• Journal of Science Education
• /
• v.38 no.3
• /
• pp.555-568
• /
• 2014

Even though identical science textbooks are used in elementary science classes, differences exist in teachers' teaching practices. The purpose of this study was to understand the relationships between elementary teachers' beliefs of science learning and their science teaching practices. An Likert-scale survey and interviews were performed on four elementary teachers to obtain information about the beliefs of teachers in science learning. In order to understand their teaching practices and the relationships between teachers' beliefs and their teaching practices, 2 classes per each teacher were recorded and instruction analyses were performed in the aspects of teaching contents, methods, and learning environments. The results showed that teacher A and B, who held traditional beliefs of science learning, taught their classes mainly based on teacher's explanation. While, teacher C and D, who held constructive beliefs of science learning, reorganized the contents of textbooks and applied various teaching methods and strategies in conducting their teaching practices. There were differences in teachers' beliefs of science learning and teaching practices. These differences in beliefs were related with their science teaching practices.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.191-195
• /
• 2020

In this work, tensile tests, one of the most common test method to assess the condition of a corroded pipe, were conducted. According to ASTM E8 method, the use of flat or curved uni-axial tension test is allowed under the recommendation with the usage of grips corresponding to a curvature of the pipe. However, this method is not for corroded specimen. Furthermore, in the case of performing the multiple tensile tests with various curvatures, it is desirable not to produce zigs that fit each curvatures, if merely processing the specimen grip with curvature into the flat grip can show almost identical tensile behavior. Therefore, various tension simulations were conducted first to check if there exist any differences. Also, experiments on corroded tensile specimen were conducted and compared with the FEM simulation that reflects the actual geometry acquired from the 3D scanner.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.125-125
• /
• 2011

In this study, we investigated the electrical, optical, structural, and surface properties of indium zinc oxide (IZO)/Ag/IZO multilayer electrode grown by specially designed roll-to-roll sputtering system using the flexible substrate. By the continuous roll-to-roll sputtering of the bottom IZO, Ag, and top IZO layers at room temperature, they were able to fabricate a high quality IZO/Ag/IZO multilayer electrode. At optimized conditions, the bottom IZO layer (40 nm) was deposited on a flexible substrate. After deposition of the Bottom IZO layer, Ag layer was deposited onto the bottom IZO film as a function of DC power (200~500 W). Subsequently, the top IZO layer was deposited onto the Ag layer at identical deposition conditions to the bottom IZO layer (40 nm). We investigated the characteristics of IZO/Ag/IZO multilayer electrode as a function of Ag thickness. It was found that the electrical and optical properties of IZO/Ag/IZO multilayer electrode was mainly affected thickness of the Ag layer at optimized condition. In case of IZO/Ag/IZO multilayer electrode with the Ag power (350W), it exhibited a low sheet resistance of 7.1 ohm/square and a high transparency of 86.4%. Furthermore, we fabricated the touch screen panel using the IZO/Ag/IZO multilayer electrode, which demonstrate the possibility of the IZO/Ag/IZO multilayer electrode grown by roll-to-roll sputtering system as a transparent conducting layer in the touch screen panel.

• Fire Science and Engineering
• /
• v.17 no.3
• /
• pp.61-73
• /
• 2003

Most of the accidents occurred from the chemical plants are related to the catastrophic gas release events when the large amount of toxic materials is leaked from its storage tank or transmitting pipe lines. In this case, the greatest concerns are how the spreading behaviors of leakages are depended on the ambient conditions such as air stability and other environmental factors. Hence, we have focused on the risk assessments and consequential analysis for chlorine as an illustrative example. As appeared in the result, Fire & Explosion Index depicted it a bit dangerous with presenting the comprehensive degrees of hazard 90.7. And as a result of Phast6.0/ALOHA, the trends of each scenario appeared considerably identical although there are some differences in the resulting effects according to the input data for the Gas Model. The consequence analysis is performed numerically based on the dense gas mode. In the future, using more correct input data, material properties, and topographical configuration, the method of this research will be useful for the guideline of the risk assessment when the release of toxicants breaks out.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.4
• /
• pp.1-9
• /
• 2007

Sensitivity analysis of wind resource micrositing has been performed through the application case at the Antarctic King Sejong station with the most representative micrositing softwares: WAsP, WindSim and Meteodyn WT. The wind data obtained from two met-masts separated 625m were applied as a climatology input condition of micro-scale wind mapping. A tower shading effect on the met-mast installed 20m apart from the warehouse has been assessed by the CFD software Fluent and confirmed a negligible influence on wind speed measurement. Theoretically, micro-scale wind maps generated by the two met-data located within the same wind system and strongly correlated meteor-statistically should be identical if nothing influenced on wind prediction but orography. They, however, show discrepancies due to nonlinear effects induced by surrounding complex terrain. From the comparison of sensitivity analysis, Meteodyn WT employing 1-equation turbulence model showed 68% higher RMSE error of wind speed prediction than that of WindSim using the ${\kappa}-{\epsilon}$ turbulence model, while a linear-theoretical model WAsP showed 21% higher error. Consequently, the CFD model WindSim would predict wind field over complex terrain more reliable and less sensitive to climatology input data than other micrositing models. The auto-validation method proposed in this paper and the evaluation result of the micrositing softwares would be anticipated a good reference of wind resource assessments in complex terrain.

