum sensing is conducted more frequently as time elapses and the primary packet arrival is detected more quickly. We obtain the optimal frame lengths by maximizing the secondary throughput while satisfying the interference constraint. Numerical results show a significant throughput enhancement via the frame length control.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.6
• /
• pp.714-719
• /
• 2011

The surface roughness depending on the machining method is very important because is produce a finished product through riveting, sealing, bonding, and special paint in order to curb the turbulence and air resistance which occur between the sheets. Aluminum alloy 2024 which is widely used for interior and exterior material of aircraft are tested. Jin-young JW-60C wire cutting machine was used in this experiment. In this paper, the experimental investigation has been performed to find out the influence of the surface roughness and surface shape characteristics on the wire-cut EDM of discharge energy in aluminium alloy 2024. The selected experimental parameters are peak current, no-load voltage, off time and feed rate. The experimental results give the guideline for selecting reasonable machining parameters. The high discharge energy on the idle time, almost no change in surface roughness can be seen.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.5
• /
• pp.561-568
• /
• 2014

The Republic of Korea Army is using R-NAD of MIL-STD-188-220 as a Media Access Control protocol. Under urgent situations, almost all stations transmit data frames and then the network will reach a saturation state. Several articles have been devoted to the study of R-NAD performance. However, most of them focus on comparing the performance of some NADs using network simulation tools. We propose an analytical model to compute the throughput of R-NAD under the assumption of a network traffic saturation. Analytical results were verified by Monte Carlo methods. We have shown that the performance of a success probability and an average idle time remains almost unchanged as the total number of stations increases. We have also shown that Type 1/2/4 operation mode outperforms Type 3 operation mode in throughput. The results showed that the system with a squelch detection achieved a better performance than the one without it. The longer DATA time had a higher throughput.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.12
• /
• pp.4269-4292
• /
• 2014

Currently, increasing numbers of access points (AP) are being deployed in enterprise offices, campuses and municipal downtowns for flexible Internet connectivity, but most of these access points are idle or redundant most of the time, which causes significant energy waste. Therefore, with respect to power conservation, applying energy efficient strategies in WIFI networks is strongly advocated. One feasible method is dynamically managing network resources, particularly APs, by powering devices on or off. However, when an AP is powered on, the device is initialized through a long boot time, during which period clients cannot be associated with it; therefore, the network performance would be greatly impacted. In this paper, based on a global view of an entire WLAN, we propose an AP selection technology, known as Temporary Access Selection (TAS). The criterion of TAS is a fusion metric consisting of two evaluation indexes which are based on throughput and battery life, respectively. TAS is both service and clients' preference specific through balancing the data rate, battery life and packet size. TAS also works well independently in traditional WLANs in which no energy efficient strategy is deployed. Moreover, this paper demonstrates the feasibility and performance of TAS through experiments and simulations with Network Simulator version 3 (NS3).

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.6 no.8
• /
• pp.63-71
• /
• 1983

Aggregate planning coordinate the control variable over long-term to apply a demand variable and forcasting. In order to necessary the goal that doesn't make an inter-contradiction and explicitly defined. We made a considerable point of system approach for scheduling establishment. It include the control variables of aggregate planning : 1) employment 2) over time working and idle time 3) inventory 4) delivery delay S) subcontract 61 long - term facility capacity. Each variables composed of pure strategy as like a decision of inventory level, a change of employment level, etc. md alternative costs make a computation on the economic foundation. But the optimum alternative costs represent the mixed pure strategy. The faults of this method doesn't optimum guarantee a special scheduling as well as increasing a number of alternative combination. Theoretical, Linear Decision Rule make an including all variables, but it is almost impossible for this model to develope actually And also make use of the aggregate planning problem for developing system approach : LDR, heuristic model, Search Decision Rule, all kind of computers, simulation. But these models are very complex, each variables get an extremely inter-dependence. So this study be remained by theory level, some approach methods has not been brought the optimum solution to apply in every cases.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.257-262
• /
• 2001

A new WDM-based protocol for scheduling a variable-length message is proposed in this paper Two control channels, reservation slot and control slot, are used to coordinate transmission and diminish the collisions of packet to minimize the across delay. When an idle control slot is available, control packet is transmitted on that slot and message is transferred. And the node continues to transmit its control packet through the corresponding slot every cycle, until the message is completely transmitted. If any control slot is not available, the node schedules the transmission time of message in earliest available time using reservation slots. The proposed scheduling algorithm shows better performance and lower access delay.

• Korean Institute of Interior Design Journal
• /
• v.21 no.6
• /
• pp.35-45
• /
• 2012

As the importance of economic value of culture has increased, governments have set a strategy to secure national competitiveness through cultural art. One of concrete ways is establishing a cultural space by using idle facilities. This study aims to analyze publicness of Seoul Art Space, suggest ways to improve the facilities of creative space and provide basic date for the further plan of creative space. The object of this study is 8 facilities from Seoul Art Space which is operated by City of Seoul. Through literature review, we extracted 5 elements(each element has 4 sub categories) for publicness(accessibility, openness, convenience, historical connectivity and stay time) and to evaluates publicness of the Seoul Art Space, we analyzed these facilities based on these elements. The results are as follows: The publicness of Seoul Art Space acquired 96.9%(100% is 64 points) for stay time, 95.3% for convenience, 90.6% for accessibility, 73.4% for openness and 62.5% for historical connectivity. For the openness, we suggest to use glass materials and open the space to the public. To improve historical connectivity, we suggest to determine appropriate theme for a particular space or area and set a function of buildings for the differentiation.