• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.427-430
• /
• 2002

The present parer outlines the system identification and vibration control performance of air traffic control tower of Yangyang international airport with tuned mass damper(TMD). From the free vibration test, natural frequency, damping ratio and mode shape of tower are obtained and these values are compared with the values from numerical analysis. In the vibration control test to evaluate the vibration control performance, equivalent damping ratio increased by tuned mass damper are obtained in case the TMD is operated as passive mode. Damping ratio of tower evaluated from free vibration test is about $1.0{\%}$. It is very low value than damping ratio recommended in general code. Damping ratio of passive mode is about $5{\%}$. These equivalent damping ratio increased by TMD is enough to enhance the serviceability of tower structure under wind load.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.04a
• /
• pp.139-146
• /
• 1998

The prototype ASME III motor actuated Y-type globe valve has been tested to identify dynamic characteristics. The valve is Seismic Category I equipment and has the function to control water flow in the safety-related system. In this study, two different types of structural identification test i.e. swept sine and broadband random, have been performed at various levels of excitation to verify the effects of test method and excitation level on cross coupling effect as well as natural frequencies and damping values. It was found that swept sine test and broadband random test showed similar natural frequencies, and that the primary interaction was exhibited between horizontal and vertical axes.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.119-122
• /
• 2003

In this Study, the types of PSD performance test systems were reviewed. And as a results of that reviewing process, a suitable PSD performance test system type for PSD design was proposed. PSD performance test systems can be classified with pulsating methods - the pulsating whole feeding system and the pulsating working fluid. The pulsating working fluid method can be re-classified with the devices of pulsating working fluid - a piston-type pulsator and a restrict-type pulsator. The pulsating-working-fluid performance test system with restrict-type pulsator was proposed to be a suitable type for identification of main-design-parameters.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.49-54
• /
• 2002

This paper describes a systematic way of simultaneously identifying the ambient pore pressure and the rigidity index (=G/s$\_$u/) of soil by applying an optimization technique to the piezocone dissipation test result. An ambient pore pressure and optimal rigidity index were determined by minimizing the differences between theoretical excess pore pressures developed by Randolph ＆ Wroth(1979) and measured excess pore pressures from piezocone using optimization technique. The effectiveness of the proposed back-analysis method was examined against the well-documented performance of piezocone dissipation tests (Tanaka ＆ Sakagami, 1989), from the viewpoints of proper determination of selected target parameters and saving of test duration. It is shown that the proposed back-analysis method can evaluate properly the ambient pore pressure and the rigidity index by using only the early phase of the dissipation test data. Also, it is shown that with the optimized rigidity index and ambient pore pressure the proposed back-analysis method permits the horizontal coefficient of consolidation to be identified rationally.

• Nuclear Engineering and Technology
• /
• v.50 no.8
• /
• pp.1412-1420
• /
• 2018

An experiment was performed using the large-scale test facility (LSTF), which simulated a 1% vessel upper head small-break loss-of-coolant accident with an accident management (AM) measure under an assumption of total-failure of high-pressure injection (HPI) system in a pressurized water reactor (PWR). In the LSTF test, liquid level in the upper head affected break flow rate. Coolant was manually injected from the HPI system into cold legs as the AM measure when the maximum core exit temperature reached 623 K. The cladding surface temperature largely increased due to late and slow response of the core exit thermocouples. The AM measure was confirmed to be effective for the core cooling. The RELAP5/MOD3.3 code indicated insufficient prediction of primary coolant distribution. The author conducted uncertainty analysis for the LSTF test employing created phenomena identification and ranking table for each component. The author clarified that peak cladding temperature was largely dependent on the combination of multiple uncertain parameters within the defined uncertain ranges.

• Korean Journal of Radiology
• /
• v.22 no.11
• /
• pp.1918-1928
• /
• 2021

Objective: With the recent development of various MRI-conditional cardiac implantable electronic devices (CIEDs), the accurate identification and characterization of CIEDs have become critical when performing MRI in patients with CIEDs. We aimed to develop and evaluate a deep learning-based algorithm (DLA) that performs the detection and characterization of parameters, including MRI safety, of CIEDs on chest radiograph (CR) in a single step and compare its performance with other related algorithms that were recently developed. Materials and Methods: We developed a DLA (X-ray CIED identification [XCID]) using 9912 CRs of 958 patients with 968 CIEDs comprising 26 model groups from 4 manufacturers obtained between 2014 and 2019 from one hospital. The performance of XCID was tested with an external dataset consisting of 2122 CRs obtained from a different hospital and compared with the performance of two other related algorithms recently reported, including PacemakerID (PID) and Pacemaker identification with neural networks (PPMnn). Results: The overall accuracies of XCID for the manufacturer classification, model group identification, and MRI safety characterization using the internal test dataset were 99.7% (992/995), 97.2% (967/995), and 98.9% (984/995), respectively. These were 95.8% (2033/2122), 85.4% (1813/2122), and 92.2% (1956/2122), respectively, with the external test dataset. In the comparative study, the accuracy for the manufacturer classification was 95.0% (152/160) for XCID and 91.3% for PPMnn (146/160), which was significantly higher than that for PID (80.0%,128/160; p < 0.001 for both). XCID demonstrated a higher accuracy (88.1%; 141/160) than PPMnn (80.0%; 128/160) in identifying model groups (p < 0.001). Conclusion: The remarkable and consistent performance of XCID suggests its applicability for detection, manufacturer and model identification, as well as MRI safety characterization of CIED on CRs. Further studies are warranted to guarantee the safe use of XCID in clinical practice.