• The Korean Journal of Zoology
• /
• v.16 no.2
• /
• pp.97-108
• /
• 1973

Karyological characteristics and relative DNA values were investigated in four species of the family Cyprinidae of Korean fresh-water. The results obtained were as follows; 1) The two Hemibarus species, H. longirostris and H. labeo, had the aiploid chromosome number of 50. The compliment of former consisted of 7 metacentric, 14 submets- and subtelocentric and 4 telo- or acrocentric pairs, whereas latter had 9, 11 and 5 pairs respectively, Total arm numbers (AN) were 92 and 90. 2) In the case of two species of genus Moroce, M. oxycephalus and M. lagowskii, their diploid number and karyotype showed in identical pattern for each other (2n=50); 6 pairs of metacentrics, 14 pairs of submeta- and subtelocentrics and 5 pairs of telo- or acrocentrics. The AN of both species were 90. 3) Relative DNA values of all species were measured as about 60% that of gold fish. From the above observation, the cytogenetical character was discussed with special concern to the phylogenetic significance.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.3
• /
• pp.185-190
• /
• 2011

The principal objective of this study was to develop a discrimination method using SSR markers in Korean ginseng cultivars. Five cultivars--Chunpoong, Yunpoong, Gopoong, Sunpoong, and Kumpoong--were evaluated by nine markers out of 22 SSR markers. A total of 23 alleles were detected, ranging from 1 to 4, with an average of 2.6 alleles per locus, and an averages of gene diversity (GD) of 0.480. Nine markers were tested in order to distinguish among five Korean ginseng cultivars. Two markers out of nine SSR markers, GB-PG-065 and GB-PG-142, were selected as key markers for discrimination among Korean ginseng cultivars. Two genotypes were detected in GB-PG-065. Chunpoong and Kumpoong shared the same allele type, and Yunpoong, Gopoong, and Sunpoong shared another identical allele type. In the case of GB-PG-142, a specific allele type differentiated from those of other four cultivars was observed only in Sunpoong cultivar. Consequently, the SSR markers developed in this study may prove useful for the identification of Korean ginseng cultivars and the development of ginseng seed management systems, as well as tests to guarantee the purity of ginseng seeds.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.8
• /
• pp.441-446
• /
• 2005

This paper presents the changes of acoustic scattering pattern from a single cylinder and two identical cylinders in both theoretical calculations and experimental measurements. Bi-static scattering pattern by single cylinder and two parallel cylinders (length 2m, radius 30mm) was measured in $5m\times5m\times5m$ water tank using high frequency projector (120 kHz) and hydrophone. The results show similar agreement between experiment and theory. In case of single cylinder scattering. omni-directional pattern was observed in backward but there are fluctuations or target strength in forward. Interference between each cylinder's scattering fields produce fluctuations of target strength in all directions of two cylinders.

• Journal of the Korean Magnetics Society
• /
• v.10 no.6
• /
• pp.310-317
• /
• 2000

With use of (G)MR head, thermal asperity (TA) has been a big concern in drive industry. In this study, we investigated several factors of heads and disks which affects the TA sensitivity of the drive. TA experiments were conducted by introducing the particles on the drives using a particle injection chamber. It was found that the slider ABS shape can help to reduce TA or contamination in the head/media interface. However, TA sensitivity of the drive mainly depend on the intrinsic property of (G)MR sensor. GMR head is much less sensitive to TA compared with MR head. However, in case that the same bias current was applied for both of MR and GMR head, TA sensitivity of GMR head became almost identical to that of MR head. Therefore it was found that the bias current is a dominant factor in determining TA sensitivity of the head. TA sensitivity of different types of disks was also studied. The scratch resistance of the carbon overcoat layer is the one of the main factors which influence TA rejection capability of the disks.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.2
• /
• pp.306-315
• /
• 2017

Metabolic engineering with a high-yielding mutant, A. terreus AN37, was performed to enhance the production of itaconic acid (IA). Reportedly, the gene cluster for IA biosynthesis is composed of four genes: reg (regulator), mtt (mitochondrial transporter), cad (cis-aconitate decarboxylase), and mfs (membrane transporter). By overexpressing each gene of the IA gene cluster in A. terreus AN37 transformed by the restriction enzyme-mediated integration method, several transformants showing high productivity of IA were successfully obtained. One of the AN37/cad transformants could produce a very high amount of IA (75 g/l) in shake-flask cultivations, showing an average of 5% higher IA titer compared with the high-yielding control strain. Notably, in the case of the mfs transformants, a maximal increase of 18.3% in IA production was observed relative to the control strain under the identical fermentation conditions. Meanwhile, the overexpression of reg and mtt genes showed no significant improvements in IA production. In summary, the overexpressed cis-aconitate decarboxylase (CAD) and putative membrane transporter (MFS) appeared to have positive influences on the enhanced IA productivity of the respective transformant. The maximal increases of 13.6~18.3% in IA productivity of the transformed strains should be noted, since the parallel mother strain used in this study is indeed a very high-performance mutant that has been obtained through intensive rational screening programs in our laboratory.