• The Journal of the Korean Society for Microbiology
• /
• v.7 no.1
• /
• pp.1-8
• /
• 1972

The authors made a study on the bacteriological identification about unidentified strains which were roughly screened by local health center, which an epidemic diarrhea was outbreak at Ham Yang Gun, Kyeongsang-Namdo in July 1971. And the authors made an attempt to bacteriological Identification, serotyping with slide agglutination, and determination of the susceptibility of identified strains to various chemotherapeutic agents. The results Were obtained as follows: 1. The isolated strains identified Shigella flexneri type 2b(2 strains) and Salmonella paratyphi B(4 strains). 2. Sensitivity test using with three concentrations chemotherapeutic agents(Paper disk used; Eiken chemical Co., Tokyo, Japan): (1) Shigella flexneri type 2b isolated strains were sensitive to kanamycin, colistin(100%) and penicllin(50%) respectively, but resistant to erythromycin, oleandomycin, leucomycin, chloramphenicol, tetracycline, dihydrostreptomycin and sulfadimethoxin(100%) respectively. (2) Salmonella paratyphi B isolated strains were sensitive to chloramphenicol, tetracycline, dihydrostreptomycin, kanamycin, sulfadimethoxine(100%) and colistin(50%) respectively, but resistant to penicillin, erythromycin, oleandomycin and leucomycin(100%) respectively. 3. Sensitivity test using with multodisk urinary code(Paper disk used; Oxoid, London): (1) Shigella flexneri type 2b isolated strains were sensitive to Bactrim, ampicillin, nitrofurantoin, nalidixic add and gentamicin(100%) respectively, but resistant to chloramhpenicol, tetracycline, sulfadiazine and Fanasil(100%) respectively. (2) Salmonell paratyphi B isolated strains were sensitive to Bactrim, chloramphenicol, ampicillin, nitrofurantoin, tetracycline, nalidixic acid, gentamicin(100%) and sulfadiazine(50%) respectively, but resistant to Fanasil(100%) and sulfadiazine(50%) respectively.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.4
• /
• pp.222-226
• /
• 2011

This study was conducted to identify the characteristics of analytical errors shown in the Korean quality control program on bulk asbestos analyses using polarized light microscopy (PLM). 179 participating laboratories were required to analyze 4 samples respectively and asked to classify each test sample as asbestos-containing (positive) or non-asbestos-containing (negative). For positive samples, participants were also asked to identify the type and semiquantitate the contents of asbestos present. The test results showed 21 (4%) false negative errors among 562 samples, 9 (6%) false positive errors among 154 samples and 53 (9%) asbestos identification errors among 562 samples. Most of false negative and positive errors were observed in a few types of samples. Higher frequencies of asbestos identification errors were shown in samples containing two or more types of asbestos and samples containing anthophyllite, tremolite or actinolite asbestos. For semiquantitative analyses, the ratios of mean to nominal weight contents were 2.1 for chrysotile and 2.9 for amphiboles. A tendency of over-estimation was observed in semiquantitative analyses using the visual estimation technique and higher in case of analyzing samples containing amphiboles than chrysotile. Coefficients of variation (CVs) of semiquantitative analytical results were 0.44~0.83 and 0.5~1.14 for samples containing chrysotile and amphibole asbestos, respectively.

• The Plant Pathology Journal
• /
• v.35 no.6
• /
• pp.654-661
• /
• 2019

The soybean cyst nematode, Heterodera glycines, is a major plant-parasitic nematode that has caused important economic losses to Korea's soybean production. Four species of cyst nematodes, H. schachtii, H. glycines, H. trifolii, and H. sojae, all belong to schachtii group are coexist in field soil in Korea. The rapid identification of the nematode is crucial for preventing crop damage and in decision making for controlling this nematode. This study aimed to develop a species-specific primer set for quantitative PCR (qPCR) assay of H. glycines. The specific primer set (HGF1 and HGR1) for H. glycines was designed based on the cytochrome c oxidase subunit I (COI) sequence of mitochondrial DNA. After optimization, it is possible to identify the H. glycines using a qPCR assay with DNA extracted from a single cyst and single second-stage juvenile (J2). The specificity was confirmed by the absence of SYBR fluorescent signals of three other Heterodera species. A serial dilution of DNA extracted from a single cyst was obtained for the sensitivity test. The result showed that the standard curve of the test had a highly significant linearity between DNA concentration and Ct value (R² = 0.996, slope = -3.49) and that the detection limit concentration of DNA of the primer set was 10 pg of DNA per reaction. Our findings suggested that H. glycines could be distinguished from H. sojae and other Heterodera species when a qPCR assay is used with a specific primer set.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.31 no.3
• /
• pp.173-181
• /
• 2017

The aim of this study was to identify the reliability and the validity of Five Organs Questionnaire (FOQ). In this study, 335 data was collected from early adulthood of A-city, D-city and C-city in South Korea from Dec. 2016 to Jan. 2017, and the collected data was analyzed with SPSS 23.0 software. The result showed that the Cronbach's ${\alpha}$ of five organs was 0.775-0.853. The reliabilities of test and retest Intra Correlation Coefficient (ICC) for the five organs were .891-.929 in pattern identification and .874-.930 in functional evaluation, respectively. Each organ was divided by two factors, and the factor loadings of Liver, Heart, Spleen, Lung and Kidney were 52.973%, 54.534%, 57.060%, 53.803%, and 46.337%, respectively. The functional evaluation of five organs was associated with self-rated health status as r was -.443 to -.583(p<.001), and quality of life as r was -.5.17 to -.716(p<.001), respectively. The test-retest diagnostic agreement was 67.2% and Kappa was 0.562. This study revealed that FOQ is a reliable and valid questionnaire.